BibBase https://bibbase.org/f/HnQC7A6C8WxhqExKR/MTE_Usanee

2021 (3)

Damage of punch/die tools in steel wire rod shear cutting. Mitsomwang, P; Borrisutthekul, R; Kitkamthorn, U; Natpukkana, P; Panuwannakorn, R; and Khao-Phong, L Journal of Research and Applications in Mechanical Engineering, 9(2). 2021.
link bibtex

@article{mitsomwang2021damage,
  title={Damage of punch/die tools in steel wire rod shear cutting},
  author={Mitsomwang, P and Borrisutthekul, R and Kitkamthorn, U and Natpukkana, P and Panuwannakorn, R and Khao-Phong, L},
  journal={Journal of Research and Applications in Mechanical Engineering},
  volume={9},
  number={2},
  year={2021}
}

Influence of axial force and characteristics of axial force affecting on total knee replacement constraint test. Musikul, T.; Kitkamthorn, U.; Mitsomwang, P.; Sindhupakorn, B.; and Borrisutthekul, R. In IOP Conference Series: Materials Science and Engineering, volume 1137, pages 012041, 2021. IOP Publishing
link bibtex

@inproceedings{musikul2021influence,
  title={Influence of axial force and characteristics of axial force affecting on total knee replacement constraint test},
  author={Musikul, Tanapat and Kitkamthorn, Usanee and Mitsomwang, Pusit and Sindhupakorn, Bura and Borrisutthekul, Rattana},
  booktitle={IOP Conference Series: Materials Science and Engineering},
  volume={1137},
  number={1},
  pages={012041},
  year={2021},
  organization={IOP Publishing}
}

Steel fiber/polyethylene terephtalate composites. Duekhodthod, R.; Kitkamthorn, U.; Mitsomwang, P.; Intaing, T.; and Borrisutthekul, R. In IOP Conference Series: Materials Science and Engineering, volume 1137, pages 012026, 2021. IOP Publishing
link bibtex

@inproceedings{duekhodthod2021steel,
  title={Steel fiber/polyethylene terephtalate composites},
  author={Duekhodthod, Rossarin and Kitkamthorn, Usanee and Mitsomwang, Pusit and Intaing, Tawatchai and Borrisutthekul, Rattana},
  booktitle={IOP Conference Series: Materials Science and Engineering},
  volume={1137},
  number={1},
  pages={012026},
  year={2021},
  organization={IOP Publishing}
}

2018 (1)

Investigation of Strain Hardening in Aluminum Alloy Sheared Sheet Based on Microhardness Measurement and FEM Analysis. Mitsomwang, P.; Borrisutthekul, R.; Kitkamthorn, U.; and Nagasawa, S. International Journal of Automation Technology, 12(5): 714–722. 2018.
link bibtex

@article{mitsomwang2018investigation,
  title={Investigation of Strain Hardening in Aluminum Alloy Sheared Sheet Based on Microhardness Measurement and FEM Analysis},
  author={Mitsomwang, Pusit and Borrisutthekul, Rattana and Kitkamthorn, Usanee and Nagasawa, Shigeru},
  journal={International Journal of Automation Technology},
  volume={12},
  number={5},
  pages={714--722},
  year={2018},
  publisher={Fuji Technology Press Ltd.}
}

2017 (1)

Investigation of Strain Hardening in Aluminum Alloy Sheared Sheet Based on Micro Hardness Measurement and Finite Element Analysis. MITSOMWANG, P.; BORRISUTTHEKUL, R.; KITKAMTHORN, U.; and NAGASAWA, S. In Proceedings of International Conference on Leading Edge Manufacturing in 21st century: LEM21 2017.9, pages 011, 2017. The Japan Society of Mechanical Engineers
link bibtex

@inproceedings{mitsomwang2017investigation,
  title={Investigation of Strain Hardening in Aluminum Alloy Sheared Sheet Based on Micro Hardness Measurement and Finite Element Analysis},
  author={MITSOMWANG, Pusit and BORRISUTTHEKUL, Rattana and KITKAMTHORN, Usanee and NAGASAWA, Shigeru},
  booktitle={Proceedings of International Conference on Leading Edge Manufacturing in 21st century: LEM21 2017.9},
  pages={011},
  year={2017},
  organization={The Japan Society of Mechanical Engineers}
}

2014 (2)

Dry Sliding Wear Characteristics of AISI440C Martensitic Stainless Steel. Arparjirasakul, D.; Patcharawit, T.; and Kitkamthorn, U. In International Conference on Advances in Engineering and Technology (ICAET’2014) March, pages 29–30, 2014.
link bibtex

@inproceedings{arparjirasakul2014dry,
  title={Dry Sliding Wear Characteristics of AISI440C Martensitic Stainless Steel},
  author={Arparjirasakul, Dararat and Patcharawit, Tapany and Kitkamthorn, Usanee},
  booktitle={International Conference on Advances in Engineering and Technology (ICAET’2014) March},
  pages={29--30},
  year={2014}
}

Thermodynamics of biosorption of Zn and Cu in aqueous solution by Rhodopseudomonas boonkerdi sp. strain NS 20 and Bradyrhizobium sp. strain DO A9. Panitchagul, A.; Noisangiam, R.; Tittabutr, P.; Teaumroong, N.; and Kitkamthorn, U. In International conference on advances in engineering and technology, 2014.
link bibtex

@inproceedings{panitchagul2014thermodynamics,
  title={Thermodynamics of biosorption of Zn and Cu in aqueous solution by Rhodopseudomonas boonkerdi sp. strain NS 20 and Bradyrhizobium sp. strain DO A9},
  author={Panitchagul, Apichart and Noisangiam, Rujirek and Tittabutr, Panlada and Teaumroong, Neung and Kitkamthorn, Usanee},
  booktitle={International conference on advances in engineering and technology},
  year={2014}
}

2012 (2)

Mechanical bending simulation of thin stainless steel by using isotropic and orthotropic properties. Siwadamrongpong, S.; Kitkamthorn, U.; and Sajjawattana, C. Advanced Materials Research, 421: 312–315. 2012.
link bibtex

@article{siwadamrongpong2012mechanical,
  title={Mechanical bending simulation of thin stainless steel by using isotropic and orthotropic properties},
  author={Siwadamrongpong, Somsak and Kitkamthorn, Usanee and Sajjawattana, Chaiyapak},
  journal={Advanced Materials Research},
  volume={421},
  pages={312--315},
  year={2012},
  publisher={Trans Tech Publ}
}

Improvement of abrasion wear resistance of ductile iron by two-step austempering. Silawong, P.; Panitchagul, A.; Inthidech, S.; Akkarapattanagoon, N.; and Kitkamthorn, U. Advanced Materials Research, 567: 58–61. 2012.
link bibtex

@article{silawong2012improvement,
  title={Improvement of abrasion wear resistance of ductile iron by two-step austempering},
  author={Silawong, Prapaporn and Panitchagul, Apichart and Inthidech, Sudsakorn and Akkarapattanagoon, Narong and Kitkamthorn, Usanee},
  journal={Advanced Materials Research},
  volume={567},
  pages={58--61},
  year={2012},
  publisher={Trans Tech Publ}
}

2011 (1)

Microstructures of Cu-Alloyed Ductile Cast Iron Treated by Two-Step Austempering. Kitkamthorn, U. Solid State Phenomena, 172: 573–578. 2011.
link bibtex

@article{kitkamthorn2011microstructures,
  title={Microstructures of Cu-Alloyed Ductile Cast Iron Treated by Two-Step Austempering},
  author={Kitkamthorn, Usanee},
  journal={Solid State Phenomena},
  volume={172},
  pages={573--578},
  year={2011},
  publisher={Trans Tech Publ}
}

2010 (1)

Computer Simulation of Mechanical Response of Suspension Processed by Bending and Heat Treatment. Sajjawattana, C.; Phethan, S.; Thepayasuwan, N.; Rindle, J.; Borrisutthekul, R.; Kitkamthorn, U.; and Siwadamrongpong, S. In The First TSME International Conference on Mechanical Engineering, pages 20–22, 2010.
link bibtex

@inproceedings{sajjawattana2010computer,
  title={Computer Simulation of Mechanical Response of Suspension Processed by Bending and Heat Treatment},
  author={Sajjawattana, Chaiyapak and Phethan, Sitthichai and Thepayasuwan, Nattawut and Rindle, Johann and Borrisutthekul, Rattana and Kitkamthorn, Usanee and Siwadamrongpong, Somsak},
  booktitle={The First TSME International Conference on Mechanical Engineering},
  pages={20--22},
  year={2010}
}

2008 (2)

Vulcan-supported Pt electrocatalysts for PEMFCs prepared using supercritical carbon dioxide deposition. Bayrakçeken, A.; Smirnova, A.; Kitkamthorn, U.; Aindow, M.; Tuerker, L.; Eroğlu, İ.; and Erkey, C. Chemical Engineering Communications, 196(1-2): 194–203. 2008.
link bibtex

@article{bayrakcceken2008vulcan,
  title={Vulcan-supported Pt electrocatalysts for PEMFCs prepared using supercritical carbon dioxide deposition},
  author={Bayrak{\c{c}}eken, Ay{\c{s}}e and Smirnova, Alevtina and Kitkamthorn, Usanee and Aindow, Mark and Tuerker, Lemi and Ero{\u{g}}lu, {\.I}nc and Erkey, Can},
  journal={Chemical Engineering Communications},
  volume={196},
  number={1-2},
  pages={194--203},
  year={2008},
  publisher={Taylor \& Francis}
}

Pt-based electrocatalysts for polymer electrolyte membrane fuel cells prepared by supercritical deposition technique. Bayrakçeken, A.; Smirnova, A.; Kitkamthorn, U.; Aindow, M.; Türker, L.; Eroğlu, İ.; and Erkey, C. Journal of Power Sources, 179(2): 532–540. 2008.
link bibtex

@article{bayrakcceken2008pt,
  title={Pt-based electrocatalysts for polymer electrolyte membrane fuel cells prepared by supercritical deposition technique},
  author={Bayrak{\c{c}}eken, Ay{\c{s}}e and Smirnova, Alevtina and Kitkamthorn, Usanee and Aindow, Mark and T{\"u}rker, Lemi and Ero{\u{g}}lu, {\.I}nci and Erkey, Can},
  journal={Journal of Power Sources},
  volume={179},
  number={2},
  pages={532--540},
  year={2008},
  publisher={Elsevier}
}

2007 (3)

Morphology and structure of borides in as-cast titanium and gamma-titanium aluminide-based alloys. Kitkamthorn, U. Ph. D. Thesis. 2007.
link bibtex

@article{kitkamthorn2007morphology,
  title={Morphology and structure of borides in as-cast titanium and gamma-titanium aluminide-based alloys},
  author={Kitkamthorn, Usanee},
  journal={Ph. D. Thesis},
  year={2007}
}

Decoration of multi-wall carbon nanotubes with platinum nanoparticles using supercritical deposition with thermodynamic control of metal loading. Bayrakceken, A.; Kitkamthorn, U.; Aindow, M.; and Erkey, C. Scripta Materialia, 56(2): 101–103. 2007.
link bibtex

@article{bayrakceken2007decoration,
  title={Decoration of multi-wall carbon nanotubes with platinum nanoparticles using supercritical deposition with thermodynamic control of metal loading},
  author={Bayrakceken, Ayse and Kitkamthorn, Usanee and Aindow, Mark and Erkey, Can},
  journal={Scripta Materialia},
  volume={56},
  number={2},
  pages={101--103},
  year={2007},
  publisher={Elsevier}
}

Morphology and structure of borides in as-cast Ti and gamma-TiAl based alloys. Kitkamthorn, U. . 2007.
link bibtex

@article{kitkamthorn2007morphology,
  title={Morphology and structure of borides in as-cast Ti and gamma-TiAl based alloys},
  author={Kitkamthorn, Usanee},
  year={2007}
}

2006 (2)

The structure of ribbon borides in a Ti-44Al-4Nb-4Zr-1B alloy. Kitkamthorn, U; Zhang, L.; and Aindow, M Intermetallics, 14(7): 759–769. 2006.
link bibtex

@article{kitkamthorn2006structure,
  title={The structure of ribbon borides in a Ti-44Al-4Nb-4Zr-1B alloy},
  author={Kitkamthorn, U and Zhang, LC and Aindow, M},
  journal={Intermetallics},
  volume={14},
  number={7},
  pages={759--769},
  year={2006},
  publisher={Elsevier}
}

Commensurate intergrowths in titanium monoboride precipitates. Kitkamthorn, U.; and Aindow, M. Microscopy and Microanalysis, 12(S02): 1068–1069. 2006.
link bibtex

@article{kitkamthorn2006commensurate,
  title={Commensurate intergrowths in titanium monoboride precipitates},
  author={Kitkamthorn, Usanee and Aindow, Mark},
  journal={Microscopy and Microanalysis},
  volume={12},
  number={S02},
  pages={1068--1069},
  year={2006},
  publisher={Cambridge University Press}
}

2005 (1)

The structure of ribbon borides in a Ti-44Al-4Nb-4Zr-1B alloy. Kitkamthorn, U; Zhang, L; Aindow, T.; and Aindow, M Microscopy and Microanalysis, 11(S02): 1702–1703. 2005.
link bibtex

@article{kitkamthorn2005structure,
  title={The structure of ribbon borides in a Ti-44Al-4Nb-4Zr-1B alloy},
  author={Kitkamthorn, U and Zhang, L and Aindow, TT and Aindow, M},
  journal={Microscopy and Microanalysis},
  volume={11},
  number={S02},
  pages={1702--1703},
  year={2005},
  publisher={Cambridge University Press}
}

2003 (1)

Influence of copper and iron on solidification characteristics of 356 and 380-type aluminum alloys. Suwanpinij, P.; Kitkamthorn, U.; Diewwanit, I.; and Umeda, T. Materials Transactions, 44(5): 845–852. 2003.
link bibtex

@article{suwanpinij2003influence,
  title={Influence of copper and iron on solidification characteristics of 356 and 380-type aluminum alloys},
  author={Suwanpinij, Piyada and Kitkamthorn, Usanee and Diewwanit, Ittipon and Umeda, Takateru},
  journal={Materials Transactions},
  volume={44},
  number={5},
  pages={845--852},
  year={2003},
  publisher={The Japan Institute of Metals and Materials}
}

undefined (1)

Influence of Copper on Microstructure and Mechanical Properties of Hypereutectic Ductile Irons. Witchanantakul, T.; Kitkamthorn, U.; Boonmee, S.; Borrisutthekul, R.; and Akkarapattanagoon, N. . .
link bibtex

@article{witchanantakulinfluence,
  title={Influence of Copper on Microstructure and Mechanical Properties of Hypereutectic Ductile Irons},
  author={Witchanantakul, Thumrongsak and Kitkamthorn, Usanee and Boonmee, Sarum and Borrisutthekul, Rattana and Akkarapattanagoon, Narong}
}