Optimizing the Synthesis of Red- to Near-IR-Emitting CdS-Capped CdTexSe1-x Alloyed Quantum Dots for Biomedical Imaging. Jiang, W., Singhal, A., Zheng, J., Wang, C., & Chan, W. C. W. Chem. Mater., 18(20):4845–4854, October, 2006. Publisher: American Chemical Society![Optimizing the Synthesis of Red- to Near-IR-Emitting CdS-Capped CdTexSe1-x Alloyed Quantum Dots for Biomedical Imaging [link]](https://bibbase.org/img/filetypes/link.svg "link")
Paper ![Optimizing the Synthesis of Red- to Near-IR-Emitting CdS-Capped CdTexSe1-x Alloyed Quantum Dots for Biomedical Imaging [pdf]](https://bibbase.org/img/filetypes/pdf.svg "pdf")
Paper doi abstract bibtex Advancements in biomedical imaging require the development of optical contrast agents at an emission region of low biological tissue absorbance, fluorescence, and scattering. This region occurs in the red to near-IR (\textgreater600 nm) wavelength window. Quantum dots (Qdots) are excellent candidates for such applications. However, there are major challenges with developing high optical quality far-red- to near-IR-emitting Qdots (i.e., poor reproducibility, low quantum yield, and lack of photostability). Our aim is to systematically study how to prepare alloyed CdTexSe1-x with these properties. We discovered that the precursor concentrations of Te-to-Se and growth time had major impacts on the Qdot's optical properties. We also learned that the capping of these alloyed Qdots were difficult with ZnS but feasible with CdS because of the ZnS's lattice mismatch with the CdTexSe1-x. These systematic and basic studies led to the optimization of synthetic parameters for preparing Qdots with high quantum yield (\textgreater30%), narrow fluorescence full width at half-maxima (\textless50%), and stability against photobleaching (\textgreater10 min under 100W Hg lamp excitation with a 1.4 numerical aperture 60× objective) for biomedical imaging and detection. We further demonstrate the conjugation of biorecognition molecules onto the surface of these alloyed Qdots and characterize their use as contrast agents in multicolored and ultrasensitive imaging.
@article{jiang_optimizing_2006,
title = {Optimizing the {Synthesis} of {Red}- to {Near}-{IR}-{Emitting} {CdS}-{Capped} {CdTexSe1}-x {Alloyed} {Quantum} {Dots} for {Biomedical} {Imaging}},
volume = {18},
issn = {0897-4756},
url = {https://doi.org/10.1021/cm061311x},
doi = {10.1021/cm061311x},
abstract = {Advancements in biomedical imaging require the development of optical contrast agents at an emission region of low biological tissue absorbance, fluorescence, and scattering. This region occurs in the red to near-IR ({\textgreater}600 nm) wavelength window. Quantum dots (Qdots) are excellent candidates for such applications. However, there are major challenges with developing high optical quality far-red- to near-IR-emitting Qdots (i.e., poor reproducibility, low quantum yield, and lack of photostability). Our aim is to systematically study how to prepare alloyed CdTexSe1-x with these properties. We discovered that the precursor concentrations of Te-to-Se and growth time had major impacts on the Qdot's optical properties. We also learned that the capping of these alloyed Qdots were difficult with ZnS but feasible with CdS because of the ZnS's lattice mismatch with the CdTexSe1-x. These systematic and basic studies led to the optimization of synthetic parameters for preparing Qdots with high quantum yield ({\textgreater}30\%), narrow fluorescence full width at half-maxima ({\textless}50\%), and stability against photobleaching ({\textgreater}10 min under 100W Hg lamp excitation with a 1.4 numerical aperture 60× objective) for biomedical imaging and detection. We further demonstrate the conjugation of biorecognition molecules onto the surface of these alloyed Qdots and characterize their use as contrast agents in multicolored and ultrasensitive imaging.},
number = {20},
urldate = {2021-11-06},
journal = {Chem. Mater.},
author = {Jiang, Wen and Singhal, Anupam and Zheng, Jianing and Wang, Chen and Chan, Warren C. W.},
month = oct,
year = {2006},
note = {Publisher: American Chemical Society},
pages = {4845--4854},
file = {Full Text PDF:files/2225/Jiang et al. - 2006 - Optimizing the Synthesis of Red- to Near-IR-Emitti.pdf:application/pdf;ACS Full Text Snapshot:files/2228/cm061311x.html:text/html},
url_Paper = {https://inbs.med.utoronto.ca/wp-content/uploads/2020/08/cm061311x.pdf}
}
Downloads: 0
{"_id":"noLh5zxsdJPx4TzG7","bibbaseid":"jiang-singhal-zheng-wang-chan-optimizingthesynthesisofredtoneariremittingcdscappedcdtexse1xalloyedquantumdotsforbiomedicalimaging-2006","author_short":["Jiang, W.","Singhal, A.","Zheng, J.","Wang, C.","Chan, W. C. W."],"bibdata":{"bibtype":"article","type":"article","title":"Optimizing the Synthesis of Red- to Near-IR-Emitting CdS-Capped CdTexSe1-x Alloyed Quantum Dots for Biomedical Imaging","volume":"18","issn":"0897-4756","url":"https://doi.org/10.1021/cm061311x","doi":"10.1021/cm061311x","abstract":"Advancements in biomedical imaging require the development of optical contrast agents at an emission region of low biological tissue absorbance, fluorescence, and scattering. This region occurs in the red to near-IR (\\textgreater600 nm) wavelength window. Quantum dots (Qdots) are excellent candidates for such applications. However, there are major challenges with developing high optical quality far-red- to near-IR-emitting Qdots (i.e., poor reproducibility, low quantum yield, and lack of photostability). Our aim is to systematically study how to prepare alloyed CdTexSe1-x with these properties. We discovered that the precursor concentrations of Te-to-Se and growth time had major impacts on the Qdot's optical properties. We also learned that the capping of these alloyed Qdots were difficult with ZnS but feasible with CdS because of the ZnS's lattice mismatch with the CdTexSe1-x. These systematic and basic studies led to the optimization of synthetic parameters for preparing Qdots with high quantum yield (\\textgreater30%), narrow fluorescence full width at half-maxima (\\textless50%), and stability against photobleaching (\\textgreater10 min under 100W Hg lamp excitation with a 1.4 numerical aperture 60× objective) for biomedical imaging and detection. We further demonstrate the conjugation of biorecognition molecules onto the surface of these alloyed Qdots and characterize their use as contrast agents in multicolored and ultrasensitive imaging.","number":"20","urldate":"2021-11-06","journal":"Chem. Mater.","author":[{"propositions":[],"lastnames":["Jiang"],"firstnames":["Wen"],"suffixes":[]},{"propositions":[],"lastnames":["Singhal"],"firstnames":["Anupam"],"suffixes":[]},{"propositions":[],"lastnames":["Zheng"],"firstnames":["Jianing"],"suffixes":[]},{"propositions":[],"lastnames":["Wang"],"firstnames":["Chen"],"suffixes":[]},{"propositions":[],"lastnames":["Chan"],"firstnames":["Warren","C.","W."],"suffixes":[]}],"month":"October","year":"2006","note":"Publisher: American Chemical Society","pages":"4845–4854","file":"Full Text PDF:files/2225/Jiang et al. - 2006 - Optimizing the Synthesis of Red- to Near-IR-Emitti.pdf:application/pdf;ACS Full Text Snapshot:files/2228/cm061311x.html:text/html","url_paper":"https://inbs.med.utoronto.ca/wp-content/uploads/2020/08/cm061311x.pdf","bibtex":"@article{jiang_optimizing_2006,\n\ttitle = {Optimizing the {Synthesis} of {Red}- to {Near}-{IR}-{Emitting} {CdS}-{Capped} {CdTexSe1}-x {Alloyed} {Quantum} {Dots} for {Biomedical} {Imaging}},\n\tvolume = {18},\n\tissn = {0897-4756},\n\turl = {https://doi.org/10.1021/cm061311x},\n\tdoi = {10.1021/cm061311x},\n\tabstract = {Advancements in biomedical imaging require the development of optical contrast agents at an emission region of low biological tissue absorbance, fluorescence, and scattering. This region occurs in the red to near-IR ({\\textgreater}600 nm) wavelength window. Quantum dots (Qdots) are excellent candidates for such applications. However, there are major challenges with developing high optical quality far-red- to near-IR-emitting Qdots (i.e., poor reproducibility, low quantum yield, and lack of photostability). Our aim is to systematically study how to prepare alloyed CdTexSe1-x with these properties. We discovered that the precursor concentrations of Te-to-Se and growth time had major impacts on the Qdot's optical properties. We also learned that the capping of these alloyed Qdots were difficult with ZnS but feasible with CdS because of the ZnS's lattice mismatch with the CdTexSe1-x. These systematic and basic studies led to the optimization of synthetic parameters for preparing Qdots with high quantum yield ({\\textgreater}30\\%), narrow fluorescence full width at half-maxima ({\\textless}50\\%), and stability against photobleaching ({\\textgreater}10 min under 100W Hg lamp excitation with a 1.4 numerical aperture 60× objective) for biomedical imaging and detection. We further demonstrate the conjugation of biorecognition molecules onto the surface of these alloyed Qdots and characterize their use as contrast agents in multicolored and ultrasensitive imaging.},\n\tnumber = {20},\n\turldate = {2021-11-06},\n\tjournal = {Chem. Mater.},\n\tauthor = {Jiang, Wen and Singhal, Anupam and Zheng, Jianing and Wang, Chen and Chan, Warren C. W.},\n\tmonth = oct,\n\tyear = {2006},\n\tnote = {Publisher: American Chemical Society},\n\tpages = {4845--4854},\n\tfile = {Full Text PDF:files/2225/Jiang et al. - 2006 - Optimizing the Synthesis of Red- to Near-IR-Emitti.pdf:application/pdf;ACS Full Text Snapshot:files/2228/cm061311x.html:text/html},\n\turl_Paper = {https://inbs.med.utoronto.ca/wp-content/uploads/2020/08/cm061311x.pdf}\n}\n\n","author_short":["Jiang, W.","Singhal, A.","Zheng, J.","Wang, C.","Chan, W. C. W."],"key":"jiang_optimizing_2006","id":"jiang_optimizing_2006","bibbaseid":"jiang-singhal-zheng-wang-chan-optimizingthesynthesisofredtoneariremittingcdscappedcdtexse1xalloyedquantumdotsforbiomedicalimaging-2006","role":"author","urls":{"Paper":"https://doi.org/10.1021/cm061311x"," paper":"https://inbs.med.utoronto.ca/wp-content/uploads/2020/08/cm061311x.pdf"},"metadata":{"authorlinks":{}},"html":""},"bibtype":"article","biburl":"https://inbslab.com//wp-content/uploads/2024/03/Chan-2024_03-14.txt","dataSources":["zb3p4i4Fd9wXynbkF","pF7M3AvRzd8m3Nc5t","BqtRhZTYdfYNLhWzp","sBWiDMMhfDHZnN93b","zkBeHFgTXc62hytzj","s3xwaPmQ7EjjEcMSb","5npqWkz6DHBZLyn3J","yc5dXnBwovT8YvCrt","nLduyq7S9B96QB8B5","JiWrSgLBTKbDLqiYi"],"keywords":[],"search_terms":["optimizing","synthesis","red","near","emitting","cds","capped","cdtexse1","alloyed","quantum","dots","biomedical","imaging","jiang","singhal","zheng","wang","chan"],"title":"Optimizing the Synthesis of Red- to Near-IR-Emitting CdS-Capped CdTexSe1-x Alloyed Quantum Dots for Biomedical Imaging","year":2006}