Bed-load transport equation for sheet flow. Abrahams, A. D. Journal of Hydrologic Engineering, 2003. ![Bed-load transport equation for sheet flow [link]](https://bibbase.org/img/filetypes/link.svg "link")
Paper abstract bibtex When open-channel flows become sufficiently powerful, the mode of bed-load transport changes from saltation to sheet flow. Where there is no suspended sediment, sheet flow consists of a layer of colliding grains whose basal concentration approaches that of the stationary bed. These collisions give rise to a dispersive stress that acts normal to the bed and supports the bed load. An equation for predicting the rate of bed-load transport in sheet flow is developed from an analysis of 55 flume and closed conduit experiments. The equation is i(b) = omega where i(b) = immersed bed-load transport rate; and omega = flow power. That i(b) = omega implies that e(b) = tan alpha = u(b)/u, where e(b) = Bagnold's bed-load transport efficiency; u(b) = Mean grain velocity in the sheet-flow layer; and tan alpha = dynamic internal friction coefficient. Given that tan alpha approximate to 0.6 for natural sand, u(b) approximate to 0.6u, and e(b)approximate to 0.6. This finding is confirmed by an independent analysis of the experimental data. The value of 0.60 for e(b) is much larger than the value of 0.12 calculated by Bagnold, indicating that sheet flow is a much more efficient mode of bed-load transport than previously thought.
@article{abrahams_bed-load_2003,
title = {Bed-load transport equation for sheet flow},
volume = {129},
url = {http://ascelibrary.aip.org/getpdf/servlet/GetPDFServlet?filetype=pdf&id=JHEND8000129000002000159000001&idtype=cvips},
abstract = {When open-channel flows become sufficiently powerful, the mode of bed-load transport changes from saltation to sheet flow. Where there is no suspended sediment, sheet flow consists of a layer of colliding grains whose basal concentration approaches that of the stationary bed. These collisions give rise to a dispersive stress that acts normal to the bed and supports the bed load. An equation for predicting the rate of bed-load transport in sheet flow is developed from an analysis of 55 flume and closed conduit experiments. The equation is i(b) = omega where i(b) = immersed bed-load transport rate; and omega = flow power. That i(b) = omega implies that e(b) = tan alpha = u(b)/u, where e(b) = Bagnold's bed-load transport efficiency; u(b) = Mean grain velocity in the sheet-flow layer; and tan alpha = dynamic internal friction coefficient. Given that tan alpha approximate to 0.6 for natural sand, u(b) approximate to 0.6u, and e(b)approximate to 0.6. This finding is confirmed by an independent analysis of the experimental data. The value of 0.60 for e(b) is much larger than the value of 0.12 calculated by Bagnold, indicating that sheet flow is a much more efficient mode of bed-load transport than previously thought.},
journal = {Journal of Hydrologic Engineering},
author = {Abrahams, Athol D.},
year = {2003},
keywords = {JRN, model, hydrology}
}
Downloads: 0
{"_id":"KurnayZPMETmSxfJz","bibbaseid":"abrahams-bedloadtransportequationforsheetflow-2003","downloads":0,"creationDate":"2018-08-10T13:52:49.534Z","title":"Bed-load transport equation for sheet flow","author_short":["Abrahams, A. D."],"year":2003,"bibtype":"article","biburl":"https://utexas.box.com/shared/static/1aa39ptglchcfuw9c04ozm0pqjlxu4rw.bib","bibdata":{"bibtype":"article","type":"article","title":"Bed-load transport equation for sheet flow","volume":"129","url":"http://ascelibrary.aip.org/getpdf/servlet/GetPDFServlet?filetype=pdf&id=JHEND8000129000002000159000001&idtype=cvips","abstract":"When open-channel flows become sufficiently powerful, the mode of bed-load transport changes from saltation to sheet flow. Where there is no suspended sediment, sheet flow consists of a layer of colliding grains whose basal concentration approaches that of the stationary bed. These collisions give rise to a dispersive stress that acts normal to the bed and supports the bed load. An equation for predicting the rate of bed-load transport in sheet flow is developed from an analysis of 55 flume and closed conduit experiments. The equation is i(b) = omega where i(b) = immersed bed-load transport rate; and omega = flow power. That i(b) = omega implies that e(b) = tan alpha = u(b)/u, where e(b) = Bagnold's bed-load transport efficiency; u(b) = Mean grain velocity in the sheet-flow layer; and tan alpha = dynamic internal friction coefficient. Given that tan alpha approximate to 0.6 for natural sand, u(b) approximate to 0.6u, and e(b)approximate to 0.6. This finding is confirmed by an independent analysis of the experimental data. The value of 0.60 for e(b) is much larger than the value of 0.12 calculated by Bagnold, indicating that sheet flow is a much more efficient mode of bed-load transport than previously thought.","journal":"Journal of Hydrologic Engineering","author":[{"propositions":[],"lastnames":["Abrahams"],"firstnames":["Athol","D."],"suffixes":[]}],"year":"2003","keywords":"JRN, model, hydrology","bibtex":"@article{abrahams_bed-load_2003,\n\ttitle = {Bed-load transport equation for sheet flow},\n\tvolume = {129},\n\turl = {http://ascelibrary.aip.org/getpdf/servlet/GetPDFServlet?filetype=pdf&id=JHEND8000129000002000159000001&idtype=cvips},\n\tabstract = {When open-channel flows become sufficiently powerful, the mode of bed-load transport changes from saltation to sheet flow. Where there is no suspended sediment, sheet flow consists of a layer of colliding grains whose basal concentration approaches that of the stationary bed. These collisions give rise to a dispersive stress that acts normal to the bed and supports the bed load. An equation for predicting the rate of bed-load transport in sheet flow is developed from an analysis of 55 flume and closed conduit experiments. The equation is i(b) = omega where i(b) = immersed bed-load transport rate; and omega = flow power. That i(b) = omega implies that e(b) = tan alpha = u(b)/u, where e(b) = Bagnold's bed-load transport efficiency; u(b) = Mean grain velocity in the sheet-flow layer; and tan alpha = dynamic internal friction coefficient. Given that tan alpha approximate to 0.6 for natural sand, u(b) approximate to 0.6u, and e(b)approximate to 0.6. This finding is confirmed by an independent analysis of the experimental data. The value of 0.60 for e(b) is much larger than the value of 0.12 calculated by Bagnold, indicating that sheet flow is a much more efficient mode of bed-load transport than previously thought.},\n\tjournal = {Journal of Hydrologic Engineering},\n\tauthor = {Abrahams, Athol D.},\n\tyear = {2003},\n\tkeywords = {JRN, model, hydrology}\n}\n\n","author_short":["Abrahams, A. D."],"key":"abrahams_bed-load_2003","id":"abrahams_bed-load_2003","bibbaseid":"abrahams-bedloadtransportequationforsheetflow-2003","role":"author","urls":{"Paper":"http://ascelibrary.aip.org/getpdf/servlet/GetPDFServlet?filetype=pdf&id=JHEND8000129000002000159000001&idtype=cvips"},"keyword":["JRN","model","hydrology"],"downloads":0},"search_terms":["bed","load","transport","equation","sheet","flow","abrahams"],"keywords":["jrn","model","hydrology"],"authorIDs":[],"dataSources":["gCjo799mKWJtJmSdX"]}