Photoelectrochemical and Optical Properties of Nitrogen Doped Titanium Dioxide Films Prepared by Reactive DC Magnetron Sputtering. Lindgren, T., Mwabora, J. M., Avendaño, E., Jonsson, J., Hoel, A., Granqvist, C., & Lindquist, S. The Journal of Physical Chemistry B, 107(24):5709--5716, June, 2003.
Photoelectrochemical and Optical Properties of Nitrogen Doped Titanium Dioxide Films Prepared by Reactive DC Magnetron Sputtering [link]Paper  doi  abstract   bibtex   
Nanocrystalline porous nitrogen doped titanium dioxide (TiO2) thin films were prepared by DC magnetron sputtering. Films were deposited in a plasma of argon, oxygen, and nitrogen, with varying nitrogen contents. The films were characterized by X-ray diffraction, scanning electron microscopy, and optical- and photoelectrochemical (PEC) measurements. These studies showed that the films were porous and displaying rough surfaces with sharp, protruding nodules having a crystal structure varying from rutile to anatase depending on the nitrogen content. All nitrogen doped films showed visible light absorption in the wavelength range from 400 to 535 nm. The PEC properties of the thin film electrodes were determined on as-deposited as well as dye-sensitized films. The nitrogen doped TiO2 generated an incident photon-to-current efficiency response in good agreement with the optical spectra. The PEC measurements on dye-sensitized films showed that the electron-transfer properties in the conduction band were similar to those of undoped TiO2. It was also experimentally confirmed that the states introduced by nitrogen lie close to the valence band edge. For the best nitrogen doped TiO2 electrodes, the photoinduced current due to visible light and at moderate bias was increased around 200 times compared to the behavior of pure TiO2 electrodes. There is an optimum in introduced nitrogen where the response is highest.
@article{lindgren_photoelectrochemical_2003,
	title = {Photoelectrochemical and {Optical} {Properties} of {Nitrogen} {Doped} {Titanium} {Dioxide} {Films} {Prepared} by {Reactive} {DC} {Magnetron} {Sputtering}},
	volume = {107},
	issn = {1520-6106},
	url = {http://dx.doi.org/10.1021/jp027345j},
	doi = {10.1021/jp027345j},
	abstract = {Nanocrystalline porous nitrogen doped titanium dioxide (TiO2) thin films were prepared by DC magnetron sputtering. Films were deposited in a plasma of argon, oxygen, and nitrogen, with varying nitrogen contents. The films were characterized by X-ray diffraction, scanning electron microscopy, and optical- and photoelectrochemical (PEC) measurements. These studies showed that the films were porous and displaying rough surfaces with sharp, protruding nodules having a crystal structure varying from rutile to anatase depending on the nitrogen content. All nitrogen doped films showed visible light absorption in the wavelength range from 400 to 535 nm. The PEC properties of the thin film electrodes were determined on as-deposited as well as dye-sensitized films. The nitrogen doped TiO2 generated an incident photon-to-current efficiency response in good agreement with the optical spectra. The PEC measurements on dye-sensitized films showed that the electron-transfer properties in the conduction band were similar to those of undoped TiO2. It was also experimentally confirmed that the states introduced by nitrogen lie close to the valence band edge. For the best nitrogen doped TiO2 electrodes, the photoinduced current due to visible light and at moderate bias was increased around 200 times compared to the behavior of pure TiO2 electrodes. There is an optimum in introduced nitrogen where the response is highest.},
	number = {24},
	urldate = {2014-11-20TZ},
	journal = {The Journal of Physical Chemistry B},
	author = {Lindgren, Torbjörn and Mwabora, Julius M. and Avendaño, Esteban and Jonsson, Jacob and Hoel, Anders and Granqvist, Claes-Göran and Lindquist, Sten-Eric},
	month = jun,
	year = {2003},
	pages = {5709--5716}
}

Downloads: 0