Physical modeling and characterization of the halo phenomenon in night vision goggles. Thomas, P. J., Allison, R., Carr, P., Shen, E., Jennings, S., Macuda, T., Craig, G., & Hornsey, R. In Helmet- and Head-Mounted Displays X: Technologies and Applications, volume 5800, of Proceedings of the Society of Photo-Optical Instrumentation Engineers (SPIE), pages 21-31, Orlando, FL, 2005. SPIE-Int Soc Optical Engineering. ![Physical modeling and characterization of the halo phenomenon in night vision goggles [link]](https://bibbase.org/img/filetypes/link.svg "link")
-1 -2 doi abstract bibtex When a bright light source is viewed through Night Vision Goggles (NVG), the image of the source can appear enveloped in a ``halo'' that is much larger than the ``weak-signal'' point spread function of the NVG. The halo phenomenon was investigated in order to produce an accurate model of NVG performance for use in psychophysical experiments. Halos were created and measured under controlled laboratory conditions using representative Generation III NVGs. To quantitatively measure halo characteristics, the NVG eyepiece was replaced by a CMOS imager. Halo size and intensity were determined from camera images as functions of point-source intensity and ambient scene illumination. Halo images were captured over a wide range of source radiances (7 orders of magnitude) and then processed with standard analysis tools to yield spot characteristics. The spot characteristics were analyzed to verify our proposed parametric model of NVG halo event formation. The model considered the potential effects of many subsystems of the NVG in the generation of halo: objective lens, photocathode, image intensifier, fluorescent screen and image guide. A description of the halo effects and the model parameters are contained in this work, along with a qualitative rationale for some of the parameter choices.
@inproceedings{allison200521-31,
abstract = {When a bright light source is viewed through Night Vision Goggles (NVG), the image of the source can appear enveloped in a {``}halo{''} that is much larger than the {``}weak-signal{''} point spread function of the NVG. The halo phenomenon was investigated in order to produce an accurate model of NVG performance for use in psychophysical experiments. Halos were created and measured under controlled laboratory conditions using representative Generation III NVGs. To quantitatively measure halo characteristics, the NVG eyepiece was replaced by a CMOS imager. Halo size and intensity were determined from camera images as functions of point-source intensity and ambient scene illumination. Halo images were captured over a wide range of source radiances (7 orders of magnitude) and then processed with standard analysis tools to yield spot characteristics. The spot characteristics were analyzed to verify our proposed parametric model of NVG halo event formation. The model considered the potential effects of many subsystems of the NVG in the generation of halo: objective lens, photocathode, image intensifier, fluorescent screen and image guide. A description of the halo effects and the model parameters are contained in this work, along with a qualitative rationale for some of the parameter choices.},
address = {Orlando, FL},
author = {Thomas, P. J. and Allison, R.S. and Carr, P. and Shen, E. and Jennings, S. and Macuda, T. and Craig, G. and Hornsey, R.},
booktitle = {Helmet- and Head-Mounted Displays X: Technologies and Applications},
date-modified = {2012-07-02 22:24:47 -0400},
doi = {10.1117/12.602736},
editor = {Rash, C. E.},
keywords = {Night Vision},
pages = {21-31},
publisher = {SPIE-Int Soc Optical Engineering},
series = {Proceedings of the Society of Photo-Optical Instrumentation Engineers (SPIE)},
title = {Physical modeling and characterization of the halo phenomenon in night vision goggles},
url-1 = {http://dx.doi.org/10.1117/12.602736},
url-2 = {http://dx.doi.org/10.1117/12.602736},
volume = {5800},
year = {2005},
url-1 = {https://doi.org/10.1117/12.602736}}
Downloads: 0
{"_id":{"_str":"51fbd288c5b22c387600101f"},"__v":5,"authorIDs":["5458111c2abc8e9f37000a4d","5e596c1656d60ade0100014f","vnY8GQ5AKXHNi7dqd"],"author_short":["Thomas, P. J.","Allison, R.","Carr, P.","Shen, E.","Jennings, S.","Macuda, T.","Craig, G.","Hornsey, R."],"bibbaseid":"thomas-allison-carr-shen-jennings-macuda-craig-hornsey-physicalmodelingandcharacterizationofthehalophenomenoninnightvisiongoggles-2005","bibdata":{"bibtype":"inproceedings","type":"inproceedings","abstract":"When a bright light source is viewed through Night Vision Goggles (NVG), the image of the source can appear enveloped in a ``halo'' that is much larger than the ``weak-signal'' point spread function of the NVG. The halo phenomenon was investigated in order to produce an accurate model of NVG performance for use in psychophysical experiments. Halos were created and measured under controlled laboratory conditions using representative Generation III NVGs. To quantitatively measure halo characteristics, the NVG eyepiece was replaced by a CMOS imager. Halo size and intensity were determined from camera images as functions of point-source intensity and ambient scene illumination. Halo images were captured over a wide range of source radiances (7 orders of magnitude) and then processed with standard analysis tools to yield spot characteristics. The spot characteristics were analyzed to verify our proposed parametric model of NVG halo event formation. The model considered the potential effects of many subsystems of the NVG in the generation of halo: objective lens, photocathode, image intensifier, fluorescent screen and image guide. A description of the halo effects and the model parameters are contained in this work, along with a qualitative rationale for some of the parameter choices.","address":"Orlando, FL","author":[{"propositions":[],"lastnames":["Thomas"],"firstnames":["P.","J."],"suffixes":[]},{"propositions":[],"lastnames":["Allison"],"firstnames":["R.S."],"suffixes":[]},{"propositions":[],"lastnames":["Carr"],"firstnames":["P."],"suffixes":[]},{"propositions":[],"lastnames":["Shen"],"firstnames":["E."],"suffixes":[]},{"propositions":[],"lastnames":["Jennings"],"firstnames":["S."],"suffixes":[]},{"propositions":[],"lastnames":["Macuda"],"firstnames":["T."],"suffixes":[]},{"propositions":[],"lastnames":["Craig"],"firstnames":["G."],"suffixes":[]},{"propositions":[],"lastnames":["Hornsey"],"firstnames":["R."],"suffixes":[]}],"booktitle":"Helmet- and Head-Mounted Displays X: Technologies and Applications","date-modified":"2012-07-02 22:24:47 -0400","doi":"10.1117/12.602736","editor":[{"propositions":[],"lastnames":["Rash"],"firstnames":["C.","E."],"suffixes":[]}],"keywords":"Night Vision","pages":"21-31","publisher":"SPIE-Int Soc Optical Engineering","series":"Proceedings of the Society of Photo-Optical Instrumentation Engineers (SPIE)","title":"Physical modeling and characterization of the halo phenomenon in night vision goggles","url-1":"https://doi.org/10.1117/12.602736","url-2":"http://dx.doi.org/10.1117/12.602736","volume":"5800","year":"2005","bibtex":"@inproceedings{allison200521-31,\n\tabstract = {When a bright light source is viewed through Night Vision Goggles (NVG), the image of the source can appear enveloped in a {``}halo{''} that is much larger than the {``}weak-signal{''} point spread function of the NVG. The halo phenomenon was investigated in order to produce an accurate model of NVG performance for use in psychophysical experiments. Halos were created and measured under controlled laboratory conditions using representative Generation III NVGs. To quantitatively measure halo characteristics, the NVG eyepiece was replaced by a CMOS imager. Halo size and intensity were determined from camera images as functions of point-source intensity and ambient scene illumination. Halo images were captured over a wide range of source radiances (7 orders of magnitude) and then processed with standard analysis tools to yield spot characteristics. The spot characteristics were analyzed to verify our proposed parametric model of NVG halo event formation. The model considered the potential effects of many subsystems of the NVG in the generation of halo: objective lens, photocathode, image intensifier, fluorescent screen and image guide. A description of the halo effects and the model parameters are contained in this work, along with a qualitative rationale for some of the parameter choices.},\n\taddress = {Orlando, FL},\n\tauthor = {Thomas, P. J. and Allison, R.S. and Carr, P. and Shen, E. and Jennings, S. and Macuda, T. and Craig, G. and Hornsey, R.},\n\tbooktitle = {Helmet- and Head-Mounted Displays X: Technologies and Applications},\n\tdate-modified = {2012-07-02 22:24:47 -0400},\n\tdoi = {10.1117/12.602736},\n\teditor = {Rash, C. E.},\n\tkeywords = {Night Vision},\n\tpages = {21-31},\n\tpublisher = {SPIE-Int Soc Optical Engineering},\n\tseries = {Proceedings of the Society of Photo-Optical Instrumentation Engineers (SPIE)},\n\ttitle = {Physical modeling and characterization of the halo phenomenon in night vision goggles},\n\turl-1 = {http://dx.doi.org/10.1117/12.602736},\n\turl-2 = {http://dx.doi.org/10.1117/12.602736},\n\tvolume = {5800},\n\tyear = {2005},\n\turl-1 = {https://doi.org/10.1117/12.602736}}\n\n","author_short":["Thomas, P. J.","Allison, R.","Carr, P.","Shen, E.","Jennings, S.","Macuda, T.","Craig, G.","Hornsey, R."],"editor_short":["Rash, C. E."],"key":"allison200521-31","id":"allison200521-31","bibbaseid":"thomas-allison-carr-shen-jennings-macuda-craig-hornsey-physicalmodelingandcharacterizationofthehalophenomenoninnightvisiongoggles-2005","role":"author","urls":{"-1":"https://doi.org/10.1117/12.602736","-2":"http://dx.doi.org/10.1117/12.602736"},"keyword":["Night Vision"],"metadata":{"authorlinks":{"allison, r":"https://percept.eecs.yorku.ca/bibase%20pubs.shtml"}}},"bibtype":"inproceedings","biburl":"www.cse.yorku.ca/percept/papers/self.bib","downloads":0,"keywords":["night vision"],"search_terms":["physical","modeling","characterization","halo","phenomenon","night","vision","goggles","thomas","allison","carr","shen","jennings","macuda","craig","hornsey"],"title":"Physical modeling and characterization of the halo phenomenon in night vision goggles","title_words":["physical","modeling","characterization","halo","phenomenon","night","vision","goggles"],"year":2005,"dataSources":["kmmXSosvtyJQxBtzs","BPKPSXjrbMGteC59J"]}