@misc{imgur_portable_nodate,
	title = {Portable *{50Amp}* {Vaporizer}},
	url = {https://imgur.com/a/S2NiL},
	abstract = {**This project is not complete: All electronics are to be sealed with a clear plastic cover and insulated.  All exposed wires and connections to the TI module are to be potted in epoxy.  Three of the same type of battery are to be used.  I only had a few junk ones sitting around when I was testing.**

I decided to see if I could make a portable variable voltage vaporizer based on Texas Instruments PTH12040W 50Amp power module after I found that I could fit three 18650 sleds in a small Otterbox (I was going to build a mod with two 18650s and a smaller power module).  Sure enough!  It actually fits! ...and works beautifully! 

I also added a lighted fire button, voltage readout, and a battery meter.  I may also add an external power jack for when I'm in my car, etc.  

I still have a few tweaks before I can seal it up: 

I need to add one more flat copper wire to replace the blue wire running to the atomizer (the flat wires are copper foil strips and kapton tape FYI).  I wasn't thinking when I made the ribbon cable and thought I could ground the atomizer to the battery.  There are also remnants of where I had an electrolytic capacitor that I decided wasn't really necessary... 

I need to Dremel out some more space for the TI module... The battery meter LED bar is actually orientated the wrong direction- but I'm not sure if I feel like rewiring it)...  

Stay tuned for a completed (and completely unnecessary) portable vape capable of 250 Watts!

( Video: https://www.facebook.com/photo.php?v=10152521349411278\&l=4926120936577759368 )},
	language = {en},
	urldate = {2018-10-16},
	journal = {Imgur},
	author = {Imgur}
}

{"_id":"5m9CceDk5WGCYJsvQ","bibbaseid":"imgur-portable50ampvaporizer","authorIDs":[],"author_short":["Imgur"],"bibdata":{"bibtype":"misc","type":"misc","title":"Portable *50Amp* Vaporizer","url":"https://imgur.com/a/S2NiL","abstract":"**This project is not complete: All electronics are to be sealed with a clear plastic cover and insulated. All exposed wires and connections to the TI module are to be potted in epoxy. Three of the same type of battery are to be used. I only had a few junk ones sitting around when I was testing.** I decided to see if I could make a portable variable voltage vaporizer based on Texas Instruments PTH12040W 50Amp power module after I found that I could fit three 18650 sleds in a small Otterbox (I was going to build a mod with two 18650s and a smaller power module). Sure enough! It actually fits! ...and works beautifully! I also added a lighted fire button, voltage readout, and a battery meter. I may also add an external power jack for when I'm in my car, etc. I still have a few tweaks before I can seal it up: I need to add one more flat copper wire to replace the blue wire running to the atomizer (the flat wires are copper foil strips and kapton tape FYI). I wasn't thinking when I made the ribbon cable and thought I could ground the atomizer to the battery. There are also remnants of where I had an electrolytic capacitor that I decided wasn't really necessary... I need to Dremel out some more space for the TI module... The battery meter LED bar is actually orientated the wrong direction- but I'm not sure if I feel like rewiring it)... Stay tuned for a completed (and completely unnecessary) portable vape capable of 250 Watts! ( Video: https://www.facebook.com/photo.php?v=10152521349411278&l=4926120936577759368 )","language":"en","urldate":"2018-10-16","journal":"Imgur","author":[{"firstnames":[],"propositions":[],"lastnames":["Imgur"],"suffixes":[]}],"bibtex":"@misc{imgur_portable_nodate,\n\ttitle = {Portable *{50Amp}* {Vaporizer}},\n\turl = {https://imgur.com/a/S2NiL},\n\tabstract = {**This project is not complete: All electronics are to be sealed with a clear plastic cover and insulated. All exposed wires and connections to the TI module are to be potted in epoxy. Three of the same type of battery are to be used. I only had a few junk ones sitting around when I was testing.**\n\nI decided to see if I could make a portable variable voltage vaporizer based on Texas Instruments PTH12040W 50Amp power module after I found that I could fit three 18650 sleds in a small Otterbox (I was going to build a mod with two 18650s and a smaller power module). Sure enough! It actually fits! ...and works beautifully! \n\nI also added a lighted fire button, voltage readout, and a battery meter. I may also add an external power jack for when I'm in my car, etc. \n\nI still have a few tweaks before I can seal it up: \n\nI need to add one more flat copper wire to replace the blue wire running to the atomizer (the flat wires are copper foil strips and kapton tape FYI). I wasn't thinking when I made the ribbon cable and thought I could ground the atomizer to the battery. There are also remnants of where I had an electrolytic capacitor that I decided wasn't really necessary... \n\nI need to Dremel out some more space for the TI module... The battery meter LED bar is actually orientated the wrong direction- but I'm not sure if I feel like rewiring it)... \n\nStay tuned for a completed (and completely unnecessary) portable vape capable of 250 Watts!\n\n( Video: https://www.facebook.com/photo.php?v=10152521349411278\\&l=4926120936577759368 )},\n\tlanguage = {en},\n\turldate = {2018-10-16},\n\tjournal = {Imgur},\n\tauthor = {Imgur}\n}\n\n","author_short":["Imgur"],"key":"imgur_portable_nodate","id":"imgur_portable_nodate","bibbaseid":"imgur-portable50ampvaporizer","role":"author","urls":{"Paper":"https://imgur.com/a/S2NiL"},"downloads":0,"html":""},"bibtype":"misc","biburl":"https://bibbase.org/zotero/21h","creationDate":"2020-05-22T18:11:30.463Z","downloads":0,"keywords":[],"search_terms":["portable","50amp","vaporizer","imgur"],"title":"Portable *50Amp* Vaporizer","year":null,"dataSources":["NpxDwkFvCjNmGYFSj"]}