Preparation and characterization of a praseodymium oxide to be used as a catalytic support

Preparation and characterization of a praseodymium oxide to be used as a catalytic support. Bernal, S., Botana, J, F., Cifredo, G., Calvino, J, J., Jobacho, A., Rodriguez-Izquierdo, & M, J. Journal of Alloys and Compounds, 180(1-2):271--279, 1992.

Paper abstract bibtex

This work reports on the preparation and characterization of a praseodymia sample to be used as a support for highly dispersed metals. The oxide sample was prepared by decomposing in a flow of helium, at 973 K, the phase obtained by precipitation with ammonia from a solution of Pr(NO3)3. The preparation conditions were established after investigating the thermal evolution of the precursor phase by thermogrammetric analysis, temperature-programmed decomposition-mass spectrometry, Fourier transform IR spectroscopy, X-ray diffraction, scanning electron microscopy and transmission electron microscopy. Data corresponding to the textural and chemical characterization studies carried out on the oxide are also presented and discussed. © 1992.

@article{ Bernal1992271,
  abstract = {This work reports on the preparation and characterization of a praseodymia sample to be used as a support for highly dispersed metals. The oxide sample was prepared by decomposing in a flow of helium, at 973 K, the phase obtained by precipitation with ammonia from a solution of Pr(NO3)3. The preparation conditions were established after investigating the thermal evolution of the precursor phase by thermogrammetric analysis, temperature-programmed decomposition-mass spectrometry, Fourier transform IR spectroscopy, X-ray diffraction, scanning electron microscopy and transmission electron microscopy. Data corresponding to the textural and chemical characterization studies carried out on the oxide are also presented and discussed. © 1992.},
  annote = {cited By (since 1996) 5},
  author = {Bernal, S and Botana, F J and Cifredo, G and Calvino, J J and Jobacho, A and Rodriguez-Izquierdo, J M},
  issn = {09258388},
  journal = {Journal of Alloys and Compounds},
  keywords = { Helium Flow; Praseodymium Oxide; Thermogrammetric Analysis; X-Ray Diffraction, Praseodymium Compounds,Catalysts; Microscopic Examination - Scanning Electron Microscopy; Oxides; Praseodymium Compounds - Characterization; X-Ray Analysis},
  number = {1-2},
  pages = {271--279},
  title = {{Preparation and characterization of a praseodymium oxide to be used as a catalytic support}},
  url = {https://www.scopus.com/inward/record.url?eid=2-s2.0-0026835604\&partnerID=40\&md5=4e141eb744be781131b38613b179e329},
  volume = {180},
  year = {1992}
}

Downloads: 0

{"_id":{"_str":"51f639ca59ced8df44000519"},"__v":2,"authorIDs":[],"author_short":["Bernal, S.","Botana","J, F.","Cifredo, G.","Calvino","J, J.","Jobacho, A.","Rodriguez-Izquierdo","M, J."],"bibbaseid":"bernal--j-cifredo--j-jobacho--m-preparationandcharacterizationofapraseodymiumoxidetobeusedasacatalyticsupport-1992","bibdata":{"html":"<div class=\"bibbase_paper\"> \n\n\n<span class=\"bibbase_paper_titleauthoryear\">\n\t<span class=\"bibbase_paper_title\"><a name=\"Bernal1992271\"> </a>Preparation and characterization of a praseodymium oxide to be used as a catalytic support.</span>\n\t<span class=\"bibbase_paper_author\">\nBernal, S.; Botana; J, F.; Cifredo, G.; Calvino; J, J.; Jobacho, A.; Rodriguez-Izquierdo; and M, J.</span>\n\t\n</span>\n\n\n\n<i>Journal of Alloys and Compounds</i>,\n\n180(1-2):271--279.\n\n 1992.\n\n\n\n\n<br class=\"bibbase_paper_content\"/>\n\n<span class=\"bibbase_paper_content\">\n \n \n \n \n \n\n <a href=\"https://www.scopus.com/inward/record.url?eid=2-s2.0-0026835604\\&partnerID=40\\&md5=4e141eb744be781131b38613b179e329\"\n onclick=\"javascript:log_download('bernal--j-cifredo--j-jobacho--m-preparationandcharacterizationofapraseodymiumoxidetobeusedasacatalyticsupport-1992', 'https://www.scopus.com/inward/record.url?eid=2-s2.0-0026835604\\&partnerID=40\\&md5=4e141eb744be781131b38613b179e329')\">\n <img src=\"http://www.bibbase.org/img/filetypes/blank.png\"\n\t alt=\"Preparation and characterization of a praseodymium oxide to be used as a catalytic support [.0-0026835604\\&partnerID=40\\&md5=4e141eb744be781131b38613b179e329]\" \n\t class=\"bibbase_icon\"\n\t style=\"width: 24px; height: 24px; border: 0px; vertical-align: text-top\" ><span class=\"bibbase_icon_text\">Paper</span></a> \n  \n \n \n <a href=\"javascript:showBib('Bernal1992271')\"\n class=\"bibbase link\">\n \n\t\n\t\n\t\n BibTeX\n <i class=\"fa fa-caret-down\"></i></a>\n \n \n  \n <a class=\"bibbase_abstract_link bibbase link\"\n href=\"javascript:showAbstract('Bernal1992271')\">\n Abstract\n <i class=\"fa fa-caret-down\"></i></a>\n \n \n \n\n \n \n \n</span>\n\n<div class=\"well well-small bibbase\" id=\"bib_Bernal1992271\"\n style=\"display:none\">\n <pre>@article{ Bernal1992271,\n abstract = {This work reports on the preparation and characterization of a praseodymia sample to be used as a support for highly dispersed metals. The oxide sample was prepared by decomposing in a flow of helium, at 973 K, the phase obtained by precipitation with ammonia from a solution of Pr(NO3)3. The preparation conditions were established after investigating the thermal evolution of the precursor phase by thermogrammetric analysis, temperature-programmed decomposition-mass spectrometry, Fourier transform IR spectroscopy, X-ray diffraction, scanning electron microscopy and transmission electron microscopy. Data corresponding to the textural and chemical characterization studies carried out on the oxide are also presented and discussed. © 1992.},\n annote = {cited By (since 1996) 5},\n author = {Bernal, S and Botana, F J and Cifredo, G and Calvino, J J and Jobacho, A and Rodriguez-Izquierdo, J M},\n issn = {09258388},\n journal = {Journal of Alloys and Compounds},\n keywords = { Helium Flow; Praseodymium Oxide; Thermogrammetric Analysis; X-Ray Diffraction, Praseodymium Compounds,Catalysts; Microscopic Examination - Scanning Electron Microscopy; Oxides; Praseodymium Compounds - Characterization; X-Ray Analysis},\n number = {1-2},\n pages = {271--279},\n title = {{Preparation and characterization of a praseodymium oxide to be used as a catalytic support}},\n url = {https://www.scopus.com/inward/record.url?eid=2-s2.0-0026835604\\&partnerID=40\\&md5=4e141eb744be781131b38613b179e329},\n volume = {180},\n year = {1992}\n}</pre>\n</div>\n\n\n<div class=\"well well-small bibbase\" id=\"abstract_Bernal1992271\"\n style=\"display:none\">\n This work reports on the preparation and characterization of a praseodymia sample to be used as a support for highly dispersed metals. The oxide sample was prepared by decomposing in a flow of helium, at 973 K, the phase obtained by precipitation with ammonia from a solution of Pr(NO3)3. The preparation conditions were established after investigating the thermal evolution of the precursor phase by thermogrammetric analysis, temperature-programmed decomposition-mass spectrometry, Fourier transform IR spectroscopy, X-ray diffraction, scanning electron microscopy and transmission electron microscopy. Data corresponding to the textural and chemical characterization studies carried out on the oxide are also presented and discussed. © 1992.\n</div>\n\n\n</div>\n","downloads":0,"keyword":["Helium Flow; Praseodymium Oxide; Thermogrammetric Analysis; X-Ray Diffraction","Praseodymium Compounds","Catalysts; Microscopic Examination - Scanning Electron Microscopy; Oxides; Praseodymium Compounds - Characterization; X-Ray Analysis"],"abstract":"This work reports on the preparation and characterization of a praseodymia sample to be used as a support for highly dispersed metals. The oxide sample was prepared by decomposing in a flow of helium, at 973 K, the phase obtained by precipitation with ammonia from a solution of Pr(NO3)3. The preparation conditions were established after investigating the thermal evolution of the precursor phase by thermogrammetric analysis, temperature-programmed decomposition-mass spectrometry, Fourier transform IR spectroscopy, X-ray diffraction, scanning electron microscopy and transmission electron microscopy. Data corresponding to the textural and chemical characterization studies carried out on the oxide are also presented and discussed. © 1992.","annote":"cited By (since 1996) 5","author":["Bernal, S","Botana","J, F","Cifredo, G","Calvino","J, J","Jobacho, A","Rodriguez-Izquierdo","M, J"],"author_short":["Bernal, S.","Botana","J, F.","Cifredo, G.","Calvino","J, J.","Jobacho, A.","Rodriguez-Izquierdo","M, J."],"bibtex":"@article{ Bernal1992271,\n abstract = {This work reports on the preparation and characterization of a praseodymia sample to be used as a support for highly dispersed metals. The oxide sample was prepared by decomposing in a flow of helium, at 973 K, the phase obtained by precipitation with ammonia from a solution of Pr(NO3)3. The preparation conditions were established after investigating the thermal evolution of the precursor phase by thermogrammetric analysis, temperature-programmed decomposition-mass spectrometry, Fourier transform IR spectroscopy, X-ray diffraction, scanning electron microscopy and transmission electron microscopy. Data corresponding to the textural and chemical characterization studies carried out on the oxide are also presented and discussed. © 1992.},\n annote = {cited By (since 1996) 5},\n author = {Bernal, S and Botana, F J and Cifredo, G and Calvino, J J and Jobacho, A and Rodriguez-Izquierdo, J M},\n issn = {09258388},\n journal = {Journal of Alloys and Compounds},\n keywords = { Helium Flow; Praseodymium Oxide; Thermogrammetric Analysis; X-Ray Diffraction, Praseodymium Compounds,Catalysts; Microscopic Examination - Scanning Electron Microscopy; Oxides; Praseodymium Compounds - Characterization; X-Ray Analysis},\n number = {1-2},\n pages = {271--279},\n title = {{Preparation and characterization of a praseodymium oxide to be used as a catalytic support}},\n url = {https://www.scopus.com/inward/record.url?eid=2-s2.0-0026835604\\&partnerID=40\\&md5=4e141eb744be781131b38613b179e329},\n volume = {180},\n year = {1992}\n}","bibtype":"article","id":"Bernal1992271","issn":"09258388","journal":"Journal of Alloys and Compounds","key":"Bernal1992271","keywords":"Helium Flow; Praseodymium Oxide; Thermogrammetric Analysis; X-Ray Diffraction, Praseodymium Compounds,Catalysts; Microscopic Examination - Scanning Electron Microscopy; Oxides; Praseodymium Compounds - Characterization; X-Ray Analysis","number":"1-2","pages":"271--279","title":"Preparation and characterization of a praseodymium oxide to be used as a catalytic support","type":"article","url":"https://www.scopus.com/inward/record.url?eid=2-s2.0-0026835604\\&partnerID=40\\&md5=4e141eb744be781131b38613b179e329","volume":"180","year":"1992","role":"author","urls":{"Paper":"https://www.scopus.com/inward/record.url?eid=2-s2.0-0026835604\\&partnerID=40\\&md5=4e141eb744be781131b38613b179e329"},"bibbaseid":"bernal--j-cifredo--j-jobacho--m-preparationandcharacterizationofapraseodymiumoxidetobeusedasacatalyticsupport-1992"},"bibtype":"article","biburl":"http://www2.uca.es/dept/cmat_qinor/nanomat/People/Calvino2.bib","downloads":0,"search_terms":["preparation","characterization","praseodymium","oxide","used","catalytic","support","bernal","botana","j","cifredo","calvino","j","jobacho","rodriguez-izquierdo","m"],"title":"Preparation and characterization of a praseodymium oxide to be used as a catalytic support","title_words":["preparation","characterization","praseodymium","oxide","used","catalytic","support"],"year":1992,"dataSources":["Qe5Mh2foqdg6ySpWW"]}