BibBase https://bibbase.org/f/HnQC7A6C8WxhqExKR/MTE_Pusit

2022 (1)

Analysis and classification of abnormal vertebral column by convolutional neural network algorithm. Thongking, W.; Mitsomwang, P.; Sindhupakorn, B.; and Tathanuch, J. Suranaree Journal of Social Science, 16(1): 78–90. 2022.
link bibtex

@article{thongking2022analysis,
  title={Analysis and classification of abnormal vertebral column by convolutional neural network algorithm},
  author={Thongking, Witchuda and Mitsomwang, Pusit and Sindhupakorn, Bura and Tathanuch, Jessada},
  journal={Suranaree Journal of Social Science},
  volume={16},
  number={1},
  pages={78--90},
  year={2022}
}

2021 (4)

Damage of punch/die tools in steel wire rod shear cutting. Mitsomwang, P; Borrisutthekul, R; Kitkamthorn, U; Natpukkana, P; Panuwannakorn, R; and Khao-Phong, L Journal of Research and Applications in Mechanical Engineering, 9(2). 2021.
link bibtex

@article{mitsomwang2021damage,
  title={Damage of punch/die tools in steel wire rod shear cutting},
  author={Mitsomwang, P and Borrisutthekul, R and Kitkamthorn, U and Natpukkana, P and Panuwannakorn, R and Khao-Phong, L},
  journal={Journal of Research and Applications in Mechanical Engineering},
  volume={9},
  number={2},
  year={2021}
}

Influence of axial force and characteristics of axial force affecting on total knee replacement constraint test. Musikul, T.; Kitkamthorn, U.; Mitsomwang, P.; Sindhupakorn, B.; and Borrisutthekul, R. In IOP Conference Series: Materials Science and Engineering, volume 1137, pages 012041, 2021. IOP Publishing
link bibtex

@inproceedings{musikul2021influence,
  title={Influence of axial force and characteristics of axial force affecting on total knee replacement constraint test},
  author={Musikul, Tanapat and Kitkamthorn, Usanee and Mitsomwang, Pusit and Sindhupakorn, Bura and Borrisutthekul, Rattana},
  booktitle={IOP Conference Series: Materials Science and Engineering},
  volume={1137},
  number={1},
  pages={012041},
  year={2021},
  organization={IOP Publishing}
}

Fabrication of an acetone gas sensor based on Si-doped WO3 nanorods prepared by reactive magnetron co-sputtering with OAD technique. Sucharitakul, W.; Sukee, A.; Leuasoongnoen, P.; Horprathum, M.; Lertvanithphol, T.; Janphuang, P.; Mitsomwang, P.; and Sindhupakorn, B. Materials Research Express, 8(12): 125702. 2021.
link bibtex

@article{sucharitakul2021fabrication,
  title={Fabrication of an acetone gas sensor based on Si-doped WO3 nanorods prepared by reactive magnetron co-sputtering with OAD technique},
  author={Sucharitakul, Waraporn and Sukee, Anupong and Leuasoongnoen, Pimchanok and Horprathum, Mati and Lertvanithphol, Tossaporn and Janphuang, Pattanaphong and Mitsomwang, Pusit and Sindhupakorn, Bura},
  journal={Materials Research Express},
  volume={8},
  number={12},
  pages={125702},
  year={2021},
  publisher={IOP Publishing}
}

Steel fiber/polyethylene terephtalate composites. Duekhodthod, R.; Kitkamthorn, U.; Mitsomwang, P.; Intaing, T.; and Borrisutthekul, R. In IOP Conference Series: Materials Science and Engineering, volume 1137, pages 012026, 2021. IOP Publishing
link bibtex

@inproceedings{duekhodthod2021steel,
  title={Steel fiber/polyethylene terephtalate composites},
  author={Duekhodthod, Rossarin and Kitkamthorn, Usanee and Mitsomwang, Pusit and Intaing, Tawatchai and Borrisutthekul, Rattana},
  booktitle={IOP Conference Series: Materials Science and Engineering},
  volume={1137},
  number={1},
  pages={012026},
  year={2021},
  organization={IOP Publishing}
}

2019 (1)

Investigation of Structure and Tensile Properties of Betel Palm Sheath. Choonamchai, C; Panwised, D; Mitsomwang, P; and Borrisutthekul, R In IOP Conference Series: Materials Science and Engineering, volume 654, pages 012016, 2019. IOP Publishing
link bibtex

@inproceedings{choonamchai2019investigation,
  title={Investigation of Structure and Tensile Properties of Betel Palm Sheath},
  author={Choonamchai, C and Panwised, D and Mitsomwang, P and Borrisutthekul, R},
  booktitle={IOP Conference Series: Materials Science and Engineering},
  volume={654},
  number={1},
  pages={012016},
  year={2019},
  organization={IOP Publishing}
}

2018 (2)

Investigation of Notch Shear Cutting for JIS SCM420 Steel Wire Rod. Natpukkana, P; Pakinsee, S; Boonmapat, S; Mitsomwang, P; Borrisutthekul, R; Panuwannakorn, R; and Khoa-phong, L In IOP Conference Series: Materials Science and Engineering, volume 436, pages 012013, 2018. IOP Publishing
link bibtex

@inproceedings{natpukkana2018investigation,
  title={Investigation of Notch Shear Cutting for JIS SCM420 Steel Wire Rod},
  author={Natpukkana, P and Pakinsee, S and Boonmapat, S and Mitsomwang, P and Borrisutthekul, R and Panuwannakorn, R and Khoa-phong, L},
  booktitle={IOP Conference Series: Materials Science and Engineering},
  volume={436},
  number={1},
  pages={012013},
  year={2018},
  organization={IOP Publishing}
}

Investigation of Strain Hardening in Aluminum Alloy Sheared Sheet Based on Microhardness Measurement and FEM Analysis. Mitsomwang, P.; Borrisutthekul, R.; Kitkamthorn, U.; and Nagasawa, S. International Journal of Automation Technology, 12(5): 714–722. 2018.
link bibtex

@article{mitsomwang2018investigation,
  title={Investigation of Strain Hardening in Aluminum Alloy Sheared Sheet Based on Microhardness Measurement and FEM Analysis},
  author={Mitsomwang, Pusit and Borrisutthekul, Rattana and Kitkamthorn, Usanee and Nagasawa, Shigeru},
  journal={International Journal of Automation Technology},
  volume={12},
  number={5},
  pages={714--722},
  year={2018},
  publisher={Fuji Technology Press Ltd.}
}

2017 (4)

Investigation of Strain Hardening in Aluminum Alloy Sheared Sheet Based on Micro Hardness Measurement and Finite Element Analysis. MITSOMWANG, P.; BORRISUTTHEKUL, R.; KITKAMTHORN, U.; and NAGASAWA, S. In Proceedings of International Conference on Leading Edge Manufacturing in 21st century: LEM21 2017.9, pages 011, 2017. The Japan Society of Mechanical Engineers
link bibtex

@inproceedings{mitsomwang2017investigation,
  title={Investigation of Strain Hardening in Aluminum Alloy Sheared Sheet Based on Micro Hardness Measurement and Finite Element Analysis},
  author={MITSOMWANG, Pusit and BORRISUTTHEKUL, Rattana and KITKAMTHORN, Usanee and NAGASAWA, Shigeru},
  booktitle={Proceedings of International Conference on Leading Edge Manufacturing in 21st century: LEM21 2017.9},
  pages={011},
  year={2017},
  organization={The Japan Society of Mechanical Engineers}
}

Effects of blade tip geometry on cutting characteristics of lead alloy sheet subjected to wedge indentation. Mitsomwang, P.; Natpukkana, P.; Borrisutthekul, R.; and Nagasawa, S. Key Engineering Materials, 719: 137–141. 2017.
link bibtex

@article{mitsomwang2017effects,
  title={Effects of blade tip geometry on cutting characteristics of lead alloy sheet subjected to wedge indentation},
  author={Mitsomwang, Pusit and Natpukkana, Pirapa and Borrisutthekul, Rattana and Nagasawa, Shigeru},
  journal={Key Engineering Materials},
  volume={719},
  pages={137--141},
  year={2017},
  publisher={Trans Tech Publ}
}

Dissimilar materials laser welding between stainless steel 304 and thermoplastics. Borrisutthekul, R.; Saengsai, A.; and Mitsomwang, P. Key Engineering Materials, 719: 142–148. 2017.
link bibtex

@article{borrisutthekul2017dissimilar,
  title={Dissimilar materials laser welding between stainless steel 304 and thermoplastics},
  author={Borrisutthekul, Rattana and Saengsai, Anchalee and Mitsomwang, Pusit},
  journal={Key Engineering Materials},
  volume={719},
  pages={142--148},
  year={2017},
  publisher={Trans Tech Publ}
}

Experimental and Numerical Investigations of Applying Tip-bottomed Tool for Bending Advanced Ultra-high Strength Steel Sheet. Mitsomwang, P.; Borrisutthekul, R.; Klaiw-awoot, K.; and Pattalung, A. In IOP Conference Series: Materials Science and Engineering, volume 229, pages 012012, 2017. IOP Publishing
link bibtex

@inproceedings{mitsomwang2017experimental,
  title={Experimental and Numerical Investigations of Applying Tip-bottomed Tool for Bending Advanced Ultra-high Strength Steel Sheet},
  author={Mitsomwang, Pusit and Borrisutthekul, Rattana and Klaiw-awoot, Ken and Pattalung, Aran},
  booktitle={IOP Conference Series: Materials Science and Engineering},
  volume={229},
  number={1},
  pages={012012},
  year={2017},
  organization={IOP Publishing}
}

2016 (1)

Effect of cutter tip angle on cutting characteristics of acrylic worksheet subjected to punch/die shearing. Kojima, M.; Mitsomwang, P.; and Nagasawa, S. AIMS Mater Sci, 3: 1728–1747. 2016.
link bibtex

@article{kojima2016effect,
  title={Effect of cutter tip angle on cutting characteristics of acrylic worksheet subjected to punch/die shearing},
  author={Kojima, Masami and Mitsomwang, Pusit and Nagasawa, Shigeru},
  journal={AIMS Mater Sci},
  volume={3},
  pages={1728--1747},
  year={2016}
}

2015 (1)

Effects of shearing parameters on cutting characteristics of polycarbonate sheet subjected to straight punch/die shearing. Mitsomwang, P.; and Nagasawa, S. Journal of Materials Processing Technology, 220: 46–57. 2015.
link bibtex

@article{mitsomwang2015effects,
  title={Effects of shearing parameters on cutting characteristics of polycarbonate sheet subjected to straight punch/die shearing},
  author={Mitsomwang, Pusit and Nagasawa, Shigeru},
  journal={Journal of Materials Processing Technology},
  volume={220},
  pages={46--57},
  year={2015},
  publisher={Elsevier}
}

2014 (4)

Effect of Tool Conditions on Cutting Characteristics of Resin and Paper Fiber Based Sheet Materials Subjected to Straight Shearing Tool Indentation. MITSOMWANG, P. . 2014.
link bibtex

@article{mitsomwang2014effect,
  title={Effect of Tool Conditions on Cutting Characteristics of Resin and Paper Fiber Based Sheet Materials Subjected to Straight Shearing Tool Indentation},
  author={MITSOMWANG, PUSIT},
  year={2014},
  publisher={長岡技術科学大学}
}

Effect of mechanical conditions on cutting characteristics of polycarbonate sheet subjected to straight punch/die shearing. Mitsomwang, P.; and Nagasawa, S. Procedia Engineering, 81: 1145–1150. 2014.
link bibtex

@article{mitsomwang2014effect,
  title={Effect of mechanical conditions on cutting characteristics of polycarbonate sheet subjected to straight punch/die shearing},
  author={Mitsomwang, Pusit and Nagasawa, Shigeru},
  journal={Procedia Engineering},
  volume={81},
  pages={1145--1150},
  year={2014},
  publisher={Elsevier}
}

Deformation analysis of silicone rubber sheet subjected to keen WC blade indentation. Mitsomwang, P.; Nagasawa, S.; Kuroiwa, H.; and Fukushima, Y. International Journal of Automation Technology, 8(5): 761–772. 2014.
link bibtex

@article{mitsomwang2014deformation,
  title={Deformation analysis of silicone rubber sheet subjected to keen WC blade indentation},
  author={Mitsomwang, Pusit and Nagasawa, Shigeru and Kuroiwa, Hiroki and Fukushima, Yoshio},
  journal={International Journal of Automation Technology},
  volume={8},
  number={5},
  pages={761--772},
  year={2014},
  publisher={Fuji Technology Press Ltd.}
}

Cutting characteristics of white-coated paperboard subjected to straight punch/die shearing under overlapped clearance. Mitsomwang, P.; and Nagasawa, S. Journal of Advanced Mechanical Design, Systems, and Manufacturing, 8(3): JAMDSM0026–JAMDSM0026. 2014.
link bibtex

@article{mitsomwang2014cutting,
  title={Cutting characteristics of white-coated paperboard subjected to straight punch/die shearing under overlapped clearance},
  author={Mitsomwang, Pusit and Nagasawa, Shigeru},
  journal={Journal of Advanced Mechanical Design, Systems, and Manufacturing},
  volume={8},
  number={3},
  pages={JAMDSM0026--JAMDSM0026},
  year={2014},
  publisher={The Japan Society of Mechanical Engineers}
}

2013 (3)

Finite element analysis of corrugated board on rotary creasing process. Nagasawa, S.; Komiyama, Y.; and Mitsomwang, P. Journal of Advanced Mechanical Design, Systems, and Manufacturing, 7(2): 103–114. 2013.
link bibtex

@article{nagasawa2013finite,
  title={Finite element analysis of corrugated board on rotary creasing process},
  author={Nagasawa, Shigeru and Komiyama, Yuki and Mitsomwang, Pusit},
  journal={Journal of Advanced Mechanical Design, Systems, and Manufacturing},
  volume={7},
  number={2},
  pages={103--114},
  year={2013},
  publisher={The Japan Society of Mechanical Engineers}
}

D006 Investigation of Silicone Rubber's Cutting Characteristic during Keen WC Blades Indentation. MITSOMWANG, P.; NAGASAWA, S.; IGARASHI, Y.; KUROIWA, H.; FUKUSHIMA, Y.; and HORIBATA, H. In Proceedings of International Conference on Leading Edge Manufacturing in 21st century: LEM21 2013.7, pages 474–479, 2013. The Japan Society of Mechanical Engineers
link bibtex

@inproceedings{mitsomwang2013d006,
  title={D006 Investigation of Silicone Rubber's Cutting Characteristic during Keen WC Blades Indentation},
  author={MITSOMWANG, Pusit and NAGASAWA, Shigeru and IGARASHI, Yuichi and KUROIWA, Hiroki and FUKUSHIMA, Yoshio and HORIBATA, Hironori},
  booktitle={Proceedings of International Conference on Leading Edge Manufacturing in 21st century: LEM21 2013.7},
  pages={474--479},
  year={2013},
  organization={The Japan Society of Mechanical Engineers}
}

Cutting behavior of acrylic thick sheet subjected to squared punch shearing. Mitsomwang, P.; and Nagasawa, S. Journal of Chemistry and Chemical Engineering, 7(7): 653. 2013.
link bibtex

@article{mitsomwang2013cutting,
  title={Cutting behavior of acrylic thick sheet subjected to squared punch shearing},
  author={Mitsomwang, Pusit and Nagasawa, Shigeru},
  journal={Journal of Chemistry and Chemical Engineering},
  volume={7},
  number={7},
  pages={653},
  year={2013},
  publisher={David Publishing Company, Inc.}
}

2012 (4)

Effect of underlay stiffness on cutting profile of polycarbonate sheet during wedge indentation process. Mitsomwang, P.; Nagasawa, S.; Chaijit, S.; Fujikura, M.; and Mutoh, Y. Journal of Advanced Mechanical Design, Systems, and Manufacturing, 6(7): 1168–1179. 2012.
link bibtex

@article{mitsomwang2012effect,
  title={Effect of underlay stiffness on cutting profile of polycarbonate sheet during wedge indentation process},
  author={Mitsomwang, Pusit and Nagasawa, Shigeru and Chaijit, Seksan and Fujikura, Masatoshi and Mutoh, Yoshiharu},
  journal={Journal of Advanced Mechanical Design, Systems, and Manufacturing},
  volume={6},
  number={7},
  pages={1168--1179},
  year={2012},
  publisher={The Japan Society of Mechanical Engineers}
}

0907 Effects of Underlay Stiffness on Cutting Characteristics in Polycarbonate. Mitsomwang, P.; Shigeru, N.; and Yoshiharu, M. In The Proceedings of Conference of Hokuriku-Shinetsu Branch 2012.49, pages 090701–090702, 2012. The Japan Society of Mechanical Engineers
link bibtex

@inproceedings{mitsomwang20120907,
  title={0907 Effects of Underlay Stiffness on Cutting Characteristics in Polycarbonate},
  author={Mitsomwang, Pusit and Shigeru, Nagasawa and Yoshiharu, Mutoh},
  booktitle={The Proceedings of Conference of Hokuriku-Shinetsu Branch 2012.49},
  pages={090701--090702},
  year={2012},
  organization={The Japan Society of Mechanical Engineers}
}

An experimental behavior of acrylic worksheet subjected to squared punch shearing. MITSOMWANG, P 平 24 塑加春講論,135–136. 2012.
link bibtex

@article{mitsomwang2012experimental,
  title={An experimental behavior of acrylic worksheet subjected to squared punch shearing},
  author={MITSOMWANG, P},
  journal={平 24 塑加春講論},
  pages={135--136},
  year={2012}
}

Feasibility study of crack propagation in acrylic sheet subjected to shear cutting. Mitsomwang, P In Proceedings of 9th meeting, the Japan Korea Plastics Processing Joint Seminar, 2012, pages 39–44, 2012.
link bibtex

@inproceedings{mitsomwang2012feasibility,
  title={Feasibility study of crack propagation in acrylic sheet subjected to shear cutting},
  author={Mitsomwang, P},
  booktitle={Proceedings of 9th meeting, the Japan Korea Plastics Processing Joint Seminar, 2012},
  pages={39--44},
  year={2012}
}

2010 (1)

Feasibility of using TIG welding in dissimilar metals between steel/aluminum alloy. Borrisutthekul, R.; Mitsomwang, P.; Rattanachan, S.; and Mutoh, Y. Energy Research Journal, 1(2): 82–86. 2010.
link bibtex

@article{borrisutthekul2010feasibility,
  title={Feasibility of using TIG welding in dissimilar metals between steel/aluminum alloy},
  author={Borrisutthekul, Rattana and Mitsomwang, Pusit and Rattanachan, Sirirat and Mutoh, Yoshiharu},
  journal={Energy Research Journal},
  volume={1},
  number={2},
  pages={82--86},
  year={2010}
}

undefined (1)

Dissimilar Metals Joining between Magnesium alloy and Aluminum alloy. Mitsomwang, P.; and Borrisutthekul, R. . .
link bibtex

@article{mitsomwangdissimilar,
  title={Dissimilar Metals Joining between Magnesium alloy and Aluminum alloy},
  author={Mitsomwang, Pusit and Borrisutthekul, Rattana}
}