Redundant robot control using task based performance measures

Redundant robot control using task based performance measures. Dubey, R. & Luh, J. Y. S. Journal of Robotic Systems, 5(5):409–432, October, 1988.

Paper doi abstract bibtex

The joint velocities required to move the end-effector of a redundant robot with a desired linear and angular velocity depend on its configuration. Similarly, the joint torques produced due to the force and moment at the end-effector also depend on its configuration. When the robot is near a singular configuration, the joint velocities required to attain the end-effector velocity in certain directions are extremely high. Similarly, in some configurations the joint torque produced at certain joints may be high for a relatively small magnitude of external force. An infinite number of trajectories in the joint space can be used to achieve a desired end-effector trajectory for redundant robots. However, a joint trajectory resulting in robot configurations requiring lower joint velocities or joint torques is desired. This may be achieved through a proper utilization of redundancy. Local performance measures for redundant robots are defined in this article as indicators of their ability to follow a desired end-effector trajectory and their ability to apply desired forces at the end-effector. Thus, these performance measures depend on the task to be performed. Control algorithms which can be efficiently applied to redundant robots to improve these performance measures are presented. These control algorithms are based on the gradient projection method. Gradients of the performance measures used in the control schemes result in simple symbolic expressions for “real world” robots'. Feasibility and effectiveness of these control schemes is demonstrated through the simulation of a seven-degree-of-freedom redundant robot derived from the PUMA geometry.

@article{dubey_redundant_1988,
	title = {Redundant robot control using task based performance measures},
	volume = {5},
	issn = {1097-4563},
	url = {http://onlinelibrary.wiley.com/doi/10.1002/rob.4620050502/abstract},
	doi = {10.1002/rob.4620050502},
	abstract = {The joint velocities required to move the end-effector of a redundant robot with a desired linear and angular velocity depend on its configuration. Similarly, the joint torques produced due to the force and moment at the end-effector also depend on its configuration. When the robot is near a singular configuration, the joint velocities required to attain the end-effector velocity in certain directions are extremely high. Similarly, in some configurations the joint torque produced at certain joints may be high for a relatively small magnitude of external force. An infinite number of trajectories in the joint space can be used to achieve a desired end-effector trajectory for redundant robots. However, a joint trajectory resulting in robot configurations requiring lower joint velocities or joint torques is desired. This may be achieved through a proper utilization of redundancy. Local performance measures for redundant robots are defined in this article as indicators of their ability to follow a desired end-effector trajectory and their ability to apply desired forces at the end-effector. Thus, these performance measures depend on the task to be performed. Control algorithms which can be efficiently applied to redundant robots to improve these performance measures are presented. These control algorithms are based on the gradient projection method. Gradients of the performance measures used in the control schemes result in simple symbolic expressions for “real world” robots'. Feasibility and effectiveness of these control schemes is demonstrated through the simulation of a seven-degree-of-freedom redundant robot derived from the PUMA geometry.},
	language = {en},
	number = {5},
	journal = {Journal of Robotic Systems},
	author = {Dubey, Rajiv and Luh, John Y. S.},
	month = oct,
	year = {1988},
	pages = {409--432}
}

Downloads: 0

{"_id":"Fd7PAhaoqEEQMNfQb","bibbaseid":"dubey-luh-redundantrobotcontrolusingtaskbasedperformancemeasures-1988","downloads":0,"creationDate":"2018-10-29T22:20:01.108Z","title":"Redundant robot control using task based performance measures","author_short":["Dubey, R.","Luh, J. Y. S."],"year":1988,"bibtype":"article","biburl":"https://bibbase.org/zotero/aorekhov","bibdata":{"bibtype":"article","type":"article","title":"Redundant robot control using task based performance measures","volume":"5","issn":"1097-4563","url":"http://onlinelibrary.wiley.com/doi/10.1002/rob.4620050502/abstract","doi":"10.1002/rob.4620050502","abstract":"The joint velocities required to move the end-effector of a redundant robot with a desired linear and angular velocity depend on its configuration. Similarly, the joint torques produced due to the force and moment at the end-effector also depend on its configuration. When the robot is near a singular configuration, the joint velocities required to attain the end-effector velocity in certain directions are extremely high. Similarly, in some configurations the joint torque produced at certain joints may be high for a relatively small magnitude of external force. An infinite number of trajectories in the joint space can be used to achieve a desired end-effector trajectory for redundant robots. However, a joint trajectory resulting in robot configurations requiring lower joint velocities or joint torques is desired. This may be achieved through a proper utilization of redundancy. Local performance measures for redundant robots are defined in this article as indicators of their ability to follow a desired end-effector trajectory and their ability to apply desired forces at the end-effector. Thus, these performance measures depend on the task to be performed. Control algorithms which can be efficiently applied to redundant robots to improve these performance measures are presented. These control algorithms are based on the gradient projection method. Gradients of the performance measures used in the control schemes result in simple symbolic expressions for “real world” robots'. Feasibility and effectiveness of these control schemes is demonstrated through the simulation of a seven-degree-of-freedom redundant robot derived from the PUMA geometry.","language":"en","number":"5","journal":"Journal of Robotic Systems","author":[{"propositions":[],"lastnames":["Dubey"],"firstnames":["Rajiv"],"suffixes":[]},{"propositions":[],"lastnames":["Luh"],"firstnames":["John","Y.","S."],"suffixes":[]}],"month":"October","year":"1988","pages":"409–432","bibtex":"@article{dubey_redundant_1988,\n\ttitle = {Redundant robot control using task based performance measures},\n\tvolume = {5},\n\tissn = {1097-4563},\n\turl = {http://onlinelibrary.wiley.com/doi/10.1002/rob.4620050502/abstract},\n\tdoi = {10.1002/rob.4620050502},\n\tabstract = {The joint velocities required to move the end-effector of a redundant robot with a desired linear and angular velocity depend on its configuration. Similarly, the joint torques produced due to the force and moment at the end-effector also depend on its configuration. When the robot is near a singular configuration, the joint velocities required to attain the end-effector velocity in certain directions are extremely high. Similarly, in some configurations the joint torque produced at certain joints may be high for a relatively small magnitude of external force. An infinite number of trajectories in the joint space can be used to achieve a desired end-effector trajectory for redundant robots. However, a joint trajectory resulting in robot configurations requiring lower joint velocities or joint torques is desired. This may be achieved through a proper utilization of redundancy. Local performance measures for redundant robots are defined in this article as indicators of their ability to follow a desired end-effector trajectory and their ability to apply desired forces at the end-effector. Thus, these performance measures depend on the task to be performed. Control algorithms which can be efficiently applied to redundant robots to improve these performance measures are presented. These control algorithms are based on the gradient projection method. Gradients of the performance measures used in the control schemes result in simple symbolic expressions for “real world” robots'. Feasibility and effectiveness of these control schemes is demonstrated through the simulation of a seven-degree-of-freedom redundant robot derived from the PUMA geometry.},\n\tlanguage = {en},\n\tnumber = {5},\n\tjournal = {Journal of Robotic Systems},\n\tauthor = {Dubey, Rajiv and Luh, John Y. S.},\n\tmonth = oct,\n\tyear = {1988},\n\tpages = {409--432}\n}\n\n","author_short":["Dubey, R.","Luh, J. Y. S."],"key":"dubey_redundant_1988","id":"dubey_redundant_1988","bibbaseid":"dubey-luh-redundantrobotcontrolusingtaskbasedperformancemeasures-1988","role":"author","urls":{"Paper":"http://onlinelibrary.wiley.com/doi/10.1002/rob.4620050502/abstract"},"downloads":0},"search_terms":["redundant","robot","control","using","task","based","performance","measures","dubey","luh"],"keywords":[],"authorIDs":[],"dataSources":["Q5cy5ZnQZvoGxZ7DT"]}