var bibbase_data = {"data":"<img src=\"//bibbase.org/img/ajax-loader.gif\" id=\"spinner\"\n  style=\"display: none;\" alt=\"Loading..\" />\n\n<div id=\"bibbase\">\n\n  <script type=\"text/javascript\">\n    var bibbase = {\n      params: {\"bib\":\"https://owncloud.gwdg.de/index.php/s/fECyZmHesnTDg1n/download\",\"jsonp\":\"1\",\"host\":\"bibbase.org\"},\n      data: [{\"bibtype\":\"article\",\"type\":\"article\",\"title\":\"Monitoring of Beech Glued Laminated Timber and Delamination Resistance of Beech Finger-Joints in Varying Ambient Climates\",\"volume\":\"12\",\"copyright\":\"http://creativecommons.org/licenses/by/3.0/\",\"url\":\"https://www.mdpi.com/1999-4907/12/12/1672\",\"doi\":\"10.3390/f12121672\",\"abstract\":\"In this study, varying ambient climates were simulated in a test building by changing temperature and relative humidity. Beech glued laminated timber (glulam, Fagus sylvatica, L.) was freshly installed in the test building and monitoring of the change in wood moisture content of the glulam resulting from the variations in climate was carried out. Subsequently, finger-jointed beech specimens were exposed to the variations in relative humidity measured in the course of the monitoring experiment on a laboratory scale, and thus an alternating climate regime was derived from the conditions in the test building. Its influence on the delamination of the finger-joints was evaluated. In addition, it was examined whether beech finger-joints using commercial adhesive systems fulfil the normative requirements for delamination resistance according to EN 301 (2018) and whether different bonding-wood moisture levels have an effect on the delamination of the finger-joints. In the context of the monitoring experiment, there was a clear moisture gradient in the beech glulam between the inner and near-surface wood. The applied adhesive systems showed almost the same delamination resistance after variation of relative humidity. The normative requirements were met by all PRF-bonded and by most PUR-bonded beech finger-joints with higher bonding wood moisture content.\",\"language\":\"en\",\"number\":\"12\",\"urldate\":\"2022-01-17\",\"journal\":\"Forests\",\"author\":[{\"propositions\":[],\"lastnames\":[\"Stolze\"],\"firstnames\":[\"Hannes\"],\"suffixes\":[]},{\"propositions\":[],\"lastnames\":[\"Schuh\"],\"firstnames\":[\"Mathias\"],\"suffixes\":[]},{\"propositions\":[],\"lastnames\":[\"Kegel\"],\"firstnames\":[\"Sebastian\"],\"suffixes\":[]},{\"propositions\":[],\"lastnames\":[\"Fürkötter-Ziegenbein\"],\"firstnames\":[\"Connor\"],\"suffixes\":[]},{\"propositions\":[],\"lastnames\":[\"Brischke\"],\"firstnames\":[\"Christian\"],\"suffixes\":[]},{\"propositions\":[],\"lastnames\":[\"Militz\"],\"firstnames\":[\"Holger\"],\"suffixes\":[]}],\"month\":\"December\",\"year\":\"2021\",\"note\":\"Number: 12 Publisher: Multidisciplinary Digital Publishing Institute\",\"keywords\":\"adhesives, delamination, beech glulam, finger-joint bonding, monitoring experiment\",\"pages\":\"1672\",\"file\":\"Full Text PDF:C\\\\:\\\\\\\\Users\\\\\\\\maicher\\\\\\\\Zotero\\\\\\\\storage\\\\¶TR39CZS\\\\§tolze et al. - 2021 - Monitoring of Beech Glued Laminated Timber and Del.pdf:application/pdf;Snapshot:C\\\\:\\\\\\\\Users\\\\\\\\maicher\\\\\\\\Zotero\\\\\\\\storage\\\\\\\\8BNTBW9V\\\\\\\\1672.html:text/html\",\"bibtex\":\"@article{stolze_monitoring_2021,\\n\\ttitle = {Monitoring of {Beech} {Glued} {Laminated} {Timber} and {Delamination} {Resistance} of {Beech} {Finger}-{Joints} in {Varying} {Ambient} {Climates}},\\n\\tvolume = {12},\\n\\tcopyright = {http://creativecommons.org/licenses/by/3.0/},\\n\\turl = {https://www.mdpi.com/1999-4907/12/12/1672},\\n\\tdoi = {10.3390/f12121672},\\n\\tabstract = {In this study, varying ambient climates were simulated in a test building by changing temperature and relative humidity. Beech glued laminated timber (glulam, Fagus sylvatica, L.) was freshly installed in the test building and monitoring of the change in wood moisture content of the glulam resulting from the variations in climate was carried out. Subsequently, finger-jointed beech specimens were exposed to the variations in relative humidity measured in the course of the monitoring experiment on a laboratory scale, and thus an alternating climate regime was derived from the conditions in the test building. Its influence on the delamination of the finger-joints was evaluated. In addition, it was examined whether beech finger-joints using commercial adhesive systems fulfil the normative requirements for delamination resistance according to EN 301 (2018) and whether different bonding-wood moisture levels have an effect on the delamination of the finger-joints. In the context of the monitoring experiment, there was a clear moisture gradient in the beech glulam between the inner and near-surface wood. The applied adhesive systems showed almost the same delamination resistance after variation of relative humidity. The normative requirements were met by all PRF-bonded and by most PUR-bonded beech finger-joints with higher bonding wood moisture content.},\\n\\tlanguage = {en},\\n\\tnumber = {12},\\n\\turldate = {2022-01-17},\\n\\tjournal = {Forests},\\n\\tauthor = {Stolze, Hannes and Schuh, Mathias and Kegel, Sebastian and Fürkötter-Ziegenbein, Connor and Brischke, Christian and Militz, Holger},\\n\\tmonth = dec,\\n\\tyear = {2021},\\n\\tnote = {Number: 12\\nPublisher: Multidisciplinary Digital Publishing Institute},\\n\\tkeywords = {adhesives, delamination, beech glulam, finger-joint bonding, monitoring experiment},\\n\\tpages = {1672},\\n\\tfile = {Full Text PDF:C\\\\:\\\\\\\\Users\\\\\\\\maicher\\\\\\\\Zotero\\\\\\\\storage\\\\\\\\PTR39CZS\\\\\\\\Stolze et al. - 2021 - Monitoring of Beech Glued Laminated Timber and Del.pdf:application/pdf;Snapshot:C\\\\:\\\\\\\\Users\\\\\\\\maicher\\\\\\\\Zotero\\\\\\\\storage\\\\\\\\8BNTBW9V\\\\\\\\1672.html:text/html},\\n}\\n\\n\",\"author_short\":[\"Stolze, H.\",\"Schuh, M.\",\"Kegel, S.\",\"Fürkötter-Ziegenbein, C.\",\"Brischke, C.\",\"Militz, H.\"],\"key\":\"stolze_monitoring_2021\",\"id\":\"stolze_monitoring_2021\",\"bibbaseid\":\"stolze-schuh-kegel-frktterziegenbein-brischke-militz-monitoringofbeechgluedlaminatedtimberanddelaminationresistanceofbeechfingerjointsinvaryingambientclimates-2021\",\"role\":\"author\",\"urls\":{\"Paper\":\"https://www.mdpi.com/1999-4907/12/12/1672\"},\"keyword\":[\"adhesives\",\"delamination\",\"beech glulam\",\"finger-joint bonding\",\"monitoring experiment\"],\"metadata\":{\"authorlinks\":{\"stolze, h\":\"https://uni-goettingen.de/de/655065.html\"}},\"html\":\"\"},{\"bibtype\":\"article\",\"type\":\"article\",\"title\":\"Compatibility of preservative with adhesive in Eucalyptus grandis laminates\",\"volume\":\"13\",\"issn\":\"2042-6445\",\"url\":\"https://doi.org/10.1080/20426445.2021.2018101\",\"doi\":\"10.1080/20426445.2021.2018101\",\"abstract\":\"The fundamental factors responsible for the complexities in adhesive bonding of preservative-treated wood are predominantly wood species, preservative composition, and adhesive system. It is post-effect of these factors that process variables such as assembly times and bonding pressure exert secondary influences on adhesive-bond development in preservative-treated laminates. Hence, this study investigated the effect of copper azole (CA) and disodium octaborate tetrahydrate (DOT) impregnations on E. grandis heartwood (HW) and sapwood (SW) bonding with melamine–urea–formaldehyde and polyurethane adhesives. Based on the adhesives and bonding conditions investigated, the CA and DOT-treated E. grandis laminates do not satisfy at least one of the shear strength and delamination requirements according to EN 14080:2013. Contrary to delamination, shear strength was significantly affected by the HW–SW difference. This study established the basis for further considerations on adapting bonding conditions for improved adhesive-bond performance in CA and DOT-treated E. grandis laminates towards manufacturing durable hardwood composite for tropical and subtropical environments.\",\"number\":\"1\",\"urldate\":\"2021-12-23\",\"journal\":\"International Wood Products Journal\",\"author\":[{\"propositions\":[],\"lastnames\":[\"Alade\"],\"firstnames\":[\"Adefemi\",\"Adebisi\"],\"suffixes\":[]},{\"propositions\":[],\"lastnames\":[\"Naghizadeh\"],\"firstnames\":[\"Zahra\"],\"suffixes\":[]},{\"propositions\":[],\"lastnames\":[\"Wessels\"],\"firstnames\":[\"Coenraad\",\"Brand\"],\"suffixes\":[]},{\"propositions\":[],\"lastnames\":[\"Stolze\"],\"firstnames\":[\"Hannes\"],\"suffixes\":[]},{\"propositions\":[],\"lastnames\":[\"Militz\"],\"firstnames\":[\"Holger\"],\"suffixes\":[]}],\"month\":\"December\",\"year\":\"2021\",\"note\":\"Publisher: Taylor & Francis _eprint: https://doi.org/10.1080/20426445.2021.2018101\",\"keywords\":\"adhesion, wood composites, E. grandis, hardwood bonding, Wood durability treatment\",\"pages\":\"57–69\",\"file\":\"Alade et al. - 2021 - Compatibility of preservative with adhesive in Euc.pdf:C\\\\:\\\\\\\\Users\\\\\\\\maicher\\\\\\\\Zotero\\\\\\\\storage\\\\\\\\XFVIY46R\\\\\\\\Alade et al. - 2021 - Compatibility of preservative with adhesive in Euc.pdf:application/pdf\",\"bibtex\":\"@article{alade_compatibility_2021,\\n\\ttitle = {Compatibility of preservative with adhesive in {Eucalyptus} grandis laminates},\\n\\tvolume = {13},\\n\\tissn = {2042-6445},\\n\\turl = {https://doi.org/10.1080/20426445.2021.2018101},\\n\\tdoi = {10.1080/20426445.2021.2018101},\\n\\tabstract = {The fundamental factors responsible for the complexities in adhesive bonding of preservative-treated wood are predominantly wood species, preservative composition, and adhesive system. It is post-effect of these factors that process variables such as assembly times and bonding pressure exert secondary influences on adhesive-bond development in preservative-treated laminates. Hence, this study investigated the effect of copper azole (CA) and disodium octaborate tetrahydrate (DOT) impregnations on E. grandis heartwood (HW) and sapwood (SW) bonding with melamine–urea–formaldehyde and polyurethane adhesives. Based on the adhesives and bonding conditions investigated, the CA and DOT-treated E. grandis laminates do not satisfy at least one of the shear strength and delamination requirements according to EN 14080:2013. Contrary to delamination, shear strength was significantly affected by the HW–SW difference. This study established the basis for further considerations on adapting bonding conditions for improved adhesive-bond performance in CA and DOT-treated E. grandis laminates towards manufacturing durable hardwood composite for tropical and subtropical environments.},\\n\\tnumber = {1},\\n\\turldate = {2021-12-23},\\n\\tjournal = {International Wood Products Journal},\\n\\tauthor = {Alade, Adefemi Adebisi and Naghizadeh, Zahra and Wessels, Coenraad Brand and Stolze, Hannes and Militz, Holger},\\n\\tmonth = dec,\\n\\tyear = {2021},\\n\\tnote = {Publisher: Taylor \\\\& Francis\\n\\\\_eprint: https://doi.org/10.1080/20426445.2021.2018101},\\n\\tkeywords = {adhesion, wood composites, E. grandis, hardwood bonding, Wood durability treatment},\\n\\tpages = {57--69},\\n\\tfile = {Alade et al. - 2021 - Compatibility of preservative with adhesive in Euc.pdf:C\\\\:\\\\\\\\Users\\\\\\\\maicher\\\\\\\\Zotero\\\\\\\\storage\\\\\\\\XFVIY46R\\\\\\\\Alade et al. - 2021 - Compatibility of preservative with adhesive in Euc.pdf:application/pdf},\\n}\\n\\n\",\"author_short\":[\"Alade, A. A.\",\"Naghizadeh, Z.\",\"Wessels, C. B.\",\"Stolze, H.\",\"Militz, H.\"],\"key\":\"alade_compatibility_2021\",\"id\":\"alade_compatibility_2021\",\"bibbaseid\":\"alade-naghizadeh-wessels-stolze-militz-compatibilityofpreservativewithadhesiveineucalyptusgrandislaminates-2021\",\"role\":\"author\",\"urls\":{\"Paper\":\"https://doi.org/10.1080/20426445.2021.2018101\"},\"keyword\":[\"adhesion\",\"wood composites\",\"E. grandis\",\"hardwood bonding\",\"Wood durability treatment\"],\"metadata\":{\"authorlinks\":{\"stolze, h\":\"https://uni-goettingen.de/de/655065.html\"}},\"html\":\"\"},{\"bibtype\":\"article\",\"type\":\"article\",\"title\":\"Improved adhesive-bond performance in copper azole and disodium octaborate tetrahydrate-treated Eucalyptus grandis laminates\",\"volume\":\"0\",\"issn\":\"2042-6445\",\"url\":\"https://doi.org/10.1080/20426445.2022.2058277\",\"doi\":\"10.1080/20426445.2022.2058277\",\"abstract\":\"The prospect of manufacturing durable structural laminated wood with copper and boron-based preservative-impregnated Eucalyptus grandis wood was previously investigated but revealed adhesive-bond performance below standard requirements. In this study, bonding process factors, viz. mechanical pretreatment (surface planing) and bonding pressure in conjunction with wood preservative and adhesive compatibility for improved bond performance in preservative-treated E. grandis laminates were investigated. The results obtained showed significant and satisfactory improvement in shear strength and delamination resistance of E. grandis laminates based on EN 14080:2013 [Timber structures — Glued laminated timber and glued solid timber — Requirements, BSI Stand. Publ. (2014) 1–110] requirements. The suitability of polyurethane, melamine-urea-formaldehyde, and phenol-resorcinol-formaldehyde adhesives for bonding copper azole (CA) and disodium octaborate tetrahydrate (DOT)-impregnated E. grandis wood was established. Satisfactory pathways, including greener process routes for manufacturing CA and DOT-impregnated E. grandis laminates for structural applications in tropical and subtropical climes were achieved. The established processes could be readily adopted industrially to enhance the global implementation of solid wood composites and promote hardwood bonding.\",\"number\":\"0\",\"urldate\":\"2022-04-11\",\"journal\":\"International Wood Products Journal\",\"author\":[{\"propositions\":[],\"lastnames\":[\"Alade\"],\"firstnames\":[\"Adefemi\",\"Adebisi\"],\"suffixes\":[]},{\"propositions\":[],\"lastnames\":[\"Wessels\"],\"firstnames\":[\"Coenraad\",\"Brand\"],\"suffixes\":[]},{\"propositions\":[],\"lastnames\":[\"Stolze\"],\"firstnames\":[\"Hannes\"],\"suffixes\":[]},{\"propositions\":[],\"lastnames\":[\"Militz\"],\"firstnames\":[\"Holger\"],\"suffixes\":[]}],\"month\":\"April\",\"year\":\"2022\",\"note\":\"Publisher: Taylor & Francis _eprint: https://doi.org/10.1080/20426445.2022.2058277\",\"keywords\":\"adhesion, E. grandis, hardwood bonding, bond durability, bond quality, solid wood composites, water-borne preservatives, Wood preservation\",\"pages\":\"1–9\",\"bibtex\":\"@article{alade_improved_2022,\\n\\ttitle = {Improved adhesive-bond performance in copper azole and disodium octaborate tetrahydrate-treated {Eucalyptus} grandis laminates},\\n\\tvolume = {0},\\n\\tissn = {2042-6445},\\n\\turl = {https://doi.org/10.1080/20426445.2022.2058277},\\n\\tdoi = {10.1080/20426445.2022.2058277},\\n\\tabstract = {The prospect of manufacturing durable structural laminated wood with copper and boron-based preservative-impregnated Eucalyptus grandis wood was previously investigated but revealed adhesive-bond performance below standard requirements. In this study, bonding process factors, viz. mechanical pretreatment (surface planing) and bonding pressure in conjunction with wood preservative and adhesive compatibility for improved bond performance in preservative-treated E. grandis laminates were investigated. The results obtained showed significant and satisfactory improvement in shear strength and delamination resistance of E. grandis laminates based on EN 14080:2013 [Timber structures — Glued laminated timber and glued solid timber — Requirements, BSI Stand. Publ. (2014) 1–110] requirements. The suitability of polyurethane, melamine-urea-formaldehyde, and phenol-resorcinol-formaldehyde adhesives for bonding copper azole (CA) and disodium octaborate tetrahydrate (DOT)-impregnated E. grandis wood was established. Satisfactory pathways, including greener process routes for manufacturing CA and DOT-impregnated E. grandis laminates for structural applications in tropical and subtropical climes were achieved. The established processes could be readily adopted industrially to enhance the global implementation of solid wood composites and promote hardwood bonding.},\\n\\tnumber = {0},\\n\\turldate = {2022-04-11},\\n\\tjournal = {International Wood Products Journal},\\n\\tauthor = {Alade, Adefemi Adebisi and Wessels, Coenraad Brand and Stolze, Hannes and Militz, Holger},\\n\\tmonth = apr,\\n\\tyear = {2022},\\n\\tnote = {Publisher: Taylor \\\\& Francis\\n\\\\_eprint: https://doi.org/10.1080/20426445.2022.2058277},\\n\\tkeywords = {adhesion, E. grandis, hardwood bonding, bond durability, bond quality, solid wood composites, water-borne preservatives, Wood preservation},\\n\\tpages = {1--9},\\n}\\n\\n\",\"author_short\":[\"Alade, A. A.\",\"Wessels, C. B.\",\"Stolze, H.\",\"Militz, H.\"],\"key\":\"alade_improved_2022\",\"id\":\"alade_improved_2022\",\"bibbaseid\":\"alade-wessels-stolze-militz-improvedadhesivebondperformanceincopperazoleanddisodiumoctaboratetetrahydratetreatedeucalyptusgrandislaminates-2022\",\"role\":\"author\",\"urls\":{\"Paper\":\"https://doi.org/10.1080/20426445.2022.2058277\"},\"keyword\":[\"adhesion\",\"E. grandis\",\"hardwood bonding\",\"bond durability\",\"bond quality\",\"solid wood composites\",\"water-borne preservatives\",\"Wood preservation\"],\"metadata\":{\"authorlinks\":{\"stolze, h\":\"https://uni-goettingen.de/de/655065.html\"}},\"html\":\"\"},{\"bibtype\":\"article\",\"type\":\"article\",\"title\":\"Non-Destructive Evaluation of the Cutting Surface of Hardwood Finger Joints\",\"volume\":\"22\",\"copyright\":\"http://creativecommons.org/licenses/by/3.0/\",\"issn\":\"1424-8220\",\"url\":\"https://www.mdpi.com/1424-8220/22/10/3855\",\"doi\":\"10.3390/s22103855\",\"abstract\":\"In this study, the surface parameters wettability, roughness, and adhesive penetration, which are important for wood bonding, were investigated and evaluated utilizing non-destructive methods after different mechanical processing. For this purpose, beech and birch finger joints were prepared with different cutting combinations (three cutters with different sharpness levels and two feed rates) in an industrial process. Effects and interactions on the surface parameters resulting from the different cutting combinations were evaluated using three Full Factorial Designs. The various cutting parameters had a predominantly significant influence on the surface parameters. The effects and identified interactions highlight the complexity of the cutting surface and the importance of wood bonding. In this respect, a new finding is that with sharper cutters, higher contact angles of the adhesives occur. The methods (contact angle measurement, laser scanning microscopy, and brightfield microscopy) used were well suited to make effects visible and quantifiable, which can be of interest for the quality control of the wood processing industry. The results can help to better understand and evaluate the design of wood surfaces via machining and the bonding of hardwoods. Possibly the results can contribute to further standardizing the production of load-bearing hardwood finger joints and making them more efficient.\",\"language\":\"en\",\"number\":\"10\",\"urldate\":\"2022-05-19\",\"journal\":\"Sensors\",\"author\":[{\"propositions\":[],\"lastnames\":[\"Stolze\"],\"firstnames\":[\"Hannes\"],\"suffixes\":[]},{\"propositions\":[],\"lastnames\":[\"Gurnik\"],\"firstnames\":[\"Michael\"],\"suffixes\":[]},{\"propositions\":[],\"lastnames\":[\"Koddenberg\"],\"firstnames\":[\"Tim\"],\"suffixes\":[]},{\"propositions\":[],\"lastnames\":[\"Kröger\"],\"firstnames\":[\"Jonas\"],\"suffixes\":[]},{\"propositions\":[],\"lastnames\":[\"Köhler\"],\"firstnames\":[\"Robert\"],\"suffixes\":[]},{\"propositions\":[],\"lastnames\":[\"Viöl\"],\"firstnames\":[\"Wolfgang\"],\"suffixes\":[]},{\"propositions\":[],\"lastnames\":[\"Militz\"],\"firstnames\":[\"Holger\"],\"suffixes\":[]}],\"month\":\"January\",\"year\":\"2022\",\"note\":\"Number: 10 Publisher: Multidisciplinary Digital Publishing Institute\",\"keywords\":\"wettability, hardwood, roughness, non-destructive evaluation, adhesive penetration, cutting surface, finger-jointing, wood characterization\",\"pages\":\"3855\",\"file\":\"Full Text PDF:C\\\\:\\\\\\\\Users\\\\\\\\maicher\\\\\\\\Zotero\\\\\\\\storage\\\\4̋WWF56G\\\\§tolze et al. - 2022 - Non-Destructive Evaluation of the Cutting Surface .pdf:application/pdf;sensors-22-03855.pdf:C\\\\:\\\\\\\\Users\\\\\\\\maicher\\\\\\\\Zotero\\\\\\\\storage\\\\\\\\J6S2BUM3\\\\\\\\sensors-22-03855.pdf:application/pdf\",\"bibtex\":\"@article{stolze_non-destructive_2022,\\n\\ttitle = {Non-{Destructive} {Evaluation} of the {Cutting} {Surface} of {Hardwood} {Finger} {Joints}},\\n\\tvolume = {22},\\n\\tcopyright = {http://creativecommons.org/licenses/by/3.0/},\\n\\tissn = {1424-8220},\\n\\turl = {https://www.mdpi.com/1424-8220/22/10/3855},\\n\\tdoi = {10.3390/s22103855},\\n\\tabstract = {In this study, the surface parameters wettability, roughness, and adhesive penetration, which are important for wood bonding, were investigated and evaluated utilizing non-destructive methods after different mechanical processing. For this purpose, beech and birch finger joints were prepared with different cutting combinations (three cutters with different sharpness levels and two feed rates) in an industrial process. Effects and interactions on the surface parameters resulting from the different cutting combinations were evaluated using three Full Factorial Designs. The various cutting parameters had a predominantly significant influence on the surface parameters. The effects and identified interactions highlight the complexity of the cutting surface and the importance of wood bonding. In this respect, a new finding is that with sharper cutters, higher contact angles of the adhesives occur. The methods (contact angle measurement, laser scanning microscopy, and brightfield microscopy) used were well suited to make effects visible and quantifiable, which can be of interest for the quality control of the wood processing industry. The results can help to better understand and evaluate the design of wood surfaces via machining and the bonding of hardwoods. Possibly the results can contribute to further standardizing the production of load-bearing hardwood finger joints and making them more efficient.},\\n\\tlanguage = {en},\\n\\tnumber = {10},\\n\\turldate = {2022-05-19},\\n\\tjournal = {Sensors},\\n\\tauthor = {Stolze, Hannes and Gurnik, Michael and Koddenberg, Tim and Kröger, Jonas and Köhler, Robert and Viöl, Wolfgang and Militz, Holger},\\n\\tmonth = jan,\\n\\tyear = {2022},\\n\\tnote = {Number: 10\\nPublisher: Multidisciplinary Digital Publishing Institute},\\n\\tkeywords = {wettability, hardwood, roughness, non-destructive evaluation, adhesive penetration, cutting surface, finger-jointing, wood characterization},\\n\\tpages = {3855},\\n\\tfile = {Full Text PDF:C\\\\:\\\\\\\\Users\\\\\\\\maicher\\\\\\\\Zotero\\\\\\\\storage\\\\\\\\H4WWF56G\\\\\\\\Stolze et al. - 2022 - Non-Destructive Evaluation of the Cutting Surface .pdf:application/pdf;sensors-22-03855.pdf:C\\\\:\\\\\\\\Users\\\\\\\\maicher\\\\\\\\Zotero\\\\\\\\storage\\\\\\\\J6S2BUM3\\\\\\\\sensors-22-03855.pdf:application/pdf},\\n}\\n\\n\",\"author_short\":[\"Stolze, H.\",\"Gurnik, M.\",\"Koddenberg, T.\",\"Kröger, J.\",\"Köhler, R.\",\"Viöl, W.\",\"Militz, H.\"],\"key\":\"stolze_non-destructive_2022\",\"id\":\"stolze_non-destructive_2022\",\"bibbaseid\":\"stolze-gurnik-koddenberg-krger-khler-vil-militz-nondestructiveevaluationofthecuttingsurfaceofhardwoodfingerjoints-2022\",\"role\":\"author\",\"urls\":{\"Paper\":\"https://www.mdpi.com/1424-8220/22/10/3855\"},\"keyword\":[\"wettability\",\"hardwood\",\"roughness\",\"non-destructive evaluation\",\"adhesive penetration\",\"cutting surface\",\"finger-jointing\",\"wood characterization\"],\"metadata\":{\"authorlinks\":{\"stolze, h\":\"https://uni-goettingen.de/de/655065.html\"}},\"html\":\"\"},{\"bibtype\":\"article\",\"type\":\"article\",\"title\":\"Characterizing surface adhesion-related chemical properties of copper azole and disodium octaborate tetrahydrate-impregnated Eucalyptus grandis wood\",\"volume\":\"0\",\"issn\":\"0169-4243\",\"url\":\"https://doi.org/10.1080/01694243.2022.2125208\",\"doi\":\"10.1080/01694243.2022.2125208\",\"abstract\":\"In-depth knowledge of the interaction effects of wood and preservative chemicals on surface adhesion characteristics is crucial for developing pathways to improve the adhesive bonding of treated woods. Therefore, this study investigated fundamental changes in the surface adhesion-related chemical characteristics of E. grandis sapwood and heartwood impregnated with copper azole (CA) and disodium octaborate tetrahydrate (DOT) wood preservatives. The characterization techniques employed include scanning electron microscopy integrated with energy-dispersive X-ray spectroscopy and Fourier transformed infrared spectroscopy. The results obtained revealed that CA and DOT impregnations significantly altered the acidity and reduced the polar functional groups on E. grandis sapwood and heartwood surfaces. The effect was more pronounced with DOT impregnation and on the sapwood. The observed modifications signal that the CA- and DOT-treated wood adhesion could be inhibited due to reduced opportunity for chemical bonding between the treated wood and adhesive molecules. Furthermore, there is a high likelihood of the hindrance of adhesion via mechanical interlocking as a result of chemical deposits, particularly in copper azole-impregnated wood. Considering the observed changes in the surface chemical characteristics of the CA and DOT-impregnated E. grandis, adhesive compatibility and adapting bonding parameters, such as assembly time and bonding pressure could be vital in ensuring adequate bonding of the treated E. grandis wood.\",\"number\":\"0\",\"urldate\":\"2022-09-26\",\"journal\":\"Journal of Adhesion Science and Technology\",\"author\":[{\"propositions\":[],\"lastnames\":[\"Alade\"],\"firstnames\":[\"Adefemi\",\"Adebisi\"],\"suffixes\":[]},{\"propositions\":[],\"lastnames\":[\"Naghizadeh\"],\"firstnames\":[\"Zahra\"],\"suffixes\":[]},{\"propositions\":[],\"lastnames\":[\"Wessels\"],\"firstnames\":[\"Coenraad\",\"Brand\"],\"suffixes\":[]},{\"propositions\":[],\"lastnames\":[\"Stolze\"],\"firstnames\":[\"Hannes\"],\"suffixes\":[]},{\"propositions\":[],\"lastnames\":[\"Militz\"],\"firstnames\":[\"Holger\"],\"suffixes\":[]}],\"month\":\"September\",\"year\":\"2022\",\"note\":\"Publisher: Taylor & Francis _eprint: https://doi.org/10.1080/01694243.2022.2125208\",\"keywords\":\"adhesion, FTIR, Eucalyptus grandis, Wood preservation, SEM-EDS, surface modification\",\"pages\":\"1–24\",\"bibtex\":\"@article{alade_characterizing_2022,\\n\\ttitle = {Characterizing surface adhesion-related chemical properties of copper azole and disodium octaborate tetrahydrate-impregnated {Eucalyptus} grandis wood},\\n\\tvolume = {0},\\n\\tissn = {0169-4243},\\n\\turl = {https://doi.org/10.1080/01694243.2022.2125208},\\n\\tdoi = {10.1080/01694243.2022.2125208},\\n\\tabstract = {In-depth knowledge of the interaction effects of wood and preservative chemicals on surface adhesion characteristics is crucial for developing pathways to improve the adhesive bonding of treated woods. Therefore, this study investigated fundamental changes in the surface adhesion-related chemical characteristics of E. grandis sapwood and heartwood impregnated with copper azole (CA) and disodium octaborate tetrahydrate (DOT) wood preservatives. The characterization techniques employed include scanning electron microscopy integrated with energy-dispersive X-ray spectroscopy and Fourier transformed infrared spectroscopy. The results obtained revealed that CA and DOT impregnations significantly altered the acidity and reduced the polar functional groups on E. grandis sapwood and heartwood surfaces. The effect was more pronounced with DOT impregnation and on the sapwood. The observed modifications signal that the CA- and DOT-treated wood adhesion could be inhibited due to reduced opportunity for chemical bonding between the treated wood and adhesive molecules. Furthermore, there is a high likelihood of the hindrance of adhesion via mechanical interlocking as a result of chemical deposits, particularly in copper azole-impregnated wood. Considering the observed changes in the surface chemical characteristics of the CA and DOT-impregnated E. grandis, adhesive compatibility and adapting bonding parameters, such as assembly time and bonding pressure could be vital in ensuring adequate bonding of the treated E. grandis wood.},\\n\\tnumber = {0},\\n\\turldate = {2022-09-26},\\n\\tjournal = {Journal of Adhesion Science and Technology},\\n\\tauthor = {Alade, Adefemi Adebisi and Naghizadeh, Zahra and Wessels, Coenraad Brand and Stolze, Hannes and Militz, Holger},\\n\\tmonth = sep,\\n\\tyear = {2022},\\n\\tnote = {Publisher: Taylor \\\\& Francis\\n\\\\_eprint: https://doi.org/10.1080/01694243.2022.2125208},\\n\\tkeywords = {adhesion, FTIR, Eucalyptus grandis, Wood preservation, SEM-EDS, surface modification},\\n\\tpages = {1--24},\\n}\\n\\n\",\"author_short\":[\"Alade, A. A.\",\"Naghizadeh, Z.\",\"Wessels, C. B.\",\"Stolze, H.\",\"Militz, H.\"],\"key\":\"alade_characterizing_2022\",\"id\":\"alade_characterizing_2022\",\"bibbaseid\":\"alade-naghizadeh-wessels-stolze-militz-characterizingsurfaceadhesionrelatedchemicalpropertiesofcopperazoleanddisodiumoctaboratetetrahydrateimpregnatedeucalyptusgrandiswood-2022\",\"role\":\"author\",\"urls\":{\"Paper\":\"https://doi.org/10.1080/01694243.2022.2125208\"},\"keyword\":[\"adhesion\",\"FTIR\",\"Eucalyptus grandis\",\"Wood preservation\",\"SEM-EDS\",\"surface modification\"],\"metadata\":{\"authorlinks\":{\"stolze, h\":\"https://uni-goettingen.de/de/655065.html\"}},\"html\":\"\"},{\"bibtype\":\"inproceedings\",\"type\":\"inproceedings\",\"address\":\"Sopron, Hungary\",\"title\":\"Self-locking of finger joints - Influence of density and moisture content\",\"isbn\":\"978-963-334-446-0\",\"language\":\"EN\",\"booktitle\":\"Hardwood Conference Proceedings\",\"publisher\":\"University of Sopron Press\",\"author\":[{\"propositions\":[],\"lastnames\":[\"Stolze\"],\"firstnames\":[\"Hannes\"],\"suffixes\":[]},{\"propositions\":[],\"lastnames\":[\"Trautwein\"],\"firstnames\":[\"Jan-Frederik\"],\"suffixes\":[]},{\"propositions\":[],\"lastnames\":[\"Mayer\"],\"firstnames\":[\"Aaron\",\"Kilan\"],\"suffixes\":[]},{\"propositions\":[],\"lastnames\":[\"Theis\"],\"firstnames\":[\"Viorica\"],\"suffixes\":[]},{\"propositions\":[],\"lastnames\":[\"Bollmus\"],\"firstnames\":[\"Susanne\"],\"suffixes\":[]},{\"propositions\":[],\"lastnames\":[\"Militz\"],\"firstnames\":[\"Holger\"],\"suffixes\":[]}],\"year\":\"2022\",\"pages\":\"317–323\",\"bibtex\":\"@inproceedings{stolze_self-locking_2022,\\n\\taddress = {Sopron, Hungary},\\n\\ttitle = {Self-locking of finger joints - {Influence} of density and moisture content},\\n\\tisbn = {978-963-334-446-0},\\n\\tlanguage = {EN},\\n\\tbooktitle = {Hardwood {Conference} {Proceedings}},\\n\\tpublisher = {University of Sopron Press},\\n\\tauthor = {Stolze, Hannes and Trautwein, Jan-Frederik and Mayer, Aaron Kilan and Theis, Viorica and Bollmus, Susanne and Militz, Holger},\\n\\tyear = {2022},\\n\\tpages = {317--323},\\n}\\n\\n\",\"author_short\":[\"Stolze, H.\",\"Trautwein, J.\",\"Mayer, A. K.\",\"Theis, V.\",\"Bollmus, S.\",\"Militz, H.\"],\"key\":\"stolze_self-locking_2022\",\"id\":\"stolze_self-locking_2022\",\"bibbaseid\":\"stolze-trautwein-mayer-theis-bollmus-militz-selflockingoffingerjointsinfluenceofdensityandmoisturecontent-2022\",\"role\":\"author\",\"urls\":{},\"metadata\":{\"authorlinks\":{\"stolze, h\":\"https://uni-goettingen.de/de/655065.html\"}},\"html\":\"\"},{\"bibtype\":\"article\",\"type\":\"article\",\"title\":\"Determination of the Bonding Strength of Finger Joints Using a New Test Specimen Geometry\",\"volume\":\"0\",\"abstract\":\"In this study, a specimen geometry for testing finger joints was developed using finite element simulation and proofed by experimental testing. Six different wood species and three adhesives were used for finger-jointing specimens. With the test specimen geometry, the bonding strength of the finger joints was determined without the usual self-locking of the joint. Under load, the test specimen geometry introduces maximum stress at the beginning of the bond line (adhesive zone). However, the test specimen geometry does not generate a symmetric stress state. The main difficulty here is the flank angle of the finger joint geometry. The wood species and adhesives significantly influenced the performance of the finger joints.\",\"language\":\"en\",\"number\":\"0\",\"journal\":\"Process\",\"author\":[{\"propositions\":[],\"lastnames\":[\"Stolze\"],\"firstnames\":[\"Hannes\"],\"suffixes\":[]},{\"propositions\":[],\"lastnames\":[\"Gurnik\"],\"firstnames\":[\"Michael\"],\"suffixes\":[]},{\"propositions\":[],\"lastnames\":[\"Kegel\"],\"firstnames\":[\"Sebastian\"],\"suffixes\":[]},{\"propositions\":[],\"lastnames\":[\"Bollmus\"],\"firstnames\":[\"Susanne\"],\"suffixes\":[]},{\"propositions\":[],\"lastnames\":[\"Militz\"],\"firstnames\":[\"Holger\"],\"suffixes\":[]}],\"year\":\"2023\",\"file\":\"Stolze et al. - 2023 - Determination of the Bonding Strength of Finger Jo.pdf:C\\\\:\\\\\\\\Users\\\\\\\\maicher\\\\\\\\Zotero\\\\\\\\storage\\\\§RKKQCZA\\\\§tolze et al. - 2023 - Determination of the Bonding Strength of Finger Jo.pdf:application/pdf\",\"bibtex\":\"@article{stolze_determination_2023,\\n\\ttitle = {Determination of the {Bonding} {Strength} of {Finger} {Joints} {Using} a {New} {Test} {Specimen} {Geometry}},\\n\\tvolume = {0},\\n\\tabstract = {In this study, a specimen geometry for testing finger joints was developed using finite element simulation and proofed by experimental testing. Six different wood species and three adhesives were used for finger-jointing specimens. With the test specimen geometry, the bonding strength of the finger joints was determined without the usual self-locking of the joint. Under load, the test specimen geometry introduces maximum stress at the beginning of the bond line (adhesive zone). However, the test specimen geometry does not generate a symmetric stress state. The main difficulty here is the flank angle of the finger joint geometry. The wood species and adhesives significantly influenced the performance of the finger joints.},\\n\\tlanguage = {en},\\n\\tnumber = {0},\\n\\tjournal = {Process},\\n\\tauthor = {Stolze, Hannes and Gurnik, Michael and Kegel, Sebastian and Bollmus, Susanne and Militz, Holger},\\n\\tyear = {2023},\\n\\tfile = {Stolze et al. - 2023 - Determination of the Bonding Strength of Finger Jo.pdf:C\\\\:\\\\\\\\Users\\\\\\\\maicher\\\\\\\\Zotero\\\\\\\\storage\\\\\\\\SRKKQCZA\\\\\\\\Stolze et al. - 2023 - Determination of the Bonding Strength of Finger Jo.pdf:application/pdf},\\n}\\n\\n\",\"author_short\":[\"Stolze, H.\",\"Gurnik, M.\",\"Kegel, S.\",\"Bollmus, S.\",\"Militz, H.\"],\"key\":\"stolze_determination_2023\",\"id\":\"stolze_determination_2023\",\"bibbaseid\":\"stolze-gurnik-kegel-bollmus-militz-determinationofthebondingstrengthoffingerjointsusinganewtestspecimengeometry-2023\",\"role\":\"author\",\"urls\":{},\"metadata\":{\"authorlinks\":{\"stolze, h\":\"https://uni-goettingen.de/de/655065.html\"}},\"html\":\"\"},{\"bibtype\":\"techreport\",\"type\":\"Bachelorarbeit\",\"address\":\"Göttingen\",\"title\":\"Spezifische Sortierung von Prüfkörpern aus Buchen- und Kiefernsplintholz nach Kriterien zur Prüfung von elasto-mechanischen Eigenschaften - Specific sorting of beech and pine sapwood according to the criteria for testing the elasto-mechanical characteristics\",\"language\":\"deutsch\",\"institution\":\"Georg-August-Universität Göttingen, Fakultät für Forstwissenschaften und Waldökologie, Abteilung Holzbiologie und Holzprodukte\",\"author\":[{\"propositions\":[],\"lastnames\":[\"Stolze\"],\"firstnames\":[\"Hannes\"],\"suffixes\":[]}],\"year\":\"2016\",\"note\":\"1. Prüfer: Dr. Antje Gellerich 2. Prüfer: Prof. Dr. Holger Militz\",\"bibtex\":\"@techreport{stolze_spezifische_2016,\\n\\taddress = {Göttingen},\\n\\ttype = {Bachelorarbeit},\\n\\ttitle = {Spezifische {Sortierung} von {Prüfkörpern} aus {Buchen}- und {Kiefernsplintholz} nach {Kriterien} zur {Prüfung} von elasto-mechanischen {Eigenschaften} - {Specific} sorting of beech and pine sapwood according to the criteria for testing the elasto-mechanical characteristics},\\n\\tlanguage = {deutsch},\\n\\tinstitution = {Georg-August-Universität Göttingen, Fakultät für Forstwissenschaften und Waldökologie, Abteilung Holzbiologie und Holzprodukte},\\n\\tauthor = {Stolze, Hannes},\\n\\tyear = {2016},\\n\\tnote = {1. Prüfer: Dr. Antje Gellerich\\n2. Prüfer: Prof. Dr. Holger Militz},\\n}\\n\",\"author_short\":[\"Stolze, H.\"],\"key\":\"stolze_spezifische_2016\",\"id\":\"stolze_spezifische_2016\",\"bibbaseid\":\"stolze-spezifischesortierungvonprfkrpernausbuchenundkiefernsplintholznachkriterienzurprfungvonelastomechanischeneigenschaftenspecificsortingofbeechandpinesapwoodaccordingtothecriteriafortestingtheelastomechanicalcharacteristics-2016\",\"role\":\"author\",\"urls\":{},\"metadata\":{\"authorlinks\":{\"stolze, h\":\"https://uni-goettingen.de/de/655065.html\"}},\"html\":\"\"}],\n      metadata: {\"owner\":\"stolze, h\",\"authorlinks\":{\"stolze, h\":\"https://uni-goettingen.de/de/655065.html\"}},\n      ownerID: \"KDqeY77dkX3fetTWA\"\n    };\n  </script>\n\n  <script type=\"text/javascript\">\n  var site$;\n  if (typeof $ != 'undefined') {\n    console.log('existing jquery: storing and then restoring');\n    site$ = $;\n    $ = null;\n  }\n  </script>\n\n  <script src=\"https://ajax.googleapis.com/ajax/libs/jquery/2.2.4/jquery.min.js\">\n  </script>\n  <script type=\"text/javascript\">\n  if (site$) {\n    console.log('existing jquery: avoiding conflict and restoring');\n    bb$ = $.noConflict(true);\n    $ = site$;\n  } else {\n    bb$ = $;\n  }\n  </script>\n\n  <script src=\"//bibbase.org/js/bibbase.min.js\"\n          type=\"text/javascript\">\n  </script>\n\n  <script type=\"text/javascript\"\n          src=\"https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.1/MathJax.js?config=TeX-AMS-MML_HTMLorMML\">\n  </script>\n  <script type=\"text/x-mathjax-config\">\n    MathJax.Hub.Config({tex2jax: {inlineMath: [['$','$'], ['\\\\(','\\\\)']]},\n                        skipTags: [\"body\"],\n                        processClass: \"bibbase_paper\"});\n  </script>\n\n  <style>\n  @media print {\n    .dontprint {\n        display: none !important;\n    }\n\n  .bibbase_group {\n    background-color: #E0E0E0;\n    font-style: italic;\n    font-size: larger;\n    text-shadow: 0px 0px 3px #FFFFFF;\n    border-radius: 4px 4px 4px 4px;\n    -moz-border-radius: 4px 4px 4px 4px;\n    -webkit-border-radius: 4px;\n    padding: 5px 40px 5px;\n    margin-top: 10px;\n    margin-bottom: 5px;\n    cursor: pointer;\n  }\n\n  .bibbase_paper {\n    margin-bottom: 5px;\n  }\n\n  }\n  </style>\n\n  \n  <div style=\"float: right; margin-right: 10px; margin-top: 10px; text-align: right; font-size: 12px\">\n    generated by\n    <a href=\"//bibbase.org\"\n       onclick=\"trackOutboundLink('bibbase', 'logo clicked', window.location.href, '//bibbase.org'); return false;\">\n      <img src=\"//bibbase.org/img/logo.svg\"\n           style=\"vertical-align: middle; margin-left: 3px; height: 16px;\"/\n           alt=\"bibbase.org\"\n           title=\"BibBase – The easiest way to maintain your publications page.\"\n        ></a>\n    \n  </div>\n  \n\n  <div id=\"bibbase_header\" class=\"dontprint\" style=\"\">\n\n    <ul class=\"nav nav-pills\" style=\"margin: 0px;\">\n\n      <li class=\"dropdown\" id=\"groupby_dropdown\">\n      <a class=\"dropdown-toggle\"\n         data-toggle=\"dropdown\"\n         href=\"#\">\n          Group by\n          <b class=\"caret\"></b>\n      </a>\n      <ul class=\"dropdown-menu\">\n        <li class=\"groupby year\"><a onclick=\"groupby('year')\">\n            Year</a>\n        </li>\n        <li class=\"groupby author\"><a onclick=\"groupby('author_short')\">\n            Author</a>\n        </li>\n        <li class=\"groupby type\"><a onclick=\"groupby('type')\">\n            Type</a>\n        </li>\n        <li class=\"groupby keyword\"><a onclick=\"groupby('keyword')\">\n            Keyword</a>\n        </li>\n        <li class=\"groupby downloads\"><a onclick=\"groupby('downloads')\">\n            Downloads</a>\n        </li>\n      </ul>\n      </li>\n\n\n      <li class=\"dropdown\" id=\"menu_dropdown\">\n      <a class=\"dropdown-toggle\"\n         data-toggle=\"dropdown\"\n         href=\"#\" alt=\"controls\">\n          <i class=\"fa fa-reorder\" alt=\"controls\"></i>\n          <b class=\"caret\"></b>\n      </a>\n      <ul class=\"dropdown-menu\">\n        <li>\n          <a onclick=\"toggleAll()\">\n            <i class=\"fa fa-chevron-down fa-fw\"></i> Expand/Collapse All\n          </a>\n        </li>\n        <li>\n          <a download=\"download\" href=\"data:text/bibtex;base64,QGFydGljbGV7c3RvbHplX21vbml0b3JpbmdfMjAyMSwKCXRpdGxlID0ge01vbml0b3Jpbmcgb2Yge0JlZWNofSB7R2x1ZWR9IHtMYW1pbmF0ZWR9IHtUaW1iZXJ9IGFuZCB7RGVsYW1pbmF0aW9ufSB7UmVzaXN0YW5jZX0gb2Yge0JlZWNofSB7RmluZ2VyfS17Sm9pbnRzfSBpbiB7VmFyeWluZ30ge0FtYmllbnR9IHtDbGltYXRlc319LAoJdm9sdW1lID0gezEyfSwKCWNvcHlyaWdodCA9IHtodHRwOi8vY3JlYXRpdmVjb21tb25zLm9yZy9saWNlbnNlcy9ieS8zLjAvfSwKCXVybCA9IHtodHRwczovL3d3dy5tZHBpLmNvbS8xOTk5LTQ5MDcvMTIvMTIvMTY3Mn0sCglkb2kgPSB7MTAuMzM5MC9mMTIxMjE2NzJ9LAoJYWJzdHJhY3QgPSB7SW4gdGhpcyBzdHVkeSwgdmFyeWluZyBhbWJpZW50IGNsaW1hdGVzIHdlcmUgc2ltdWxhdGVkIGluIGEgdGVzdCBidWlsZGluZyBieSBjaGFuZ2luZyB0ZW1wZXJhdHVyZSBhbmQgcmVsYXRpdmUgaHVtaWRpdHkuIEJlZWNoIGdsdWVkIGxhbWluYXRlZCB0aW1iZXIgKGdsdWxhbSwgRmFndXMgc3lsdmF0aWNhLCBMLikgd2FzIGZyZXNobHkgaW5zdGFsbGVkIGluIHRoZSB0ZXN0IGJ1aWxkaW5nIGFuZCBtb25pdG9yaW5nIG9mIHRoZSBjaGFuZ2UgaW4gd29vZCBtb2lzdHVyZSBjb250ZW50IG9mIHRoZSBnbHVsYW0gcmVzdWx0aW5nIGZyb20gdGhlIHZhcmlhdGlvbnMgaW4gY2xpbWF0ZSB3YXMgY2FycmllZCBvdXQuIFN1YnNlcXVlbnRseSwgZmluZ2VyLWpvaW50ZWQgYmVlY2ggc3BlY2ltZW5zIHdlcmUgZXhwb3NlZCB0byB0aGUgdmFyaWF0aW9ucyBpbiByZWxhdGl2ZSBodW1pZGl0eSBtZWFzdXJlZCBpbiB0aGUgY291cnNlIG9mIHRoZSBtb25pdG9yaW5nIGV4cGVyaW1lbnQgb24gYSBsYWJvcmF0b3J5IHNjYWxlLCBhbmQgdGh1cyBhbiBhbHRlcm5hdGluZyBjbGltYXRlIHJlZ2ltZSB3YXMgZGVyaXZlZCBmcm9tIHRoZSBjb25kaXRpb25zIGluIHRoZSB0ZXN0IGJ1aWxkaW5nLiBJdHMgaW5mbHVlbmNlIG9uIHRoZSBkZWxhbWluYXRpb24gb2YgdGhlIGZpbmdlci1qb2ludHMgd2FzIGV2YWx1YXRlZC4gSW4gYWRkaXRpb24sIGl0IHdhcyBleGFtaW5lZCB3aGV0aGVyIGJlZWNoIGZpbmdlci1qb2ludHMgdXNpbmcgY29tbWVyY2lhbCBhZGhlc2l2ZSBzeXN0ZW1zIGZ1bGZpbCB0aGUgbm9ybWF0aXZlIHJlcXVpcmVtZW50cyBmb3IgZGVsYW1pbmF0aW9uIHJlc2lzdGFuY2UgYWNjb3JkaW5nIHRvIEVOIDMwMSAoMjAxOCkgYW5kIHdoZXRoZXIgZGlmZmVyZW50IGJvbmRpbmctd29vZCBtb2lzdHVyZSBsZXZlbHMgaGF2ZSBhbiBlZmZlY3Qgb24gdGhlIGRlbGFtaW5hdGlvbiBvZiB0aGUgZmluZ2VyLWpvaW50cy4gSW4gdGhlIGNvbnRleHQgb2YgdGhlIG1vbml0b3JpbmcgZXhwZXJpbWVudCwgdGhlcmUgd2FzIGEgY2xlYXIgbW9pc3R1cmUgZ3JhZGllbnQgaW4gdGhlIGJlZWNoIGdsdWxhbSBiZXR3ZWVuIHRoZSBpbm5lciBhbmQgbmVhci1zdXJmYWNlIHdvb2QuIFRoZSBhcHBsaWVkIGFkaGVzaXZlIHN5c3RlbXMgc2hvd2VkIGFsbW9zdCB0aGUgc2FtZSBkZWxhbWluYXRpb24gcmVzaXN0YW5jZSBhZnRlciB2YXJpYXRpb24gb2YgcmVsYXRpdmUgaHVtaWRpdHkuIFRoZSBub3JtYXRpdmUgcmVxdWlyZW1lbnRzIHdlcmUgbWV0IGJ5IGFsbCBQUkYtYm9uZGVkIGFuZCBieSBtb3N0IFBVUi1ib25kZWQgYmVlY2ggZmluZ2VyLWpvaW50cyB3aXRoIGhpZ2hlciBib25kaW5nIHdvb2QgbW9pc3R1cmUgY29udGVudC59LAoJbGFuZ3VhZ2UgPSB7ZW59LAoJbnVtYmVyID0gezEyfSwKCXVybGRhdGUgPSB7MjAyMi0wMS0xN30sCglqb3VybmFsID0ge0ZvcmVzdHN9LAoJYXV0aG9yID0ge1N0b2x6ZSwgSGFubmVzIGFuZCBTY2h1aCwgTWF0aGlhcyBhbmQgS2VnZWwsIFNlYmFzdGlhbiBhbmQgRsO8cmvDtnR0ZXItWmllZ2VuYmVpbiwgQ29ubm9yIGFuZCBCcmlzY2hrZSwgQ2hyaXN0aWFuIGFuZCBNaWxpdHosIEhvbGdlcn0sCgltb250aCA9IGRlYywKCXllYXIgPSB7MjAyMX0sCglub3RlID0ge051bWJlcjogMTIKUHVibGlzaGVyOiBNdWx0aWRpc2NpcGxpbmFyeSBEaWdpdGFsIFB1Ymxpc2hpbmcgSW5zdGl0dXRlfSwKCWtleXdvcmRzID0ge2FkaGVzaXZlcywgZGVsYW1pbmF0aW9uLCBiZWVjaCBnbHVsYW0sIGZpbmdlci1qb2ludCBib25kaW5nLCBtb25pdG9yaW5nIGV4cGVyaW1lbnR9LAoJcGFnZXMgPSB7MTY3Mn0sCglmaWxlID0ge0Z1bGwgVGV4dCBQREY6Q1w6XFxVc2Vyc1xcbWFpY2hlclxcWm90ZXJvXFxzdG9yYWdlXFxQVFIzOUNaU1xcU3RvbHplIGV0IGFsLiAtIDIwMjEgLSBNb25pdG9yaW5nIG9mIEJlZWNoIEdsdWVkIExhbWluYXRlZCBUaW1iZXIgYW5kIERlbC5wZGY6YXBwbGljYXRpb24vcGRmO1NuYXBzaG90OkNcOlxcVXNlcnNcXG1haWNoZXJcXFpvdGVyb1xcc3RvcmFnZVxcOEJOVEJXOVZcXDE2NzIuaHRtbDp0ZXh0L2h0bWx9LAp9CgoKCkBhcnRpY2xle2FsYWRlX2NvbXBhdGliaWxpdHlfMjAyMSwKCXRpdGxlID0ge0NvbXBhdGliaWxpdHkgb2YgcHJlc2VydmF0aXZlIHdpdGggYWRoZXNpdmUgaW4ge0V1Y2FseXB0dXN9IGdyYW5kaXMgbGFtaW5hdGVzfSwKCXZvbHVtZSA9IHsxM30sCglpc3NuID0gezIwNDItNjQ0NX0sCgl1cmwgPSB7aHR0cHM6Ly9kb2kub3JnLzEwLjEwODAvMjA0MjY0NDUuMjAyMS4yMDE4MTAxfSwKCWRvaSA9IHsxMC4xMDgwLzIwNDI2NDQ1LjIwMjEuMjAxODEwMX0sCglhYnN0cmFjdCA9IHtUaGUgZnVuZGFtZW50YWwgZmFjdG9ycyByZXNwb25zaWJsZSBmb3IgdGhlIGNvbXBsZXhpdGllcyBpbiBhZGhlc2l2ZSBib25kaW5nIG9mIHByZXNlcnZhdGl2ZS10cmVhdGVkIHdvb2QgYXJlIHByZWRvbWluYW50bHkgd29vZCBzcGVjaWVzLCBwcmVzZXJ2YXRpdmUgY29tcG9zaXRpb24sIGFuZCBhZGhlc2l2ZSBzeXN0ZW0uIEl0IGlzIHBvc3QtZWZmZWN0IG9mIHRoZXNlIGZhY3RvcnMgdGhhdCBwcm9jZXNzIHZhcmlhYmxlcyBzdWNoIGFzIGFzc2VtYmx5IHRpbWVzIGFuZCBib25kaW5nIHByZXNzdXJlIGV4ZXJ0IHNlY29uZGFyeSBpbmZsdWVuY2VzIG9uIGFkaGVzaXZlLWJvbmQgZGV2ZWxvcG1lbnQgaW4gcHJlc2VydmF0aXZlLXRyZWF0ZWQgbGFtaW5hdGVzLiBIZW5jZSwgdGhpcyBzdHVkeSBpbnZlc3RpZ2F0ZWQgdGhlIGVmZmVjdCBvZiBjb3BwZXIgYXpvbGUgKENBKSBhbmQgZGlzb2RpdW0gb2N0YWJvcmF0ZSB0ZXRyYWh5ZHJhdGUgKERPVCkgaW1wcmVnbmF0aW9ucyBvbiBFLiBncmFuZGlzIGhlYXJ0d29vZCAoSFcpIGFuZCBzYXB3b29kIChTVykgYm9uZGluZyB3aXRoIG1lbGFtaW5l4oCTdXJlYeKAk2Zvcm1hbGRlaHlkZSBhbmQgcG9seXVyZXRoYW5lIGFkaGVzaXZlcy4gQmFzZWQgb24gdGhlIGFkaGVzaXZlcyBhbmQgYm9uZGluZyBjb25kaXRpb25zIGludmVzdGlnYXRlZCwgdGhlIENBIGFuZCBET1QtdHJlYXRlZCBFLiBncmFuZGlzIGxhbWluYXRlcyBkbyBub3Qgc2F0aXNmeSBhdCBsZWFzdCBvbmUgb2YgdGhlIHNoZWFyIHN0cmVuZ3RoIGFuZCBkZWxhbWluYXRpb24gcmVxdWlyZW1lbnRzIGFjY29yZGluZyB0byBFTiAxNDA4MDoyMDEzLiBDb250cmFyeSB0byBkZWxhbWluYXRpb24sIHNoZWFyIHN0cmVuZ3RoIHdhcyBzaWduaWZpY2FudGx5IGFmZmVjdGVkIGJ5IHRoZSBIV+KAk1NXIGRpZmZlcmVuY2UuIFRoaXMgc3R1ZHkgZXN0YWJsaXNoZWQgdGhlIGJhc2lzIGZvciBmdXJ0aGVyIGNvbnNpZGVyYXRpb25zIG9uIGFkYXB0aW5nIGJvbmRpbmcgY29uZGl0aW9ucyBmb3IgaW1wcm92ZWQgYWRoZXNpdmUtYm9uZCBwZXJmb3JtYW5jZSBpbiBDQSBhbmQgRE9ULXRyZWF0ZWQgRS4gZ3JhbmRpcyBsYW1pbmF0ZXMgdG93YXJkcyBtYW51ZmFjdHVyaW5nIGR1cmFibGUgaGFyZHdvb2QgY29tcG9zaXRlIGZvciB0cm9waWNhbCBhbmQgc3VidHJvcGljYWwgZW52aXJvbm1lbnRzLn0sCgludW1iZXIgPSB7MX0sCgl1cmxkYXRlID0gezIwMjEtMTItMjN9LAoJam91cm5hbCA9IHtJbnRlcm5hdGlvbmFsIFdvb2QgUHJvZHVjdHMgSm91cm5hbH0sCglhdXRob3IgPSB7QWxhZGUsIEFkZWZlbWkgQWRlYmlzaSBhbmQgTmFnaGl6YWRlaCwgWmFocmEgYW5kIFdlc3NlbHMsIENvZW5yYWFkIEJyYW5kIGFuZCBTdG9semUsIEhhbm5lcyBhbmQgTWlsaXR6LCBIb2xnZXJ9LAoJbW9udGggPSBkZWMsCgl5ZWFyID0gezIwMjF9LAoJbm90ZSA9IHtQdWJsaXNoZXI6IFRheWxvciBcJiBGcmFuY2lzClxfZXByaW50OiBodHRwczovL2RvaS5vcmcvMTAuMTA4MC8yMDQyNjQ0NS4yMDIxLjIwMTgxMDF9LAoJa2V5d29yZHMgPSB7YWRoZXNpb24sIHdvb2QgY29tcG9zaXRlcywgRS4gZ3JhbmRpcywgaGFyZHdvb2QgYm9uZGluZywgV29vZCBkdXJhYmlsaXR5IHRyZWF0bWVudH0sCglwYWdlcyA9IHs1Ny0tNjl9LAoJZmlsZSA9IHtBbGFkZSBldCBhbC4gLSAyMDIxIC0gQ29tcGF0aWJpbGl0eSBvZiBwcmVzZXJ2YXRpdmUgd2l0aCBhZGhlc2l2ZSBpbiBFdWMucGRmOkNcOlxcVXNlcnNcXG1haWNoZXJcXFpvdGVyb1xcc3RvcmFnZVxcWEZWSVk0NlJcXEFsYWRlIGV0IGFsLiAtIDIwMjEgLSBDb21wYXRpYmlsaXR5IG9mIHByZXNlcnZhdGl2ZSB3aXRoIGFkaGVzaXZlIGluIEV1Yy5wZGY6YXBwbGljYXRpb24vcGRmfSwKfQoKCgpAYXJ0aWNsZXthbGFkZV9pbXByb3ZlZF8yMDIyLAoJdGl0bGUgPSB7SW1wcm92ZWQgYWRoZXNpdmUtYm9uZCBwZXJmb3JtYW5jZSBpbiBjb3BwZXIgYXpvbGUgYW5kIGRpc29kaXVtIG9jdGFib3JhdGUgdGV0cmFoeWRyYXRlLXRyZWF0ZWQge0V1Y2FseXB0dXN9IGdyYW5kaXMgbGFtaW5hdGVzfSwKCXZvbHVtZSA9IHswfSwKCWlzc24gPSB7MjA0Mi02NDQ1fSwKCXVybCA9IHtodHRwczovL2RvaS5vcmcvMTAuMTA4MC8yMDQyNjQ0NS4yMDIyLjIwNTgyNzd9LAoJZG9pID0gezEwLjEwODAvMjA0MjY0NDUuMjAyMi4yMDU4Mjc3fSwKCWFic3RyYWN0ID0ge1RoZSBwcm9zcGVjdCBvZiBtYW51ZmFjdHVyaW5nIGR1cmFibGUgc3RydWN0dXJhbCBsYW1pbmF0ZWQgd29vZCB3aXRoIGNvcHBlciBhbmQgYm9yb24tYmFzZWQgcHJlc2VydmF0aXZlLWltcHJlZ25hdGVkIEV1Y2FseXB0dXMgZ3JhbmRpcyB3b29kIHdhcyBwcmV2aW91c2x5IGludmVzdGlnYXRlZCBidXQgcmV2ZWFsZWQgYWRoZXNpdmUtYm9uZCBwZXJmb3JtYW5jZSBiZWxvdyBzdGFuZGFyZCByZXF1aXJlbWVudHMuIEluIHRoaXMgc3R1ZHksIGJvbmRpbmcgcHJvY2VzcyBmYWN0b3JzLCB2aXouIG1lY2hhbmljYWwgcHJldHJlYXRtZW50IChzdXJmYWNlIHBsYW5pbmcpIGFuZCBib25kaW5nIHByZXNzdXJlIGluIGNvbmp1bmN0aW9uIHdpdGggd29vZCBwcmVzZXJ2YXRpdmUgYW5kIGFkaGVzaXZlIGNvbXBhdGliaWxpdHkgZm9yIGltcHJvdmVkIGJvbmQgcGVyZm9ybWFuY2UgaW4gcHJlc2VydmF0aXZlLXRyZWF0ZWQgRS4gZ3JhbmRpcyBsYW1pbmF0ZXMgd2VyZSBpbnZlc3RpZ2F0ZWQuIFRoZSByZXN1bHRzIG9idGFpbmVkIHNob3dlZCBzaWduaWZpY2FudCBhbmQgc2F0aXNmYWN0b3J5IGltcHJvdmVtZW50IGluIHNoZWFyIHN0cmVuZ3RoIGFuZCBkZWxhbWluYXRpb24gcmVzaXN0YW5jZSBvZiBFLiBncmFuZGlzIGxhbWluYXRlcyBiYXNlZCBvbiBFTiAxNDA4MDoyMDEzIFtUaW1iZXIgc3RydWN0dXJlcyDigJQgR2x1ZWQgbGFtaW5hdGVkIHRpbWJlciBhbmQgZ2x1ZWQgc29saWQgdGltYmVyIOKAlCBSZXF1aXJlbWVudHMsIEJTSSBTdGFuZC4gUHVibC4gKDIwMTQpIDHigJMxMTBdIHJlcXVpcmVtZW50cy4gVGhlIHN1aXRhYmlsaXR5IG9mIHBvbHl1cmV0aGFuZSwgbWVsYW1pbmUtdXJlYS1mb3JtYWxkZWh5ZGUsIGFuZCBwaGVub2wtcmVzb3JjaW5vbC1mb3JtYWxkZWh5ZGUgYWRoZXNpdmVzIGZvciBib25kaW5nIGNvcHBlciBhem9sZSAoQ0EpIGFuZCBkaXNvZGl1bSBvY3RhYm9yYXRlIHRldHJhaHlkcmF0ZSAoRE9UKS1pbXByZWduYXRlZCBFLiBncmFuZGlzIHdvb2Qgd2FzIGVzdGFibGlzaGVkLiBTYXRpc2ZhY3RvcnkgcGF0aHdheXMsIGluY2x1ZGluZyBncmVlbmVyIHByb2Nlc3Mgcm91dGVzIGZvciBtYW51ZmFjdHVyaW5nIENBIGFuZCBET1QtaW1wcmVnbmF0ZWQgRS4gZ3JhbmRpcyBsYW1pbmF0ZXMgZm9yIHN0cnVjdHVyYWwgYXBwbGljYXRpb25zIGluIHRyb3BpY2FsIGFuZCBzdWJ0cm9waWNhbCBjbGltZXMgd2VyZSBhY2hpZXZlZC4gVGhlIGVzdGFibGlzaGVkIHByb2Nlc3NlcyBjb3VsZCBiZSByZWFkaWx5IGFkb3B0ZWQgaW5kdXN0cmlhbGx5IHRvIGVuaGFuY2UgdGhlIGdsb2JhbCBpbXBsZW1lbnRhdGlvbiBvZiBzb2xpZCB3b29kIGNvbXBvc2l0ZXMgYW5kIHByb21vdGUgaGFyZHdvb2QgYm9uZGluZy59LAoJbnVtYmVyID0gezB9LAoJdXJsZGF0ZSA9IHsyMDIyLTA0LTExfSwKCWpvdXJuYWwgPSB7SW50ZXJuYXRpb25hbCBXb29kIFByb2R1Y3RzIEpvdXJuYWx9LAoJYXV0aG9yID0ge0FsYWRlLCBBZGVmZW1pIEFkZWJpc2kgYW5kIFdlc3NlbHMsIENvZW5yYWFkIEJyYW5kIGFuZCBTdG9semUsIEhhbm5lcyBhbmQgTWlsaXR6LCBIb2xnZXJ9LAoJbW9udGggPSBhcHIsCgl5ZWFyID0gezIwMjJ9LAoJbm90ZSA9IHtQdWJsaXNoZXI6IFRheWxvciBcJiBGcmFuY2lzClxfZXByaW50OiBodHRwczovL2RvaS5vcmcvMTAuMTA4MC8yMDQyNjQ0NS4yMDIyLjIwNTgyNzd9LAoJa2V5d29yZHMgPSB7YWRoZXNpb24sIEUuIGdyYW5kaXMsIGhhcmR3b29kIGJvbmRpbmcsIGJvbmQgZHVyYWJpbGl0eSwgYm9uZCBxdWFsaXR5LCBzb2xpZCB3b29kIGNvbXBvc2l0ZXMsIHdhdGVyLWJvcm5lIHByZXNlcnZhdGl2ZXMsIFdvb2QgcHJlc2VydmF0aW9ufSwKCXBhZ2VzID0gezEtLTl9LAp9CgoKCkBhcnRpY2xle3N0b2x6ZV9ub24tZGVzdHJ1Y3RpdmVfMjAyMiwKCXRpdGxlID0ge05vbi17RGVzdHJ1Y3RpdmV9IHtFdmFsdWF0aW9ufSBvZiB0aGUge0N1dHRpbmd9IHtTdXJmYWNlfSBvZiB7SGFyZHdvb2R9IHtGaW5nZXJ9IHtKb2ludHN9fSwKCXZvbHVtZSA9IHsyMn0sCgljb3B5cmlnaHQgPSB7aHR0cDovL2NyZWF0aXZlY29tbW9ucy5vcmcvbGljZW5zZXMvYnkvMy4wL30sCglpc3NuID0gezE0MjQtODIyMH0sCgl1cmwgPSB7aHR0cHM6Ly93d3cubWRwaS5jb20vMTQyNC04MjIwLzIyLzEwLzM4NTV9LAoJZG9pID0gezEwLjMzOTAvczIyMTAzODU1fSwKCWFic3RyYWN0ID0ge0luIHRoaXMgc3R1ZHksIHRoZSBzdXJmYWNlIHBhcmFtZXRlcnMgd2V0dGFiaWxpdHksIHJvdWdobmVzcywgYW5kIGFkaGVzaXZlIHBlbmV0cmF0aW9uLCB3aGljaCBhcmUgaW1wb3J0YW50IGZvciB3b29kIGJvbmRpbmcsIHdlcmUgaW52ZXN0aWdhdGVkIGFuZCBldmFsdWF0ZWQgdXRpbGl6aW5nIG5vbi1kZXN0cnVjdGl2ZSBtZXRob2RzIGFmdGVyIGRpZmZlcmVudCBtZWNoYW5pY2FsIHByb2Nlc3NpbmcuIEZvciB0aGlzIHB1cnBvc2UsIGJlZWNoIGFuZCBiaXJjaCBmaW5nZXIgam9pbnRzIHdlcmUgcHJlcGFyZWQgd2l0aCBkaWZmZXJlbnQgY3V0dGluZyBjb21iaW5hdGlvbnMgKHRocmVlIGN1dHRlcnMgd2l0aCBkaWZmZXJlbnQgc2hhcnBuZXNzIGxldmVscyBhbmQgdHdvIGZlZWQgcmF0ZXMpIGluIGFuIGluZHVzdHJpYWwgcHJvY2Vzcy4gRWZmZWN0cyBhbmQgaW50ZXJhY3Rpb25zIG9uIHRoZSBzdXJmYWNlIHBhcmFtZXRlcnMgcmVzdWx0aW5nIGZyb20gdGhlIGRpZmZlcmVudCBjdXR0aW5nIGNvbWJpbmF0aW9ucyB3ZXJlIGV2YWx1YXRlZCB1c2luZyB0aHJlZSBGdWxsIEZhY3RvcmlhbCBEZXNpZ25zLiBUaGUgdmFyaW91cyBjdXR0aW5nIHBhcmFtZXRlcnMgaGFkIGEgcHJlZG9taW5hbnRseSBzaWduaWZpY2FudCBpbmZsdWVuY2Ugb24gdGhlIHN1cmZhY2UgcGFyYW1ldGVycy4gVGhlIGVmZmVjdHMgYW5kIGlkZW50aWZpZWQgaW50ZXJhY3Rpb25zIGhpZ2hsaWdodCB0aGUgY29tcGxleGl0eSBvZiB0aGUgY3V0dGluZyBzdXJmYWNlIGFuZCB0aGUgaW1wb3J0YW5jZSBvZiB3b29kIGJvbmRpbmcuIEluIHRoaXMgcmVzcGVjdCwgYSBuZXcgZmluZGluZyBpcyB0aGF0IHdpdGggc2hhcnBlciBjdXR0ZXJzLCBoaWdoZXIgY29udGFjdCBhbmdsZXMgb2YgdGhlIGFkaGVzaXZlcyBvY2N1ci4gVGhlIG1ldGhvZHMgKGNvbnRhY3QgYW5nbGUgbWVhc3VyZW1lbnQsIGxhc2VyIHNjYW5uaW5nIG1pY3Jvc2NvcHksIGFuZCBicmlnaHRmaWVsZCBtaWNyb3Njb3B5KSB1c2VkIHdlcmUgd2VsbCBzdWl0ZWQgdG8gbWFrZSBlZmZlY3RzIHZpc2libGUgYW5kIHF1YW50aWZpYWJsZSwgd2hpY2ggY2FuIGJlIG9mIGludGVyZXN0IGZvciB0aGUgcXVhbGl0eSBjb250cm9sIG9mIHRoZSB3b29kIHByb2Nlc3NpbmcgaW5kdXN0cnkuIFRoZSByZXN1bHRzIGNhbiBoZWxwIHRvIGJldHRlciB1bmRlcnN0YW5kIGFuZCBldmFsdWF0ZSB0aGUgZGVzaWduIG9mIHdvb2Qgc3VyZmFjZXMgdmlhIG1hY2hpbmluZyBhbmQgdGhlIGJvbmRpbmcgb2YgaGFyZHdvb2RzLiBQb3NzaWJseSB0aGUgcmVzdWx0cyBjYW4gY29udHJpYnV0ZSB0byBmdXJ0aGVyIHN0YW5kYXJkaXppbmcgdGhlIHByb2R1Y3Rpb24gb2YgbG9hZC1iZWFyaW5nIGhhcmR3b29kIGZpbmdlciBqb2ludHMgYW5kIG1ha2luZyB0aGVtIG1vcmUgZWZmaWNpZW50Ln0sCglsYW5ndWFnZSA9IHtlbn0sCgludW1iZXIgPSB7MTB9LAoJdXJsZGF0ZSA9IHsyMDIyLTA1LTE5fSwKCWpvdXJuYWwgPSB7U2Vuc29yc30sCglhdXRob3IgPSB7U3RvbHplLCBIYW5uZXMgYW5kIEd1cm5paywgTWljaGFlbCBhbmQgS29kZGVuYmVyZywgVGltIGFuZCBLcsO2Z2VyLCBKb25hcyBhbmQgS8O2aGxlciwgUm9iZXJ0IGFuZCBWacO2bCwgV29sZmdhbmcgYW5kIE1pbGl0eiwgSG9sZ2VyfSwKCW1vbnRoID0gamFuLAoJeWVhciA9IHsyMDIyfSwKCW5vdGUgPSB7TnVtYmVyOiAxMApQdWJsaXNoZXI6IE11bHRpZGlzY2lwbGluYXJ5IERpZ2l0YWwgUHVibGlzaGluZyBJbnN0aXR1dGV9LAoJa2V5d29yZHMgPSB7d2V0dGFiaWxpdHksIGhhcmR3b29kLCByb3VnaG5lc3MsIG5vbi1kZXN0cnVjdGl2ZSBldmFsdWF0aW9uLCBhZGhlc2l2ZSBwZW5ldHJhdGlvbiwgY3V0dGluZyBzdXJmYWNlLCBmaW5nZXItam9pbnRpbmcsIHdvb2QgY2hhcmFjdGVyaXphdGlvbn0sCglwYWdlcyA9IHszODU1fSwKCWZpbGUgPSB7RnVsbCBUZXh0IFBERjpDXDpcXFVzZXJzXFxtYWljaGVyXFxab3Rlcm9cXHN0b3JhZ2VcXEg0V1dGNTZHXFxTdG9semUgZXQgYWwuIC0gMjAyMiAtIE5vbi1EZXN0cnVjdGl2ZSBFdmFsdWF0aW9uIG9mIHRoZSBDdXR0aW5nIFN1cmZhY2UgLnBkZjphcHBsaWNhdGlvbi9wZGY7c2Vuc29ycy0yMi0wMzg1NS5wZGY6Q1w6XFxVc2Vyc1xcbWFpY2hlclxcWm90ZXJvXFxzdG9yYWdlXFxKNlMyQlVNM1xcc2Vuc29ycy0yMi0wMzg1NS5wZGY6YXBwbGljYXRpb24vcGRmfSwKfQoKCgpAYXJ0aWNsZXthbGFkZV9jaGFyYWN0ZXJpemluZ18yMDIyLAoJdGl0bGUgPSB7Q2hhcmFjdGVyaXppbmcgc3VyZmFjZSBhZGhlc2lvbi1yZWxhdGVkIGNoZW1pY2FsIHByb3BlcnRpZXMgb2YgY29wcGVyIGF6b2xlIGFuZCBkaXNvZGl1bSBvY3RhYm9yYXRlIHRldHJhaHlkcmF0ZS1pbXByZWduYXRlZCB7RXVjYWx5cHR1c30gZ3JhbmRpcyB3b29kfSwKCXZvbHVtZSA9IHswfSwKCWlzc24gPSB7MDE2OS00MjQzfSwKCXVybCA9IHtodHRwczovL2RvaS5vcmcvMTAuMTA4MC8wMTY5NDI0My4yMDIyLjIxMjUyMDh9LAoJZG9pID0gezEwLjEwODAvMDE2OTQyNDMuMjAyMi4yMTI1MjA4fSwKCWFic3RyYWN0ID0ge0luLWRlcHRoIGtub3dsZWRnZSBvZiB0aGUgaW50ZXJhY3Rpb24gZWZmZWN0cyBvZiB3b29kIGFuZCBwcmVzZXJ2YXRpdmUgY2hlbWljYWxzIG9uIHN1cmZhY2UgYWRoZXNpb24gY2hhcmFjdGVyaXN0aWNzIGlzIGNydWNpYWwgZm9yIGRldmVsb3BpbmcgcGF0aHdheXMgdG8gaW1wcm92ZSB0aGUgYWRoZXNpdmUgYm9uZGluZyBvZiB0cmVhdGVkIHdvb2RzLiBUaGVyZWZvcmUsIHRoaXMgc3R1ZHkgaW52ZXN0aWdhdGVkIGZ1bmRhbWVudGFsIGNoYW5nZXMgaW4gdGhlIHN1cmZhY2UgYWRoZXNpb24tcmVsYXRlZCBjaGVtaWNhbCBjaGFyYWN0ZXJpc3RpY3Mgb2YgRS4gZ3JhbmRpcyBzYXB3b29kIGFuZCBoZWFydHdvb2QgaW1wcmVnbmF0ZWQgd2l0aCBjb3BwZXIgYXpvbGUgKENBKSBhbmQgZGlzb2RpdW0gb2N0YWJvcmF0ZSB0ZXRyYWh5ZHJhdGUgKERPVCkgd29vZCBwcmVzZXJ2YXRpdmVzLiBUaGUgY2hhcmFjdGVyaXphdGlvbiB0ZWNobmlxdWVzIGVtcGxveWVkIGluY2x1ZGUgc2Nhbm5pbmcgZWxlY3Ryb24gbWljcm9zY29weSBpbnRlZ3JhdGVkIHdpdGggZW5lcmd5LWRpc3BlcnNpdmUgWC1yYXkgc3BlY3Ryb3Njb3B5IGFuZCBGb3VyaWVyIHRyYW5zZm9ybWVkIGluZnJhcmVkIHNwZWN0cm9zY29weS4gVGhlIHJlc3VsdHMgb2J0YWluZWQgcmV2ZWFsZWQgdGhhdCBDQSBhbmQgRE9UIGltcHJlZ25hdGlvbnMgc2lnbmlmaWNhbnRseSBhbHRlcmVkIHRoZSBhY2lkaXR5IGFuZCByZWR1Y2VkIHRoZSBwb2xhciBmdW5jdGlvbmFsIGdyb3VwcyBvbiBFLiBncmFuZGlzIHNhcHdvb2QgYW5kIGhlYXJ0d29vZCBzdXJmYWNlcy4gVGhlIGVmZmVjdCB3YXMgbW9yZSBwcm9ub3VuY2VkIHdpdGggRE9UIGltcHJlZ25hdGlvbiBhbmQgb24gdGhlIHNhcHdvb2QuIFRoZSBvYnNlcnZlZCBtb2RpZmljYXRpb25zIHNpZ25hbCB0aGF0IHRoZSBDQS0gYW5kIERPVC10cmVhdGVkIHdvb2QgYWRoZXNpb24gY291bGQgYmUgaW5oaWJpdGVkIGR1ZSB0byByZWR1Y2VkIG9wcG9ydHVuaXR5IGZvciBjaGVtaWNhbCBib25kaW5nIGJldHdlZW4gdGhlIHRyZWF0ZWQgd29vZCBhbmQgYWRoZXNpdmUgbW9sZWN1bGVzLiBGdXJ0aGVybW9yZSwgdGhlcmUgaXMgYSBoaWdoIGxpa2VsaWhvb2Qgb2YgdGhlIGhpbmRyYW5jZSBvZiBhZGhlc2lvbiB2aWEgbWVjaGFuaWNhbCBpbnRlcmxvY2tpbmcgYXMgYSByZXN1bHQgb2YgY2hlbWljYWwgZGVwb3NpdHMsIHBhcnRpY3VsYXJseSBpbiBjb3BwZXIgYXpvbGUtaW1wcmVnbmF0ZWQgd29vZC4gQ29uc2lkZXJpbmcgdGhlIG9ic2VydmVkIGNoYW5nZXMgaW4gdGhlIHN1cmZhY2UgY2hlbWljYWwgY2hhcmFjdGVyaXN0aWNzIG9mIHRoZSBDQSBhbmQgRE9ULWltcHJlZ25hdGVkIEUuIGdyYW5kaXMsIGFkaGVzaXZlIGNvbXBhdGliaWxpdHkgYW5kIGFkYXB0aW5nIGJvbmRpbmcgcGFyYW1ldGVycywgc3VjaCBhcyBhc3NlbWJseSB0aW1lIGFuZCBib25kaW5nIHByZXNzdXJlIGNvdWxkIGJlIHZpdGFsIGluIGVuc3VyaW5nIGFkZXF1YXRlIGJvbmRpbmcgb2YgdGhlIHRyZWF0ZWQgRS4gZ3JhbmRpcyB3b29kLn0sCgludW1iZXIgPSB7MH0sCgl1cmxkYXRlID0gezIwMjItMDktMjZ9LAoJam91cm5hbCA9IHtKb3VybmFsIG9mIEFkaGVzaW9uIFNjaWVuY2UgYW5kIFRlY2hub2xvZ3l9LAoJYXV0aG9yID0ge0FsYWRlLCBBZGVmZW1pIEFkZWJpc2kgYW5kIE5hZ2hpemFkZWgsIFphaHJhIGFuZCBXZXNzZWxzLCBDb2VucmFhZCBCcmFuZCBhbmQgU3RvbHplLCBIYW5uZXMgYW5kIE1pbGl0eiwgSG9sZ2VyfSwKCW1vbnRoID0gc2VwLAoJeWVhciA9IHsyMDIyfSwKCW5vdGUgPSB7UHVibGlzaGVyOiBUYXlsb3IgXCYgRnJhbmNpcwpcX2VwcmludDogaHR0cHM6Ly9kb2kub3JnLzEwLjEwODAvMDE2OTQyNDMuMjAyMi4yMTI1MjA4fSwKCWtleXdvcmRzID0ge2FkaGVzaW9uLCBGVElSLCBFdWNhbHlwdHVzIGdyYW5kaXMsIFdvb2QgcHJlc2VydmF0aW9uLCBTRU0tRURTLCBzdXJmYWNlIG1vZGlmaWNhdGlvbn0sCglwYWdlcyA9IHsxLS0yNH0sCn0KCgoKQGlucHJvY2VlZGluZ3N7c3RvbHplX3NlbGYtbG9ja2luZ18yMDIyLAoJYWRkcmVzcyA9IHtTb3Byb24sIEh1bmdhcnl9LAoJdGl0bGUgPSB7U2VsZi1sb2NraW5nIG9mIGZpbmdlciBqb2ludHMgLSB7SW5mbHVlbmNlfSBvZiBkZW5zaXR5IGFuZCBtb2lzdHVyZSBjb250ZW50fSwKCWlzYm4gPSB7OTc4LTk2My0zMzQtNDQ2LTB9LAoJbGFuZ3VhZ2UgPSB7RU59LAoJYm9va3RpdGxlID0ge0hhcmR3b29kIHtDb25mZXJlbmNlfSB7UHJvY2VlZGluZ3N9fSwKCXB1Ymxpc2hlciA9IHtVbml2ZXJzaXR5IG9mIFNvcHJvbiBQcmVzc30sCglhdXRob3IgPSB7U3RvbHplLCBIYW5uZXMgYW5kIFRyYXV0d2VpbiwgSmFuLUZyZWRlcmlrIGFuZCBNYXllciwgQWFyb24gS2lsYW4gYW5kIFRoZWlzLCBWaW9yaWNhIGFuZCBCb2xsbXVzLCBTdXNhbm5lIGFuZCBNaWxpdHosIEhvbGdlcn0sCgl5ZWFyID0gezIwMjJ9LAoJcGFnZXMgPSB7MzE3LS0zMjN9LAp9CgoKCkBhcnRpY2xle3N0b2x6ZV9kZXRlcm1pbmF0aW9uXzIwMjMsCgl0aXRsZSA9IHtEZXRlcm1pbmF0aW9uIG9mIHRoZSB7Qm9uZGluZ30ge1N0cmVuZ3RofSBvZiB7RmluZ2VyfSB7Sm9pbnRzfSB7VXNpbmd9IGEge05ld30ge1Rlc3R9IHtTcGVjaW1lbn0ge0dlb21ldHJ5fX0sCgl2b2x1bWUgPSB7MH0sCglhYnN0cmFjdCA9IHtJbiB0aGlzIHN0dWR5LCBhIHNwZWNpbWVuIGdlb21ldHJ5IGZvciB0ZXN0aW5nIO+sgW5nZXIgam9pbnRzIHdhcyBkZXZlbG9wZWQgdXNpbmcg76yBbml0ZSBlbGVtZW50IHNpbXVsYXRpb24gYW5kIHByb29mZWQgYnkgZXhwZXJpbWVudGFsIHRlc3RpbmcuIFNpeCBkaWZmZXJlbnQgd29vZCBzcGVjaWVzIGFuZCB0aHJlZSBhZGhlc2l2ZXMgd2VyZSB1c2VkIGZvciDvrIFuZ2VyLWpvaW50aW5nIHNwZWNpbWVucy4gV2l0aCB0aGUgdGVzdCBzcGVjaW1lbiBnZW9tZXRyeSwgdGhlIGJvbmRpbmcgc3RyZW5ndGggb2YgdGhlIO+sgW5nZXIgam9pbnRzIHdhcyBkZXRlcm1pbmVkIHdpdGhvdXQgdGhlIHVzdWFsIHNlbGYtbG9ja2luZyBvZiB0aGUgam9pbnQuIFVuZGVyIGxvYWQsIHRoZSB0ZXN0IHNwZWNpbWVuIGdlb21ldHJ5IGludHJvZHVjZXMgbWF4aW11bSBzdHJlc3MgYXQgdGhlIGJlZ2lubmluZyBvZiB0aGUgYm9uZCBsaW5lIChhZGhlc2l2ZSB6b25lKS4gSG93ZXZlciwgdGhlIHRlc3Qgc3BlY2ltZW4gZ2VvbWV0cnkgZG9lcyBub3QgZ2VuZXJhdGUgYSBzeW1tZXRyaWMgc3RyZXNzIHN0YXRlLiBUaGUgbWFpbiBkaWbvrIFjdWx0eSBoZXJlIGlzIHRoZSDvrIJhbmsgYW5nbGUgb2YgdGhlIO+sgW5nZXIgam9pbnQgZ2VvbWV0cnkuIFRoZSB3b29kIHNwZWNpZXMgYW5kIGFkaGVzaXZlcyBzaWduae+sgWNhbnRseSBpbu+sgnVlbmNlZCB0aGUgcGVyZm9ybWFuY2Ugb2YgdGhlIO+sgW5nZXIgam9pbnRzLn0sCglsYW5ndWFnZSA9IHtlbn0sCgludW1iZXIgPSB7MH0sCglqb3VybmFsID0ge1Byb2Nlc3N9LAoJYXV0aG9yID0ge1N0b2x6ZSwgSGFubmVzIGFuZCBHdXJuaWssIE1pY2hhZWwgYW5kIEtlZ2VsLCBTZWJhc3RpYW4gYW5kIEJvbGxtdXMsIFN1c2FubmUgYW5kIE1pbGl0eiwgSG9sZ2VyfSwKCXllYXIgPSB7MjAyM30sCglmaWxlID0ge1N0b2x6ZSBldCBhbC4gLSAyMDIzIC0gRGV0ZXJtaW5hdGlvbiBvZiB0aGUgQm9uZGluZyBTdHJlbmd0aCBvZiBGaW5nZXIgSm8ucGRmOkNcOlxcVXNlcnNcXG1haWNoZXJcXFpvdGVyb1xcc3RvcmFnZVxcU1JLS1FDWkFcXFN0b2x6ZSBldCBhbC4gLSAyMDIzIC0gRGV0ZXJtaW5hdGlvbiBvZiB0aGUgQm9uZGluZyBTdHJlbmd0aCBvZiBGaW5nZXIgSm8ucGRmOmFwcGxpY2F0aW9uL3BkZn0sCn0KCgoKQHRlY2hyZXBvcnR7c3RvbHplX3NwZXppZmlzY2hlXzIwMTYsCglhZGRyZXNzID0ge0fDtnR0aW5nZW59LAoJdHlwZSA9IHtCYWNoZWxvcmFyYmVpdH0sCgl0aXRsZSA9IHtTcGV6aWZpc2NoZSB7U29ydGllcnVuZ30gdm9uIHtQcsO8ZmvDtnJwZXJufSBhdXMge0J1Y2hlbn0tIHVuZCB7S2llZmVybnNwbGludGhvbHp9IG5hY2gge0tyaXRlcmllbn0genVyIHtQcsO8ZnVuZ30gdm9uIGVsYXN0by1tZWNoYW5pc2NoZW4ge0VpZ2Vuc2NoYWZ0ZW59IC0ge1NwZWNpZmljfSBzb3J0aW5nIG9mIGJlZWNoIGFuZCBwaW5lIHNhcHdvb2QgYWNjb3JkaW5nIHRvIHRoZSBjcml0ZXJpYSBmb3IgdGVzdGluZyB0aGUgZWxhc3RvLW1lY2hhbmljYWwgY2hhcmFjdGVyaXN0aWNzfSwKCWxhbmd1YWdlID0ge2RldXRzY2h9LAoJaW5zdGl0dXRpb24gPSB7R2VvcmctQXVndXN0LVVuaXZlcnNpdMOkdCBHw7Z0dGluZ2VuLCBGYWt1bHTDpHQgZsO8ciBGb3JzdHdpc3NlbnNjaGFmdGVuIHVuZCBXYWxkw7Zrb2xvZ2llLCBBYnRlaWx1bmcgSG9semJpb2xvZ2llIHVuZCBIb2x6cHJvZHVrdGV9LAoJYXV0aG9yID0ge1N0b2x6ZSwgSGFubmVzfSwKCXllYXIgPSB7MjAxNn0sCglub3RlID0gezEuIFByw7xmZXI6IERyLiBBbnRqZSBHZWxsZXJpY2gKMi4gUHLDvGZlcjogUHJvZi4gRHIuIEhvbGdlciBNaWxpdHp9LAp9Cg==\">\n            <i class=\"fa fa-download fa-fw\"></i> Download BibTeX\n          </a>\n        </li>\n        <li>\n          <a href=\"//bibbase.org/rss?bib=https://owncloud.gwdg.de/index.php/s/fECyZmHesnTDg1n/download\">\n            <i class=\"fa fa-rss fa-fw\"></i> RSS Feed\n          </a>\n          </li>\n      </ul>\n      </li>\n\n      \n\n\n      \n    </ul>\n\n\n    <div class=\"alert alert-success bibbase_msg\" id=\"bibbase_msg_embed\"\n         style=\"display: none;\">\n\n      Excellent! Next you can\n      <a href=\"/network/register?next=/network/newSiteFromTemplate%3Fbiburl=https://owncloud.gwdg.de/index.php/s/fECyZmHesnTDg1n/download\"\n      >create a new website with this list</a>, or\n      embed it in an existing web page by copying &amp; pasting\n      any of the following snippets.\n\n      <div style=\"text-align: left; margin-top: 1em;\">\n        <strong>JavaScript</strong>\n        <span class=\"comment recommended\">(easiest)</span>\n        <div class=\"well well-small\">\n          <code>\n            &lt;script src=\"https://bibbase.org/show?bib=https://owncloud.gwdg.de/index.php/s/fECyZmHesnTDg1n/download&amp;jsonp=1&amp;jsonp=1\"&gt;&lt;/script&gt;\n          </code>\n        </div>\n\n        <strong>PHP</strong>\n        <div class=\"well well-small\">\n          <code>\n            &lt;?php\n            $contents = file_get_contents(\"https://bibbase.org/show?bib=https://owncloud.gwdg.de/index.php/s/fECyZmHesnTDg1n/download&amp;jsonp=1\");\n            print_r($contents);\n            ?&gt;\n          </code>\n        </div>\n\n        <strong>iFrame</strong>\n        <span class=\"comment\">(not recommended)</span>\n        <div class=\"well well-small\">\n          <code>\n            &lt;iframe src=\"https://bibbase.org/show?bib=https://owncloud.gwdg.de/index.php/s/fECyZmHesnTDg1n/download&amp;jsonp=1\"&gt;&lt;/iframe&gt;\n          </code>\n        </div>\n\n        <p>\n          For more details see the <a href=\"//bibbase.org/help\">documention</a>.\n        </p>\n      </div>\n    </div>\n\n    <div class=\"alert alert-success bibbase_msg\" id=\"bibbase_msg_preview\"\n         style=\"display: none;\">\n\n      This is a preview! To use this list on your own web site\n      or create a new web site from it,\n      <a href=\"/network/register?next=/network/newAccountWithFile%3FfileId=\"\n      >create a free account</a>. The file will be added\n      and you will be able to edit it in the File Manager.\n      We will show you instructions once you've created your account.\n    </div>\n\n    <div class=\"alert alert-warning bibbase_msg\" id=\"bibbase_msg_mendeley1\"\n         style=\"display: none;\">\n\n      <p>To the site owner:</p>\n\n      <p><strong>Action required!</strong> Mendeley is changing its\n        API. In order to keep using Mendeley with BibBase past April\n        14th, you need to:\n        <ol>\n          <li>renew the authorization for BibBase on Mendeley, and</li>\n          <li>update the BibBase URL\n            in your page the same way you did when you initially set up\n            this page.\n          </li>\n        </ol>\n      </p>\n\n      <p>\n        <a href=\"http://bibbase.org/cgi-bin/mendeley2/get.py\">\n          <i class=\"fa fa-angle-double-right\"></i>\n          Fix it now</a>\n      </p>\n    </div>\n\n  </div>\n\n\n  <div id=\"bibbase_body\">\n    \n  \n  <div class=\"bibbase_group_whole\" id=\"group_2023\">\n    <div class=\"bibbase_group\"\n      onclick=\"toggleGroup('group_2023')\"\n      onkeypress=\"toggleGroup('group_2023')\"\n      tabindex=\"0\">\n      <i class=\"fa fa-angle-down bibbase_group_head_icon\"></i>&nbsp;\n      <span>2023</span>\n      <span class=\"bibbase_group_count\">\n        \n        (1)\n        \n      </span>\n    </div>\n    <div class=\"bibbase_group_body\">\n      \n  \n  <div class=\"bibbase_paper\" id=\"stolze-gurnik-kegel-bollmus-militz-determinationofthebondingstrengthoffingerjointsusinganewtestspecimengeometry-2023\">\n  <span class=\"bibbase_paper_titleauthoryear\">\n\n  \n  <span class=\"bibbase_paper_title\">\n  \n  \n  \n  Determination of the Bonding Strength of Finger Joints Using a New Test Specimen Geometry.\n  \n  \n  \n</span>\n\n  <span class=\"bibbase_paper_author\">\n  <a class=\"bibbase author link\" href=\"https://uni-goettingen.de/de/655065.html\">Stolze, H.</a>; Gurnik, M.; Kegel, S.; Bollmus, S.;  and Militz, H.\n</span>\n\n  \n\n</span>\n\n  <i>Process</i>, 0(0).  2023.\n  <span class=\"note\"></span>\n\n<span class=\"bibbase_note\"></span>\n\n<br class=\"bibbase_paper_content\"/>\n\n<span class=\"bibbase_paper_content dontprint\">\n\n  \n\n  \n\n  \n  <a href=\"//bibbase.org/network/publication/stolze-gurnik-kegel-bollmus-militz-determinationofthebondingstrengthoffingerjointsusinganewtestspecimengeometry-2023\"\n     class=\"bibbase bibbase_page link\">link</a>\n  &nbsp;\n  \n\n  <a href=\"#\"\n     onclick=\"showBib(event); return false;\"\n     class=\"bibbase bibtex link\">bibtex\n    <i class=\"fa fa-caret-down\"></i></a>\n\n  \n  &nbsp;\n  <a class=\"bibbase_abstract_link bibbase link\"\n     href=\"#\"\n     onclick=\"showAbstract(event); return false;\">\n    abstract <i class=\"fa fa-caret-down\"></i></a>\n  \n\n  \n\n  <!-- <a class=\"bibbase read link hidden\" -->\n  <!--    href=\"javascript:toggleRead('stolze-gurnik-kegel-bollmus-militz-determinationofthebondingstrengthoffingerjointsusinganewtestspecimengeometry-2023')\" -->\n  <!--    title=\"Marking this paper as read adds it to your library on BibBase.\" -->\n  <!--    > -->\n  <!--   <i class=\"fa fa-check\"></i>&nbsp; -->\n  <!--   <span>mark as read</span> -->\n  <!-- </a> -->\n\n  &nbsp;\n  \n  \n\n</span>\n\n<div class=\"well well-small bibbase\" data-type=\"bibtex\"\n     style=\"display:none\">\n  <pre style=\"white-space: pre-wrap;\">@article{stolze_determination_2023,\n\ttitle = {Determination of the {Bonding} {Strength} of {Finger} {Joints} {Using} a {New} {Test} {Specimen} {Geometry}},\n\tvolume = {0},\n\tabstract = {In this study, a specimen geometry for testing finger joints was developed using finite element simulation and proofed by experimental testing. Six different wood species and three adhesives were used for finger-jointing specimens. With the test specimen geometry, the bonding strength of the finger joints was determined without the usual self-locking of the joint. Under load, the test specimen geometry introduces maximum stress at the beginning of the bond line (adhesive zone). However, the test specimen geometry does not generate a symmetric stress state. The main difficulty here is the flank angle of the finger joint geometry. The wood species and adhesives significantly influenced the performance of the finger joints.},\n\tlanguage = {en},\n\tnumber = {0},\n\tjournal = {Process},\n\tauthor = {Stolze, Hannes and Gurnik, Michael and Kegel, Sebastian and Bollmus, Susanne and Militz, Holger},\n\tyear = {2023},\n\tfile = {Stolze et al. - 2023 - Determination of the Bonding Strength of Finger Jo.pdf:C\\:\\\\Users\\\\maicher\\\\Zotero\\\\storage\\\\SRKKQCZA\\\\Stolze et al. - 2023 - Determination of the Bonding Strength of Finger Jo.pdf:application/pdf},\n}\n\n</pre>\n</div>\n\n\n<div class=\"well well-small bibbase\" data-type=\"abstract\"\n     style=\"display:none\">\n  In this study, a specimen geometry for testing finger joints was developed using finite element simulation and proofed by experimental testing. Six different wood species and three adhesives were used for finger-jointing specimens. With the test specimen geometry, the bonding strength of the finger joints was determined without the usual self-locking of the joint. Under load, the test specimen geometry introduces maximum stress at the beginning of the bond line (adhesive zone). However, the test specimen geometry does not generate a symmetric stress state. The main difficulty here is the flank angle of the finger joint geometry. The wood species and adhesives significantly influenced the performance of the finger joints.\n</div>\n\n\n</div>\n\n\n\n\n\n    </div>\n  </div>\n\n  <div class=\"bibbase_group_whole\" id=\"group_2022\">\n    <div class=\"bibbase_group\"\n      onclick=\"toggleGroup('group_2022')\"\n      onkeypress=\"toggleGroup('group_2022')\"\n      tabindex=\"0\">\n      <i class=\"fa fa-angle-down bibbase_group_head_icon\"></i>&nbsp;\n      <span>2022</span>\n      <span class=\"bibbase_group_count\">\n        \n        (4)\n        \n      </span>\n    </div>\n    <div class=\"bibbase_group_body\">\n      \n  \n  <div class=\"bibbase_paper\" id=\"alade-wessels-stolze-militz-improvedadhesivebondperformanceincopperazoleanddisodiumoctaboratetetrahydratetreatedeucalyptusgrandislaminates-2022\">\n  <span class=\"bibbase_paper_titleauthoryear\">\n\n  \n  <span class=\"bibbase_paper_title\">\n  \n  \n  \n  <a href=\"https://doi.org/10.1080/20426445.2022.2058277\"\n     onclick=\"return trackOutboundLink('publications', 'click', 'alade-wessels-stolze-militz-improvedadhesivebondperformanceincopperazoleanddisodiumoctaboratetetrahydratetreatedeucalyptusgrandislaminates-2022', 'https://doi.org/10.1080/20426445.2022.2058277', event);\">\n    Improved adhesive-bond performance in copper azole and disodium octaborate tetrahydrate-treated Eucalyptus grandis laminates.\n  </a>\n  \n  \n  \n</span>\n\n  <span class=\"bibbase_paper_author\">\n  Alade, A. A.; Wessels, C. B.; <a class=\"bibbase author link\" href=\"https://uni-goettingen.de/de/655065.html\">Stolze, H.</a>;  and Militz, H.\n</span>\n\n  \n\n</span>\n\n  <i>International Wood Products Journal</i>, 0(0): 1–9. April 2022.\n  <span class=\"note\">Publisher: Taylor & Francis _eprint: https://doi.org/10.1080/20426445.2022.2058277</span>\n\n<span class=\"bibbase_note\"></span>\n\n<br class=\"bibbase_paper_content\"/>\n\n<span class=\"bibbase_paper_content dontprint\">\n\n  \n  <a href=\"https://doi.org/10.1080/20426445.2022.2058277\"\n     onclick=\"log_download('alade-wessels-stolze-militz-improvedadhesivebondperformanceincopperazoleanddisodiumoctaboratetetrahydratetreatedeucalyptusgrandislaminates-2022', 'https://doi.org/10.1080/20426445.2022.2058277', event.ctrlKey, event)\">\n    <img src=\"//bibbase.org/img/filetypes/link.svg\"\n\t     alt=\"Improved adhesive-bond performance in copper azole and disodium octaborate tetrahydrate-treated Eucalyptus grandis laminates [link]\"\n       title=\"Paper\"\n\t     class=\"bibbase_icon\"\n         ><span class=\"bibbase_icon_text\">Paper</span></a>\n  &nbsp;\n  \n\n  \n  <a href=\"http://doi.org/10.1080/20426445.2022.2058277\"\n     onclick=\"log_download('alade-wessels-stolze-militz-improvedadhesivebondperformanceincopperazoleanddisodiumoctaboratetetrahydratetreatedeucalyptusgrandislaminates-2022', 'http://doi.org/10.1080/20426445.2022.2058277', event.ctrlKey)\"\n     class=\"bibbase doi link\">\n    <span>doi</span></a>\n  &nbsp;\n  \n\n  \n  <a href=\"//bibbase.org/network/publication/alade-wessels-stolze-militz-improvedadhesivebondperformanceincopperazoleanddisodiumoctaboratetetrahydratetreatedeucalyptusgrandislaminates-2022\"\n     class=\"bibbase bibbase_page link\">link</a>\n  &nbsp;\n  \n\n  <a href=\"#\"\n     onclick=\"showBib(event); return false;\"\n     class=\"bibbase bibtex link\">bibtex\n    <i class=\"fa fa-caret-down\"></i></a>\n\n  \n  &nbsp;\n  <a class=\"bibbase_abstract_link bibbase link\"\n     href=\"#\"\n     onclick=\"showAbstract(event); return false;\">\n    abstract <i class=\"fa fa-caret-down\"></i></a>\n  \n\n  \n\n  <!-- <a class=\"bibbase read link hidden\" -->\n  <!--    href=\"javascript:toggleRead('alade-wessels-stolze-militz-improvedadhesivebondperformanceincopperazoleanddisodiumoctaboratetetrahydratetreatedeucalyptusgrandislaminates-2022')\" -->\n  <!--    title=\"Marking this paper as read adds it to your library on BibBase.\" -->\n  <!--    > -->\n  <!--   <i class=\"fa fa-check\"></i>&nbsp; -->\n  <!--   <span>mark as read</span> -->\n  <!-- </a> -->\n\n  &nbsp;\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n\n</span>\n\n<div class=\"well well-small bibbase\" data-type=\"bibtex\"\n     style=\"display:none\">\n  <pre style=\"white-space: pre-wrap;\">@article{alade_improved_2022,\n\ttitle = {Improved adhesive-bond performance in copper azole and disodium octaborate tetrahydrate-treated {Eucalyptus} grandis laminates},\n\tvolume = {0},\n\tissn = {2042-6445},\n\turl = {https://doi.org/10.1080/20426445.2022.2058277},\n\tdoi = {10.1080/20426445.2022.2058277},\n\tabstract = {The prospect of manufacturing durable structural laminated wood with copper and boron-based preservative-impregnated Eucalyptus grandis wood was previously investigated but revealed adhesive-bond performance below standard requirements. In this study, bonding process factors, viz. mechanical pretreatment (surface planing) and bonding pressure in conjunction with wood preservative and adhesive compatibility for improved bond performance in preservative-treated E. grandis laminates were investigated. The results obtained showed significant and satisfactory improvement in shear strength and delamination resistance of E. grandis laminates based on EN 14080:2013 [Timber structures — Glued laminated timber and glued solid timber — Requirements, BSI Stand. Publ. (2014) 1–110] requirements. The suitability of polyurethane, melamine-urea-formaldehyde, and phenol-resorcinol-formaldehyde adhesives for bonding copper azole (CA) and disodium octaborate tetrahydrate (DOT)-impregnated E. grandis wood was established. Satisfactory pathways, including greener process routes for manufacturing CA and DOT-impregnated E. grandis laminates for structural applications in tropical and subtropical climes were achieved. The established processes could be readily adopted industrially to enhance the global implementation of solid wood composites and promote hardwood bonding.},\n\tnumber = {0},\n\turldate = {2022-04-11},\n\tjournal = {International Wood Products Journal},\n\tauthor = {Alade, Adefemi Adebisi and Wessels, Coenraad Brand and Stolze, Hannes and Militz, Holger},\n\tmonth = apr,\n\tyear = {2022},\n\tnote = {Publisher: Taylor \\&amp; Francis\n\\_eprint: https://doi.org/10.1080/20426445.2022.2058277},\n\tkeywords = {adhesion, E. grandis, hardwood bonding, bond durability, bond quality, solid wood composites, water-borne preservatives, Wood preservation},\n\tpages = {1--9},\n}\n\n</pre>\n</div>\n\n\n<div class=\"well well-small bibbase\" data-type=\"abstract\"\n     style=\"display:none\">\n  The prospect of manufacturing durable structural laminated wood with copper and boron-based preservative-impregnated Eucalyptus grandis wood was previously investigated but revealed adhesive-bond performance below standard requirements. In this study, bonding process factors, viz. mechanical pretreatment (surface planing) and bonding pressure in conjunction with wood preservative and adhesive compatibility for improved bond performance in preservative-treated E. grandis laminates were investigated. The results obtained showed significant and satisfactory improvement in shear strength and delamination resistance of E. grandis laminates based on EN 14080:2013 [Timber structures — Glued laminated timber and glued solid timber — Requirements, BSI Stand. Publ. (2014) 1–110] requirements. The suitability of polyurethane, melamine-urea-formaldehyde, and phenol-resorcinol-formaldehyde adhesives for bonding copper azole (CA) and disodium octaborate tetrahydrate (DOT)-impregnated E. grandis wood was established. Satisfactory pathways, including greener process routes for manufacturing CA and DOT-impregnated E. grandis laminates for structural applications in tropical and subtropical climes were achieved. The established processes could be readily adopted industrially to enhance the global implementation of solid wood composites and promote hardwood bonding.\n</div>\n\n\n</div>\n\n\n  <div class=\"bibbase_paper\" id=\"stolze-gurnik-koddenberg-krger-khler-vil-militz-nondestructiveevaluationofthecuttingsurfaceofhardwoodfingerjoints-2022\">\n  <span class=\"bibbase_paper_titleauthoryear\">\n\n  \n  <span class=\"bibbase_paper_title\">\n  \n  \n  \n  <a href=\"https://www.mdpi.com/1424-8220/22/10/3855\"\n     onclick=\"return trackOutboundLink('publications', 'click', 'stolze-gurnik-koddenberg-krger-khler-vil-militz-nondestructiveevaluationofthecuttingsurfaceofhardwoodfingerjoints-2022', 'https://www.mdpi.com/1424-8220/22/10/3855', event);\">\n    Non-Destructive Evaluation of the Cutting Surface of Hardwood Finger Joints.\n  </a>\n  \n  \n  \n</span>\n\n  <span class=\"bibbase_paper_author\">\n  <a class=\"bibbase author link\" href=\"https://uni-goettingen.de/de/655065.html\">Stolze, H.</a>; Gurnik, M.; Koddenberg, T.; Kröger, J.; Köhler, R.; Viöl, W.;  and Militz, H.\n</span>\n\n  \n\n</span>\n\n  <i>Sensors</i>, 22(10): 3855. January 2022.\n  <span class=\"note\">Number: 10 Publisher: Multidisciplinary Digital Publishing Institute</span>\n\n<span class=\"bibbase_note\"></span>\n\n<br class=\"bibbase_paper_content\"/>\n\n<span class=\"bibbase_paper_content dontprint\">\n\n  \n  <a href=\"https://www.mdpi.com/1424-8220/22/10/3855\"\n     onclick=\"log_download('stolze-gurnik-koddenberg-krger-khler-vil-militz-nondestructiveevaluationofthecuttingsurfaceofhardwoodfingerjoints-2022', 'https://www.mdpi.com/1424-8220/22/10/3855', event.ctrlKey, event)\">\n    <img src=\"//bibbase.org/img/filetypes/link.svg\"\n\t     alt=\"Non-Destructive Evaluation of the Cutting Surface of Hardwood Finger Joints [link]\"\n       title=\"Paper\"\n\t     class=\"bibbase_icon\"\n         ><span class=\"bibbase_icon_text\">Paper</span></a>\n  &nbsp;\n  \n\n  \n  <a href=\"http://doi.org/10.3390/s22103855\"\n     onclick=\"log_download('stolze-gurnik-koddenberg-krger-khler-vil-militz-nondestructiveevaluationofthecuttingsurfaceofhardwoodfingerjoints-2022', 'http://doi.org/10.3390/s22103855', event.ctrlKey)\"\n     class=\"bibbase doi link\">\n    <span>doi</span></a>\n  &nbsp;\n  \n\n  \n  <a href=\"//bibbase.org/network/publication/stolze-gurnik-koddenberg-krger-khler-vil-militz-nondestructiveevaluationofthecuttingsurfaceofhardwoodfingerjoints-2022\"\n     class=\"bibbase bibbase_page link\">link</a>\n  &nbsp;\n  \n\n  <a href=\"#\"\n     onclick=\"showBib(event); return false;\"\n     class=\"bibbase bibtex link\">bibtex\n    <i class=\"fa fa-caret-down\"></i></a>\n\n  \n  &nbsp;\n  <a class=\"bibbase_abstract_link bibbase link\"\n     href=\"#\"\n     onclick=\"showAbstract(event); return false;\">\n    abstract <i class=\"fa fa-caret-down\"></i></a>\n  \n\n  \n\n  <!-- <a class=\"bibbase read link hidden\" -->\n  <!--    href=\"javascript:toggleRead('stolze-gurnik-koddenberg-krger-khler-vil-militz-nondestructiveevaluationofthecuttingsurfaceofhardwoodfingerjoints-2022')\" -->\n  <!--    title=\"Marking this paper as read adds it to your library on BibBase.\" -->\n  <!--    > -->\n  <!--   <i class=\"fa fa-check\"></i>&nbsp; -->\n  <!--   <span>mark as read</span> -->\n  <!-- </a> -->\n\n  &nbsp;\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n\n</span>\n\n<div class=\"well well-small bibbase\" data-type=\"bibtex\"\n     style=\"display:none\">\n  <pre style=\"white-space: pre-wrap;\">@article{stolze_non-destructive_2022,\n\ttitle = {Non-{Destructive} {Evaluation} of the {Cutting} {Surface} of {Hardwood} {Finger} {Joints}},\n\tvolume = {22},\n\tcopyright = {http://creativecommons.org/licenses/by/3.0/},\n\tissn = {1424-8220},\n\turl = {https://www.mdpi.com/1424-8220/22/10/3855},\n\tdoi = {10.3390/s22103855},\n\tabstract = {In this study, the surface parameters wettability, roughness, and adhesive penetration, which are important for wood bonding, were investigated and evaluated utilizing non-destructive methods after different mechanical processing. For this purpose, beech and birch finger joints were prepared with different cutting combinations (three cutters with different sharpness levels and two feed rates) in an industrial process. Effects and interactions on the surface parameters resulting from the different cutting combinations were evaluated using three Full Factorial Designs. The various cutting parameters had a predominantly significant influence on the surface parameters. The effects and identified interactions highlight the complexity of the cutting surface and the importance of wood bonding. In this respect, a new finding is that with sharper cutters, higher contact angles of the adhesives occur. The methods (contact angle measurement, laser scanning microscopy, and brightfield microscopy) used were well suited to make effects visible and quantifiable, which can be of interest for the quality control of the wood processing industry. The results can help to better understand and evaluate the design of wood surfaces via machining and the bonding of hardwoods. Possibly the results can contribute to further standardizing the production of load-bearing hardwood finger joints and making them more efficient.},\n\tlanguage = {en},\n\tnumber = {10},\n\turldate = {2022-05-19},\n\tjournal = {Sensors},\n\tauthor = {Stolze, Hannes and Gurnik, Michael and Koddenberg, Tim and Kröger, Jonas and Köhler, Robert and Viöl, Wolfgang and Militz, Holger},\n\tmonth = jan,\n\tyear = {2022},\n\tnote = {Number: 10\nPublisher: Multidisciplinary Digital Publishing Institute},\n\tkeywords = {wettability, hardwood, roughness, non-destructive evaluation, adhesive penetration, cutting surface, finger-jointing, wood characterization},\n\tpages = {3855},\n\tfile = {Full Text PDF:C\\:\\\\Users\\\\maicher\\\\Zotero\\\\storage\\\\H4WWF56G\\\\Stolze et al. - 2022 - Non-Destructive Evaluation of the Cutting Surface .pdf:application/pdf;sensors-22-03855.pdf:C\\:\\\\Users\\\\maicher\\\\Zotero\\\\storage\\\\J6S2BUM3\\\\sensors-22-03855.pdf:application/pdf},\n}\n\n</pre>\n</div>\n\n\n<div class=\"well well-small bibbase\" data-type=\"abstract\"\n     style=\"display:none\">\n  In this study, the surface parameters wettability, roughness, and adhesive penetration, which are important for wood bonding, were investigated and evaluated utilizing non-destructive methods after different mechanical processing. For this purpose, beech and birch finger joints were prepared with different cutting combinations (three cutters with different sharpness levels and two feed rates) in an industrial process. Effects and interactions on the surface parameters resulting from the different cutting combinations were evaluated using three Full Factorial Designs. The various cutting parameters had a predominantly significant influence on the surface parameters. The effects and identified interactions highlight the complexity of the cutting surface and the importance of wood bonding. In this respect, a new finding is that with sharper cutters, higher contact angles of the adhesives occur. The methods (contact angle measurement, laser scanning microscopy, and brightfield microscopy) used were well suited to make effects visible and quantifiable, which can be of interest for the quality control of the wood processing industry. The results can help to better understand and evaluate the design of wood surfaces via machining and the bonding of hardwoods. Possibly the results can contribute to further standardizing the production of load-bearing hardwood finger joints and making them more efficient.\n</div>\n\n\n</div>\n\n\n  <div class=\"bibbase_paper\" id=\"alade-naghizadeh-wessels-stolze-militz-characterizingsurfaceadhesionrelatedchemicalpropertiesofcopperazoleanddisodiumoctaboratetetrahydrateimpregnatedeucalyptusgrandiswood-2022\">\n  <span class=\"bibbase_paper_titleauthoryear\">\n\n  \n  <span class=\"bibbase_paper_title\">\n  \n  \n  \n  <a href=\"https://doi.org/10.1080/01694243.2022.2125208\"\n     onclick=\"return trackOutboundLink('publications', 'click', 'alade-naghizadeh-wessels-stolze-militz-characterizingsurfaceadhesionrelatedchemicalpropertiesofcopperazoleanddisodiumoctaboratetetrahydrateimpregnatedeucalyptusgrandiswood-2022', 'https://doi.org/10.1080/01694243.2022.2125208', event);\">\n    Characterizing surface adhesion-related chemical properties of copper azole and disodium octaborate tetrahydrate-impregnated Eucalyptus grandis wood.\n  </a>\n  \n  \n  \n</span>\n\n  <span class=\"bibbase_paper_author\">\n  Alade, A. A.; Naghizadeh, Z.; Wessels, C. B.; <a class=\"bibbase author link\" href=\"https://uni-goettingen.de/de/655065.html\">Stolze, H.</a>;  and Militz, H.\n</span>\n\n  \n\n</span>\n\n  <i>Journal of Adhesion Science and Technology</i>, 0(0): 1–24. September 2022.\n  <span class=\"note\">Publisher: Taylor & Francis _eprint: https://doi.org/10.1080/01694243.2022.2125208</span>\n\n<span class=\"bibbase_note\"></span>\n\n<br class=\"bibbase_paper_content\"/>\n\n<span class=\"bibbase_paper_content dontprint\">\n\n  \n  <a href=\"https://doi.org/10.1080/01694243.2022.2125208\"\n     onclick=\"log_download('alade-naghizadeh-wessels-stolze-militz-characterizingsurfaceadhesionrelatedchemicalpropertiesofcopperazoleanddisodiumoctaboratetetrahydrateimpregnatedeucalyptusgrandiswood-2022', 'https://doi.org/10.1080/01694243.2022.2125208', event.ctrlKey, event)\">\n    <img src=\"//bibbase.org/img/filetypes/link.svg\"\n\t     alt=\"Characterizing surface adhesion-related chemical properties of copper azole and disodium octaborate tetrahydrate-impregnated Eucalyptus grandis wood [link]\"\n       title=\"Paper\"\n\t     class=\"bibbase_icon\"\n         ><span class=\"bibbase_icon_text\">Paper</span></a>\n  &nbsp;\n  \n\n  \n  <a href=\"http://doi.org/10.1080/01694243.2022.2125208\"\n     onclick=\"log_download('alade-naghizadeh-wessels-stolze-militz-characterizingsurfaceadhesionrelatedchemicalpropertiesofcopperazoleanddisodiumoctaboratetetrahydrateimpregnatedeucalyptusgrandiswood-2022', 'http://doi.org/10.1080/01694243.2022.2125208', event.ctrlKey)\"\n     class=\"bibbase doi link\">\n    <span>doi</span></a>\n  &nbsp;\n  \n\n  \n  <a href=\"//bibbase.org/network/publication/alade-naghizadeh-wessels-stolze-militz-characterizingsurfaceadhesionrelatedchemicalpropertiesofcopperazoleanddisodiumoctaboratetetrahydrateimpregnatedeucalyptusgrandiswood-2022\"\n     class=\"bibbase bibbase_page link\">link</a>\n  &nbsp;\n  \n\n  <a href=\"#\"\n     onclick=\"showBib(event); return false;\"\n     class=\"bibbase bibtex link\">bibtex\n    <i class=\"fa fa-caret-down\"></i></a>\n\n  \n  &nbsp;\n  <a class=\"bibbase_abstract_link bibbase link\"\n     href=\"#\"\n     onclick=\"showAbstract(event); return false;\">\n    abstract <i class=\"fa fa-caret-down\"></i></a>\n  \n\n  \n\n  <!-- <a class=\"bibbase read link hidden\" -->\n  <!--    href=\"javascript:toggleRead('alade-naghizadeh-wessels-stolze-militz-characterizingsurfaceadhesionrelatedchemicalpropertiesofcopperazoleanddisodiumoctaboratetetrahydrateimpregnatedeucalyptusgrandiswood-2022')\" -->\n  <!--    title=\"Marking this paper as read adds it to your library on BibBase.\" -->\n  <!--    > -->\n  <!--   <i class=\"fa fa-check\"></i>&nbsp; -->\n  <!--   <span>mark as read</span> -->\n  <!-- </a> -->\n\n  &nbsp;\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n\n</span>\n\n<div class=\"well well-small bibbase\" data-type=\"bibtex\"\n     style=\"display:none\">\n  <pre style=\"white-space: pre-wrap;\">@article{alade_characterizing_2022,\n\ttitle = {Characterizing surface adhesion-related chemical properties of copper azole and disodium octaborate tetrahydrate-impregnated {Eucalyptus} grandis wood},\n\tvolume = {0},\n\tissn = {0169-4243},\n\turl = {https://doi.org/10.1080/01694243.2022.2125208},\n\tdoi = {10.1080/01694243.2022.2125208},\n\tabstract = {In-depth knowledge of the interaction effects of wood and preservative chemicals on surface adhesion characteristics is crucial for developing pathways to improve the adhesive bonding of treated woods. Therefore, this study investigated fundamental changes in the surface adhesion-related chemical characteristics of E. grandis sapwood and heartwood impregnated with copper azole (CA) and disodium octaborate tetrahydrate (DOT) wood preservatives. The characterization techniques employed include scanning electron microscopy integrated with energy-dispersive X-ray spectroscopy and Fourier transformed infrared spectroscopy. The results obtained revealed that CA and DOT impregnations significantly altered the acidity and reduced the polar functional groups on E. grandis sapwood and heartwood surfaces. The effect was more pronounced with DOT impregnation and on the sapwood. The observed modifications signal that the CA- and DOT-treated wood adhesion could be inhibited due to reduced opportunity for chemical bonding between the treated wood and adhesive molecules. Furthermore, there is a high likelihood of the hindrance of adhesion via mechanical interlocking as a result of chemical deposits, particularly in copper azole-impregnated wood. Considering the observed changes in the surface chemical characteristics of the CA and DOT-impregnated E. grandis, adhesive compatibility and adapting bonding parameters, such as assembly time and bonding pressure could be vital in ensuring adequate bonding of the treated E. grandis wood.},\n\tnumber = {0},\n\turldate = {2022-09-26},\n\tjournal = {Journal of Adhesion Science and Technology},\n\tauthor = {Alade, Adefemi Adebisi and Naghizadeh, Zahra and Wessels, Coenraad Brand and Stolze, Hannes and Militz, Holger},\n\tmonth = sep,\n\tyear = {2022},\n\tnote = {Publisher: Taylor \\&amp; Francis\n\\_eprint: https://doi.org/10.1080/01694243.2022.2125208},\n\tkeywords = {adhesion, FTIR, Eucalyptus grandis, Wood preservation, SEM-EDS, surface modification},\n\tpages = {1--24},\n}\n\n</pre>\n</div>\n\n\n<div class=\"well well-small bibbase\" data-type=\"abstract\"\n     style=\"display:none\">\n  In-depth knowledge of the interaction effects of wood and preservative chemicals on surface adhesion characteristics is crucial for developing pathways to improve the adhesive bonding of treated woods. Therefore, this study investigated fundamental changes in the surface adhesion-related chemical characteristics of E. grandis sapwood and heartwood impregnated with copper azole (CA) and disodium octaborate tetrahydrate (DOT) wood preservatives. The characterization techniques employed include scanning electron microscopy integrated with energy-dispersive X-ray spectroscopy and Fourier transformed infrared spectroscopy. The results obtained revealed that CA and DOT impregnations significantly altered the acidity and reduced the polar functional groups on E. grandis sapwood and heartwood surfaces. The effect was more pronounced with DOT impregnation and on the sapwood. The observed modifications signal that the CA- and DOT-treated wood adhesion could be inhibited due to reduced opportunity for chemical bonding between the treated wood and adhesive molecules. Furthermore, there is a high likelihood of the hindrance of adhesion via mechanical interlocking as a result of chemical deposits, particularly in copper azole-impregnated wood. Considering the observed changes in the surface chemical characteristics of the CA and DOT-impregnated E. grandis, adhesive compatibility and adapting bonding parameters, such as assembly time and bonding pressure could be vital in ensuring adequate bonding of the treated E. grandis wood.\n</div>\n\n\n</div>\n\n\n  <div class=\"bibbase_paper\" id=\"stolze-trautwein-mayer-theis-bollmus-militz-selflockingoffingerjointsinfluenceofdensityandmoisturecontent-2022\">\n  <span class=\"bibbase_paper_titleauthoryear\">\n\n  \n  <span class=\"bibbase_paper_title\">\n  \n  \n  \n  Self-locking of finger joints - Influence of density and moisture content.\n  \n  \n  \n</span>\n\n  <span class=\"bibbase_paper_author\">\n  <a class=\"bibbase author link\" href=\"https://uni-goettingen.de/de/655065.html\">Stolze, H.</a>; Trautwein, J.; Mayer, A. K.; Theis, V.; Bollmus, S.;  and Militz, H.\n</span>\n\n  \n\n</span>\n\n  In <i>Hardwood Conference Proceedings</i>, pages 317–323, Sopron, Hungary,  2022. University of Sopron Press\n  <span class=\"note\"></span>\n\n<span class=\"bibbase_note\"></span>\n\n<br class=\"bibbase_paper_content\"/>\n\n<span class=\"bibbase_paper_content dontprint\">\n\n  \n\n  \n\n  \n  <a href=\"//bibbase.org/network/publication/stolze-trautwein-mayer-theis-bollmus-militz-selflockingoffingerjointsinfluenceofdensityandmoisturecontent-2022\"\n     class=\"bibbase bibbase_page link\">link</a>\n  &nbsp;\n  \n\n  <a href=\"#\"\n     onclick=\"showBib(event); return false;\"\n     class=\"bibbase bibtex link\">bibtex\n    <i class=\"fa fa-caret-down\"></i></a>\n\n  \n\n  \n\n  <!-- <a class=\"bibbase read link hidden\" -->\n  <!--    href=\"javascript:toggleRead('stolze-trautwein-mayer-theis-bollmus-militz-selflockingoffingerjointsinfluenceofdensityandmoisturecontent-2022')\" -->\n  <!--    title=\"Marking this paper as read adds it to your library on BibBase.\" -->\n  <!--    > -->\n  <!--   <i class=\"fa fa-check\"></i>&nbsp; -->\n  <!--   <span>mark as read</span> -->\n  <!-- </a> -->\n\n  &nbsp;\n  \n  \n\n</span>\n\n<div class=\"well well-small bibbase\" data-type=\"bibtex\"\n     style=\"display:none\">\n  <pre style=\"white-space: pre-wrap;\">@inproceedings{stolze_self-locking_2022,\n\taddress = {Sopron, Hungary},\n\ttitle = {Self-locking of finger joints - {Influence} of density and moisture content},\n\tisbn = {978-963-334-446-0},\n\tlanguage = {EN},\n\tbooktitle = {Hardwood {Conference} {Proceedings}},\n\tpublisher = {University of Sopron Press},\n\tauthor = {Stolze, Hannes and Trautwein, Jan-Frederik and Mayer, Aaron Kilan and Theis, Viorica and Bollmus, Susanne and Militz, Holger},\n\tyear = {2022},\n\tpages = {317--323},\n}\n\n</pre>\n</div>\n\n\n\n</div>\n\n\n\n\n\n    </div>\n  </div>\n\n  <div class=\"bibbase_group_whole\" id=\"group_2021\">\n    <div class=\"bibbase_group\"\n      onclick=\"toggleGroup('group_2021')\"\n      onkeypress=\"toggleGroup('group_2021')\"\n      tabindex=\"0\">\n      <i class=\"fa fa-angle-down bibbase_group_head_icon\"></i>&nbsp;\n      <span>2021</span>\n      <span class=\"bibbase_group_count\">\n        \n        (2)\n        \n      </span>\n    </div>\n    <div class=\"bibbase_group_body\">\n      \n  \n  <div class=\"bibbase_paper\" id=\"stolze-schuh-kegel-frktterziegenbein-brischke-militz-monitoringofbeechgluedlaminatedtimberanddelaminationresistanceofbeechfingerjointsinvaryingambientclimates-2021\">\n  <span class=\"bibbase_paper_titleauthoryear\">\n\n  \n  <span class=\"bibbase_paper_title\">\n  \n  \n  \n  <a href=\"https://www.mdpi.com/1999-4907/12/12/1672\"\n     onclick=\"return trackOutboundLink('publications', 'click', 'stolze-schuh-kegel-frktterziegenbein-brischke-militz-monitoringofbeechgluedlaminatedtimberanddelaminationresistanceofbeechfingerjointsinvaryingambientclimates-2021', 'https://www.mdpi.com/1999-4907/12/12/1672', event);\">\n    Monitoring of Beech Glued Laminated Timber and Delamination Resistance of Beech Finger-Joints in Varying Ambient Climates.\n  </a>\n  \n  \n  \n</span>\n\n  <span class=\"bibbase_paper_author\">\n  <a class=\"bibbase author link\" href=\"https://uni-goettingen.de/de/655065.html\">Stolze, H.</a>; Schuh, M.; Kegel, S.; Fürkötter-Ziegenbein, C.; Brischke, C.;  and Militz, H.\n</span>\n\n  \n\n</span>\n\n  <i>Forests</i>, 12(12): 1672. December 2021.\n  <span class=\"note\">Number: 12 Publisher: Multidisciplinary Digital Publishing Institute</span>\n\n<span class=\"bibbase_note\"></span>\n\n<br class=\"bibbase_paper_content\"/>\n\n<span class=\"bibbase_paper_content dontprint\">\n\n  \n  <a href=\"https://www.mdpi.com/1999-4907/12/12/1672\"\n     onclick=\"log_download('stolze-schuh-kegel-frktterziegenbein-brischke-militz-monitoringofbeechgluedlaminatedtimberanddelaminationresistanceofbeechfingerjointsinvaryingambientclimates-2021', 'https://www.mdpi.com/1999-4907/12/12/1672', event.ctrlKey, event)\">\n    <img src=\"//bibbase.org/img/filetypes/link.svg\"\n\t     alt=\"Monitoring of Beech Glued Laminated Timber and Delamination Resistance of Beech Finger-Joints in Varying Ambient Climates [link]\"\n       title=\"Paper\"\n\t     class=\"bibbase_icon\"\n         ><span class=\"bibbase_icon_text\">Paper</span></a>\n  &nbsp;\n  \n\n  \n  <a href=\"http://doi.org/10.3390/f12121672\"\n     onclick=\"log_download('stolze-schuh-kegel-frktterziegenbein-brischke-militz-monitoringofbeechgluedlaminatedtimberanddelaminationresistanceofbeechfingerjointsinvaryingambientclimates-2021', 'http://doi.org/10.3390/f12121672', event.ctrlKey)\"\n     class=\"bibbase doi link\">\n    <span>doi</span></a>\n  &nbsp;\n  \n\n  \n  <a href=\"//bibbase.org/network/publication/stolze-schuh-kegel-frktterziegenbein-brischke-militz-monitoringofbeechgluedlaminatedtimberanddelaminationresistanceofbeechfingerjointsinvaryingambientclimates-2021\"\n     class=\"bibbase bibbase_page link\">link</a>\n  &nbsp;\n  \n\n  <a href=\"#\"\n     onclick=\"showBib(event); return false;\"\n     class=\"bibbase bibtex link\">bibtex\n    <i class=\"fa fa-caret-down\"></i></a>\n\n  \n  &nbsp;\n  <a class=\"bibbase_abstract_link bibbase link\"\n     href=\"#\"\n     onclick=\"showAbstract(event); return false;\">\n    abstract <i class=\"fa fa-caret-down\"></i></a>\n  \n\n  \n\n  <!-- <a class=\"bibbase read link hidden\" -->\n  <!--    href=\"javascript:toggleRead('stolze-schuh-kegel-frktterziegenbein-brischke-militz-monitoringofbeechgluedlaminatedtimberanddelaminationresistanceofbeechfingerjointsinvaryingambientclimates-2021')\" -->\n  <!--    title=\"Marking this paper as read adds it to your library on BibBase.\" -->\n  <!--    > -->\n  <!--   <i class=\"fa fa-check\"></i>&nbsp; -->\n  <!--   <span>mark as read</span> -->\n  <!-- </a> -->\n\n  &nbsp;\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n\n</span>\n\n<div class=\"well well-small bibbase\" data-type=\"bibtex\"\n     style=\"display:none\">\n  <pre style=\"white-space: pre-wrap;\">@article{stolze_monitoring_2021,\n\ttitle = {Monitoring of {Beech} {Glued} {Laminated} {Timber} and {Delamination} {Resistance} of {Beech} {Finger}-{Joints} in {Varying} {Ambient} {Climates}},\n\tvolume = {12},\n\tcopyright = {http://creativecommons.org/licenses/by/3.0/},\n\turl = {https://www.mdpi.com/1999-4907/12/12/1672},\n\tdoi = {10.3390/f12121672},\n\tabstract = {In this study, varying ambient climates were simulated in a test building by changing temperature and relative humidity. Beech glued laminated timber (glulam, Fagus sylvatica, L.) was freshly installed in the test building and monitoring of the change in wood moisture content of the glulam resulting from the variations in climate was carried out. Subsequently, finger-jointed beech specimens were exposed to the variations in relative humidity measured in the course of the monitoring experiment on a laboratory scale, and thus an alternating climate regime was derived from the conditions in the test building. Its influence on the delamination of the finger-joints was evaluated. In addition, it was examined whether beech finger-joints using commercial adhesive systems fulfil the normative requirements for delamination resistance according to EN 301 (2018) and whether different bonding-wood moisture levels have an effect on the delamination of the finger-joints. In the context of the monitoring experiment, there was a clear moisture gradient in the beech glulam between the inner and near-surface wood. The applied adhesive systems showed almost the same delamination resistance after variation of relative humidity. The normative requirements were met by all PRF-bonded and by most PUR-bonded beech finger-joints with higher bonding wood moisture content.},\n\tlanguage = {en},\n\tnumber = {12},\n\turldate = {2022-01-17},\n\tjournal = {Forests},\n\tauthor = {Stolze, Hannes and Schuh, Mathias and Kegel, Sebastian and Fürkötter-Ziegenbein, Connor and Brischke, Christian and Militz, Holger},\n\tmonth = dec,\n\tyear = {2021},\n\tnote = {Number: 12\nPublisher: Multidisciplinary Digital Publishing Institute},\n\tkeywords = {adhesives, delamination, beech glulam, finger-joint bonding, monitoring experiment},\n\tpages = {1672},\n\tfile = {Full Text PDF:C\\:\\\\Users\\\\maicher\\\\Zotero\\\\storage\\\\PTR39CZS\\\\Stolze et al. - 2021 - Monitoring of Beech Glued Laminated Timber and Del.pdf:application/pdf;Snapshot:C\\:\\\\Users\\\\maicher\\\\Zotero\\\\storage\\\\8BNTBW9V\\\\1672.html:text/html},\n}\n\n</pre>\n</div>\n\n\n<div class=\"well well-small bibbase\" data-type=\"abstract\"\n     style=\"display:none\">\n  In this study, varying ambient climates were simulated in a test building by changing temperature and relative humidity. Beech glued laminated timber (glulam, Fagus sylvatica, L.) was freshly installed in the test building and monitoring of the change in wood moisture content of the glulam resulting from the variations in climate was carried out. Subsequently, finger-jointed beech specimens were exposed to the variations in relative humidity measured in the course of the monitoring experiment on a laboratory scale, and thus an alternating climate regime was derived from the conditions in the test building. Its influence on the delamination of the finger-joints was evaluated. In addition, it was examined whether beech finger-joints using commercial adhesive systems fulfil the normative requirements for delamination resistance according to EN 301 (2018) and whether different bonding-wood moisture levels have an effect on the delamination of the finger-joints. In the context of the monitoring experiment, there was a clear moisture gradient in the beech glulam between the inner and near-surface wood. The applied adhesive systems showed almost the same delamination resistance after variation of relative humidity. The normative requirements were met by all PRF-bonded and by most PUR-bonded beech finger-joints with higher bonding wood moisture content.\n</div>\n\n\n</div>\n\n\n  <div class=\"bibbase_paper\" id=\"alade-naghizadeh-wessels-stolze-militz-compatibilityofpreservativewithadhesiveineucalyptusgrandislaminates-2021\">\n  <span class=\"bibbase_paper_titleauthoryear\">\n\n  \n  <span class=\"bibbase_paper_title\">\n  \n  \n  \n  <a href=\"https://doi.org/10.1080/20426445.2021.2018101\"\n     onclick=\"return trackOutboundLink('publications', 'click', 'alade-naghizadeh-wessels-stolze-militz-compatibilityofpreservativewithadhesiveineucalyptusgrandislaminates-2021', 'https://doi.org/10.1080/20426445.2021.2018101', event);\">\n    Compatibility of preservative with adhesive in Eucalyptus grandis laminates.\n  </a>\n  \n  \n  \n</span>\n\n  <span class=\"bibbase_paper_author\">\n  Alade, A. A.; Naghizadeh, Z.; Wessels, C. B.; <a class=\"bibbase author link\" href=\"https://uni-goettingen.de/de/655065.html\">Stolze, H.</a>;  and Militz, H.\n</span>\n\n  \n\n</span>\n\n  <i>International Wood Products Journal</i>, 13(1): 57–69. December 2021.\n  <span class=\"note\">Publisher: Taylor & Francis _eprint: https://doi.org/10.1080/20426445.2021.2018101</span>\n\n<span class=\"bibbase_note\"></span>\n\n<br class=\"bibbase_paper_content\"/>\n\n<span class=\"bibbase_paper_content dontprint\">\n\n  \n  <a href=\"https://doi.org/10.1080/20426445.2021.2018101\"\n     onclick=\"log_download('alade-naghizadeh-wessels-stolze-militz-compatibilityofpreservativewithadhesiveineucalyptusgrandislaminates-2021', 'https://doi.org/10.1080/20426445.2021.2018101', event.ctrlKey, event)\">\n    <img src=\"//bibbase.org/img/filetypes/link.svg\"\n\t     alt=\"Compatibility of preservative with adhesive in Eucalyptus grandis laminates [link]\"\n       title=\"Paper\"\n\t     class=\"bibbase_icon\"\n         ><span class=\"bibbase_icon_text\">Paper</span></a>\n  &nbsp;\n  \n\n  \n  <a href=\"http://doi.org/10.1080/20426445.2021.2018101\"\n     onclick=\"log_download('alade-naghizadeh-wessels-stolze-militz-compatibilityofpreservativewithadhesiveineucalyptusgrandislaminates-2021', 'http://doi.org/10.1080/20426445.2021.2018101', event.ctrlKey)\"\n     class=\"bibbase doi link\">\n    <span>doi</span></a>\n  &nbsp;\n  \n\n  \n  <a href=\"//bibbase.org/network/publication/alade-naghizadeh-wessels-stolze-militz-compatibilityofpreservativewithadhesiveineucalyptusgrandislaminates-2021\"\n     class=\"bibbase bibbase_page link\">link</a>\n  &nbsp;\n  \n\n  <a href=\"#\"\n     onclick=\"showBib(event); return false;\"\n     class=\"bibbase bibtex link\">bibtex\n    <i class=\"fa fa-caret-down\"></i></a>\n\n  \n  &nbsp;\n  <a class=\"bibbase_abstract_link bibbase link\"\n     href=\"#\"\n     onclick=\"showAbstract(event); return false;\">\n    abstract <i class=\"fa fa-caret-down\"></i></a>\n  \n\n  \n\n  <!-- <a class=\"bibbase read link hidden\" -->\n  <!--    href=\"javascript:toggleRead('alade-naghizadeh-wessels-stolze-militz-compatibilityofpreservativewithadhesiveineucalyptusgrandislaminates-2021')\" -->\n  <!--    title=\"Marking this paper as read adds it to your library on BibBase.\" -->\n  <!--    > -->\n  <!--   <i class=\"fa fa-check\"></i>&nbsp; -->\n  <!--   <span>mark as read</span> -->\n  <!-- </a> -->\n\n  &nbsp;\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n\n</span>\n\n<div class=\"well well-small bibbase\" data-type=\"bibtex\"\n     style=\"display:none\">\n  <pre style=\"white-space: pre-wrap;\">@article{alade_compatibility_2021,\n\ttitle = {Compatibility of preservative with adhesive in {Eucalyptus} grandis laminates},\n\tvolume = {13},\n\tissn = {2042-6445},\n\turl = {https://doi.org/10.1080/20426445.2021.2018101},\n\tdoi = {10.1080/20426445.2021.2018101},\n\tabstract = {The fundamental factors responsible for the complexities in adhesive bonding of preservative-treated wood are predominantly wood species, preservative composition, and adhesive system. It is post-effect of these factors that process variables such as assembly times and bonding pressure exert secondary influences on adhesive-bond development in preservative-treated laminates. Hence, this study investigated the effect of copper azole (CA) and disodium octaborate tetrahydrate (DOT) impregnations on E. grandis heartwood (HW) and sapwood (SW) bonding with melamine–urea–formaldehyde and polyurethane adhesives. Based on the adhesives and bonding conditions investigated, the CA and DOT-treated E. grandis laminates do not satisfy at least one of the shear strength and delamination requirements according to EN 14080:2013. Contrary to delamination, shear strength was significantly affected by the HW–SW difference. This study established the basis for further considerations on adapting bonding conditions for improved adhesive-bond performance in CA and DOT-treated E. grandis laminates towards manufacturing durable hardwood composite for tropical and subtropical environments.},\n\tnumber = {1},\n\turldate = {2021-12-23},\n\tjournal = {International Wood Products Journal},\n\tauthor = {Alade, Adefemi Adebisi and Naghizadeh, Zahra and Wessels, Coenraad Brand and Stolze, Hannes and Militz, Holger},\n\tmonth = dec,\n\tyear = {2021},\n\tnote = {Publisher: Taylor \\&amp; Francis\n\\_eprint: https://doi.org/10.1080/20426445.2021.2018101},\n\tkeywords = {adhesion, wood composites, E. grandis, hardwood bonding, Wood durability treatment},\n\tpages = {57--69},\n\tfile = {Alade et al. - 2021 - Compatibility of preservative with adhesive in Euc.pdf:C\\:\\\\Users\\\\maicher\\\\Zotero\\\\storage\\\\XFVIY46R\\\\Alade et al. - 2021 - Compatibility of preservative with adhesive in Euc.pdf:application/pdf},\n}\n\n</pre>\n</div>\n\n\n<div class=\"well well-small bibbase\" data-type=\"abstract\"\n     style=\"display:none\">\n  The fundamental factors responsible for the complexities in adhesive bonding of preservative-treated wood are predominantly wood species, preservative composition, and adhesive system. It is post-effect of these factors that process variables such as assembly times and bonding pressure exert secondary influences on adhesive-bond development in preservative-treated laminates. Hence, this study investigated the effect of copper azole (CA) and disodium octaborate tetrahydrate (DOT) impregnations on E. grandis heartwood (HW) and sapwood (SW) bonding with melamine–urea–formaldehyde and polyurethane adhesives. Based on the adhesives and bonding conditions investigated, the CA and DOT-treated E. grandis laminates do not satisfy at least one of the shear strength and delamination requirements according to EN 14080:2013. Contrary to delamination, shear strength was significantly affected by the HW–SW difference. This study established the basis for further considerations on adapting bonding conditions for improved adhesive-bond performance in CA and DOT-treated E. grandis laminates towards manufacturing durable hardwood composite for tropical and subtropical environments.\n</div>\n\n\n</div>\n\n\n\n\n\n    </div>\n  </div>\n\n  <div class=\"bibbase_group_whole\" id=\"group_2016\">\n    <div class=\"bibbase_group\"\n      onclick=\"toggleGroup('group_2016')\"\n      onkeypress=\"toggleGroup('group_2016')\"\n      tabindex=\"0\">\n      <i class=\"fa fa-angle-down bibbase_group_head_icon\"></i>&nbsp;\n      <span>2016</span>\n      <span class=\"bibbase_group_count\">\n        \n        (1)\n        \n      </span>\n    </div>\n    <div class=\"bibbase_group_body\">\n      \n  \n  <div class=\"bibbase_paper\" id=\"stolze-spezifischesortierungvonprfkrpernausbuchenundkiefernsplintholznachkriterienzurprfungvonelastomechanischeneigenschaftenspecificsortingofbeechandpinesapwoodaccordingtothecriteriafortestingtheelastomechanicalcharacteristics-2016\">\n  <span class=\"bibbase_paper_titleauthoryear\">\n\n  \n  <span class=\"bibbase_paper_title\">\n  \n  \n  \n  Spezifische Sortierung von Prüfkörpern aus Buchen- und Kiefernsplintholz nach Kriterien zur Prüfung von elasto-mechanischen Eigenschaften - Specific sorting of beech and pine sapwood according to the criteria for testing the elasto-mechanical characteristics.\n  \n  \n  \n</span>\n\n  <span class=\"bibbase_paper_author\">\n  <a class=\"bibbase author link\" href=\"https://uni-goettingen.de/de/655065.html\">Stolze, H.</a>\n</span>\n\n  \n\n</span>\n\n  Technical Report Georg-August-Universität Göttingen, Fakultät für Forstwissenschaften und Waldökologie, Abteilung Holzbiologie und Holzprodukte, Göttingen,  2016.\n  <span class=\"note\">1. Prüfer: Dr. Antje Gellerich 2. Prüfer: Prof. Dr. Holger Militz</span>\n\n<span class=\"bibbase_note\"></span>\n\n<br class=\"bibbase_paper_content\"/>\n\n<span class=\"bibbase_paper_content dontprint\">\n\n  \n\n  \n\n  \n  <a href=\"//bibbase.org/network/publication/stolze-spezifischesortierungvonprfkrpernausbuchenundkiefernsplintholznachkriterienzurprfungvonelastomechanischeneigenschaftenspecificsortingofbeechandpinesapwoodaccordingtothecriteriafortestingtheelastomechanicalcharacteristics-2016\"\n     class=\"bibbase bibbase_page link\">link</a>\n  &nbsp;\n  \n\n  <a href=\"#\"\n     onclick=\"showBib(event); return false;\"\n     class=\"bibbase bibtex link\">bibtex\n    <i class=\"fa fa-caret-down\"></i></a>\n\n  \n\n  \n\n  <!-- <a class=\"bibbase read link hidden\" -->\n  <!--    href=\"javascript:toggleRead('stolze-spezifischesortierungvonprfkrpernausbuchenundkiefernsplintholznachkriterienzurprfungvonelastomechanischeneigenschaftenspecificsortingofbeechandpinesapwoodaccordingtothecriteriafortestingtheelastomechanicalcharacteristics-2016')\" -->\n  <!--    title=\"Marking this paper as read adds it to your library on BibBase.\" -->\n  <!--    > -->\n  <!--   <i class=\"fa fa-check\"></i>&nbsp; -->\n  <!--   <span>mark as read</span> -->\n  <!-- </a> -->\n\n  &nbsp;\n  \n  \n\n</span>\n\n<div class=\"well well-small bibbase\" data-type=\"bibtex\"\n     style=\"display:none\">\n  <pre style=\"white-space: pre-wrap;\">@techreport{stolze_spezifische_2016,\n\taddress = {Göttingen},\n\ttype = {Bachelorarbeit},\n\ttitle = {Spezifische {Sortierung} von {Prüfkörpern} aus {Buchen}- und {Kiefernsplintholz} nach {Kriterien} zur {Prüfung} von elasto-mechanischen {Eigenschaften} - {Specific} sorting of beech and pine sapwood according to the criteria for testing the elasto-mechanical characteristics},\n\tlanguage = {deutsch},\n\tinstitution = {Georg-August-Universität Göttingen, Fakultät für Forstwissenschaften und Waldökologie, Abteilung Holzbiologie und Holzprodukte},\n\tauthor = {Stolze, Hannes},\n\tyear = {2016},\n\tnote = {1. Prüfer: Dr. Antje Gellerich\n2. Prüfer: Prof. Dr. Holger Militz},\n}\n</pre>\n</div>\n\n\n\n</div>\n\n\n\n\n\n    </div>\n  </div>\n\n\n\n\n  </div>\n\n\n  <!-- Modal -->\n\n  <!-- <iframe id=\"bibbase_network_frame\" -->\n  <!--         src=\"//bibbase.org/network/control\" -->\n  <!--         style=\"display: none;\"> -->\n  <!-- </iframe> -->\n\n</div>\n"}; document.write(bibbase_data.data);