@InBook{B21,
  pages     = {272--280},
  title     = {{Additive Manufacturing-Oriented Redesign of Mantis 3.0 Hybrid Robot}},
  year      = {2019},
  author    = {Bruzzone, Luca and Fanghella, Pietro and Berselli, Giovanni and Bilancia, Pietro},
  volume    = {67},
  number    = {L},
  type      = {(D) Book Chapters},
  isbn      = {9783030002329},
  abstract  = {{\textcopyright} Springer Nature Switzerland AG 2019. The paper presents the third version of the hybrid leg-wheel ground mobile robot Mantis, a small-scale platform designed for inspection and surveillance tasks. The locomotion system is based on the cooperating action of a couple of actuated front legs and wheels, along with a passive rear carriage. The system performs wheeled locomotion on even grounds and hybrid locomotion in case of terrain irregularities or obstacles. This architecture combines high speed, energy efficiency, maneuverability and stable camera vision on flat terrains with good motion capabilities in unstructured environments. In the embodiment design presented hereafter, referred to as Mantis 3.0, the rear carriage has been equipped with four passive wheels, instead of two as in the previous versions, in order to improve the stability during steep stair climbing maneuvers; moreover, the legs, the main body and the rear carriage have been significantly redesigned in order to be realized by additive manufacturing techniques, with the final aim of obtaining a low-cost device suitable for Open Source distribution.},
  booktitle = {Mechanisms and Machine Science},
  doi       = {10.1007/978-3-030-00232-9_28},
  issn      = {22110992},
  keywords  = {Additive manufacturing,Ground mobile robot,Hybrid leg-wheel locomotion,Low-cost robotics,Step climbing},
  url       = {http://link.springer.com/10.1007/978-3-030-00232-9{\_}28},
  url_paper = {http://berselli.xara.hosting/berselli_papers/B2019_4.pdf},
}

{"_id":"qbydRF2pwYsieqtgX","bibbaseid":"bruzzone-fanghella-berselli-bilancia-additivemanufacturingorientedredesignofmantis30hybridrobot-2019","authorIDs":["5d3034415908a4ee01000025","5d3b76fc4795b0da010000f3"],"author_short":["Bruzzone, L.","Fanghella, P.","Berselli, G.","Bilancia, P."],"bibdata":{"bibtype":"inbook","type":"(D) Book Chapters","pages":"272–280","title":"Additive Manufacturing-Oriented Redesign of Mantis 3.0 Hybrid Robot","year":"2019","author":[{"propositions":[],"lastnames":["Bruzzone"],"firstnames":["Luca"],"suffixes":[]},{"propositions":[],"lastnames":["Fanghella"],"firstnames":["Pietro"],"suffixes":[]},{"propositions":[],"lastnames":["Berselli"],"firstnames":["Giovanni"],"suffixes":[]},{"propositions":[],"lastnames":["Bilancia"],"firstnames":["Pietro"],"suffixes":[]}],"volume":"67","number":"L","isbn":"9783030002329","abstract":"© Springer Nature Switzerland AG 2019. The paper presents the third version of the hybrid leg-wheel ground mobile robot Mantis, a small-scale platform designed for inspection and surveillance tasks. The locomotion system is based on the cooperating action of a couple of actuated front legs and wheels, along with a passive rear carriage. The system performs wheeled locomotion on even grounds and hybrid locomotion in case of terrain irregularities or obstacles. This architecture combines high speed, energy efficiency, maneuverability and stable camera vision on flat terrains with good motion capabilities in unstructured environments. In the embodiment design presented hereafter, referred to as Mantis 3.0, the rear carriage has been equipped with four passive wheels, instead of two as in the previous versions, in order to improve the stability during steep stair climbing maneuvers; moreover, the legs, the main body and the rear carriage have been significantly redesigned in order to be realized by additive manufacturing techniques, with the final aim of obtaining a low-cost device suitable for Open Source distribution.","booktitle":"Mechanisms and Machine Science","doi":"10.1007/978-3-030-00232-9_28","issn":"22110992","keywords":"Additive manufacturing,Ground mobile robot,Hybrid leg-wheel locomotion,Low-cost robotics,Step climbing","url":"http://link.springer.com/10.1007/978-3-030-00232-9\\_28","url_paper":"http://berselli.xara.hosting/berselli_papers/B2019_4.pdf","bibtex":"@InBook{B21,\r\n pages = {272--280},\r\n title = {{Additive Manufacturing-Oriented Redesign of Mantis 3.0 Hybrid Robot}},\r\n year = {2019},\r\n author = {Bruzzone, Luca and Fanghella, Pietro and Berselli, Giovanni and Bilancia, Pietro},\r\n volume = {67},\r\n number = {L},\r\n type = {(D) Book Chapters},\r\n isbn = {9783030002329},\r\n abstract = {{\\textcopyright} Springer Nature Switzerland AG 2019. The paper presents the third version of the hybrid leg-wheel ground mobile robot Mantis, a small-scale platform designed for inspection and surveillance tasks. The locomotion system is based on the cooperating action of a couple of actuated front legs and wheels, along with a passive rear carriage. The system performs wheeled locomotion on even grounds and hybrid locomotion in case of terrain irregularities or obstacles. This architecture combines high speed, energy efficiency, maneuverability and stable camera vision on flat terrains with good motion capabilities in unstructured environments. In the embodiment design presented hereafter, referred to as Mantis 3.0, the rear carriage has been equipped with four passive wheels, instead of two as in the previous versions, in order to improve the stability during steep stair climbing maneuvers; moreover, the legs, the main body and the rear carriage have been significantly redesigned in order to be realized by additive manufacturing techniques, with the final aim of obtaining a low-cost device suitable for Open Source distribution.},\r\n booktitle = {Mechanisms and Machine Science},\r\n doi = {10.1007/978-3-030-00232-9_28},\r\n issn = {22110992},\r\n keywords = {Additive manufacturing,Ground mobile robot,Hybrid leg-wheel locomotion,Low-cost robotics,Step climbing},\r\n url = {http://link.springer.com/10.1007/978-3-030-00232-9{\\_}28},\r\n url_paper = {http://berselli.xara.hosting/berselli_papers/B2019_4.pdf},\r\n}\r\n\r\n","author_short":["Bruzzone, L.","Fanghella, P.","Berselli, G.","Bilancia, P."],"key":"B21","id":"B21","bibbaseid":"bruzzone-fanghella-berselli-bilancia-additivemanufacturingorientedredesignofmantis30hybridrobot-2019","role":"author","urls":{"Paper":"http://link.springer.com/10.1007/978-3-030-00232-9\\_28"," paper":"http://berselli.xara.hosting/berselli_papers/B2019_4.pdf"},"keyword":["Additive manufacturing","Ground mobile robot","Hybrid leg-wheel locomotion","Low-cost robotics","Step climbing"],"metadata":{"authorlinks":{}},"downloads":1},"bibtype":"inbook","biburl":"http://berselli.xara.hosting/bib/Giovanni_Berselli_papers.bib","creationDate":"2019-07-26T19:52:32.085Z","downloads":1,"keywords":["additive manufacturing","ground mobile robot","hybrid leg-wheel locomotion","low-cost robotics","step climbing"],"search_terms":["additive","manufacturing","oriented","redesign","mantis","hybrid","robot","bruzzone","fanghella","berselli","bilancia"],"title":"Additive Manufacturing-Oriented Redesign of Mantis 3.0 Hybrid Robot","year":2019,"dataSources":["CT6btJcxgYjHahRRe","4rhp9hfuHXQQqMP7w"]}