Microstructure and mechanical behavior of NS/UFG aluminum prepared by cryomilling and spark plasma sintering. Liu, D., Xiong, Y., Li, P., Lin, Y., Chen, F., Zhang, L., Schoenung, J. M., & Lavernia, E. J. Journal of Alloys and Compounds, 679(Supplement C):426–435, September, 2016. ![Microstructure and mechanical behavior of NS/UFG aluminum prepared by cryomilling and spark plasma sintering [link]](https://bibbase.org/img/filetypes/link.svg "link")
Paper doi abstract bibtex We report on a study of the microstructure and mechanical behavior of a bulk nanostructured (NS)/ultra-fine grained (UFG) aluminum fabricated by cryomilling and high-pressure spark plasma sintering (SPS). The compressive yield stress of the consolidated material is determined to be 380 MPa, which is significantly higher than that of commercial strain hardened aluminum (124 MPa). Microstructural studies reveal that the nanometric grains are embedded inside a matrix of ultra-fine grains in the bulk material. The corresponding average grain size is approximately 125 nm and with a distribution of grains that are smaller than 500 nm. Moreover, chemical analysis of the powder particles and the consolidated samples indicates that carbon and oxygen levels remain unchanged, and that there is a slight decrease in the nitrogen level and a significant reduction in the hydrogen level after spark plasma sintering. Semi-quantitative analysis suggests that the mechanisms that contribute to the strength of the consolidated material include: grain boundary strengthening, second phase strengthening and dislocation strengthening.
@article{liu_microstructure_2016,
title = {Microstructure and mechanical behavior of {NS}/{UFG} aluminum prepared by cryomilling and spark plasma sintering},
volume = {679},
issn = {0925-8388},
url = {http://www.sciencedirect.com/science/article/pii/S0925838816310271},
doi = {10.1016/j.jallcom.2016.04.073},
abstract = {We report on a study of the microstructure and mechanical behavior of a bulk nanostructured (NS)/ultra-fine grained (UFG) aluminum fabricated by cryomilling and high-pressure spark plasma sintering (SPS). The compressive yield stress of the consolidated material is determined to be 380 MPa, which is significantly higher than that of commercial strain hardened aluminum (124 MPa). Microstructural studies reveal that the nanometric grains are embedded inside a matrix of ultra-fine grains in the bulk material. The corresponding average grain size is approximately 125 nm and with a distribution of grains that are smaller than 500 nm. Moreover, chemical analysis of the powder particles and the consolidated samples indicates that carbon and oxygen levels remain unchanged, and that there is a slight decrease in the nitrogen level and a significant reduction in the hydrogen level after spark plasma sintering. Semi-quantitative analysis suggests that the mechanisms that contribute to the strength of the consolidated material include: grain boundary strengthening, second phase strengthening and dislocation strengthening.},
number = {Supplement C},
urldate = {2018-01-08},
journal = {Journal of Alloys and Compounds},
author = {Liu, Dongming and Xiong, Yuhong and Li, Ping and Lin, Yaojun and Chen, Fei and Zhang, Lianmeng and Schoenung, Julie M. and Lavernia, Enrique J.},
month = sep,
year = {2016},
keywords = {Chemical analysis, Mechanical property, Nanostructured materials, Published, Reviewed, Spark plasma sintering, Strengthening mechanisms, Ultra-fine grained materials},
pages = {426--435},
}
Downloads: 0
{"_id":"8zrwkdM3WwEcigRmY","bibbaseid":"liu-xiong-li-lin-chen-zhang-schoenung-lavernia-microstructureandmechanicalbehaviorofnsufgaluminumpreparedbycryomillingandsparkplasmasintering-2016","downloads":0,"creationDate":"2018-01-30T21:09:09.976Z","title":"Microstructure and mechanical behavior of NS/UFG aluminum prepared by cryomilling and spark plasma sintering","author_short":["Liu, D.","Xiong, Y.","Li, P.","Lin, Y.","Chen, F.","Zhang, L.","Schoenung, J. M.","Lavernia, E. J."],"year":2016,"bibtype":"article","biburl":"https://api.zotero.org/users/4671851/collections/XXZ2J5VG/items?key=vvOULaCMZpmPfaYPyYLTHkeL&format=bibtex&limit=100","bibdata":{"bibtype":"article","type":"article","title":"Microstructure and mechanical behavior of NS/UFG aluminum prepared by cryomilling and spark plasma sintering","volume":"679","issn":"0925-8388","url":"http://www.sciencedirect.com/science/article/pii/S0925838816310271","doi":"10.1016/j.jallcom.2016.04.073","abstract":"We report on a study of the microstructure and mechanical behavior of a bulk nanostructured (NS)/ultra-fine grained (UFG) aluminum fabricated by cryomilling and high-pressure spark plasma sintering (SPS). The compressive yield stress of the consolidated material is determined to be 380 MPa, which is significantly higher than that of commercial strain hardened aluminum (124 MPa). Microstructural studies reveal that the nanometric grains are embedded inside a matrix of ultra-fine grains in the bulk material. The corresponding average grain size is approximately 125 nm and with a distribution of grains that are smaller than 500 nm. Moreover, chemical analysis of the powder particles and the consolidated samples indicates that carbon and oxygen levels remain unchanged, and that there is a slight decrease in the nitrogen level and a significant reduction in the hydrogen level after spark plasma sintering. Semi-quantitative analysis suggests that the mechanisms that contribute to the strength of the consolidated material include: grain boundary strengthening, second phase strengthening and dislocation strengthening.","number":"Supplement C","urldate":"2018-01-08","journal":"Journal of Alloys and Compounds","author":[{"propositions":[],"lastnames":["Liu"],"firstnames":["Dongming"],"suffixes":[]},{"propositions":[],"lastnames":["Xiong"],"firstnames":["Yuhong"],"suffixes":[]},{"propositions":[],"lastnames":["Li"],"firstnames":["Ping"],"suffixes":[]},{"propositions":[],"lastnames":["Lin"],"firstnames":["Yaojun"],"suffixes":[]},{"propositions":[],"lastnames":["Chen"],"firstnames":["Fei"],"suffixes":[]},{"propositions":[],"lastnames":["Zhang"],"firstnames":["Lianmeng"],"suffixes":[]},{"propositions":[],"lastnames":["Schoenung"],"firstnames":["Julie","M."],"suffixes":[]},{"propositions":[],"lastnames":["Lavernia"],"firstnames":["Enrique","J."],"suffixes":[]}],"month":"September","year":"2016","keywords":"Chemical analysis, Mechanical property, Nanostructured materials, Published, Reviewed, Spark plasma sintering, Strengthening mechanisms, Ultra-fine grained materials","pages":"426–435","bibtex":"@article{liu_microstructure_2016,\n\ttitle = {Microstructure and mechanical behavior of {NS}/{UFG} aluminum prepared by cryomilling and spark plasma sintering},\n\tvolume = {679},\n\tissn = {0925-8388},\n\turl = {http://www.sciencedirect.com/science/article/pii/S0925838816310271},\n\tdoi = {10.1016/j.jallcom.2016.04.073},\n\tabstract = {We report on a study of the microstructure and mechanical behavior of a bulk nanostructured (NS)/ultra-fine grained (UFG) aluminum fabricated by cryomilling and high-pressure spark plasma sintering (SPS). The compressive yield stress of the consolidated material is determined to be 380 MPa, which is significantly higher than that of commercial strain hardened aluminum (124 MPa). Microstructural studies reveal that the nanometric grains are embedded inside a matrix of ultra-fine grains in the bulk material. The corresponding average grain size is approximately 125 nm and with a distribution of grains that are smaller than 500 nm. Moreover, chemical analysis of the powder particles and the consolidated samples indicates that carbon and oxygen levels remain unchanged, and that there is a slight decrease in the nitrogen level and a significant reduction in the hydrogen level after spark plasma sintering. Semi-quantitative analysis suggests that the mechanisms that contribute to the strength of the consolidated material include: grain boundary strengthening, second phase strengthening and dislocation strengthening.},\n\tnumber = {Supplement C},\n\turldate = {2018-01-08},\n\tjournal = {Journal of Alloys and Compounds},\n\tauthor = {Liu, Dongming and Xiong, Yuhong and Li, Ping and Lin, Yaojun and Chen, Fei and Zhang, Lianmeng and Schoenung, Julie M. and Lavernia, Enrique J.},\n\tmonth = sep,\n\tyear = {2016},\n\tkeywords = {Chemical analysis, Mechanical property, Nanostructured materials, Published, Reviewed, Spark plasma sintering, Strengthening mechanisms, Ultra-fine grained materials},\n\tpages = {426--435},\n}\n\n","author_short":["Liu, D.","Xiong, Y.","Li, P.","Lin, Y.","Chen, F.","Zhang, L.","Schoenung, J. M.","Lavernia, E. J."],"key":"liu_microstructure_2016","id":"liu_microstructure_2016","bibbaseid":"liu-xiong-li-lin-chen-zhang-schoenung-lavernia-microstructureandmechanicalbehaviorofnsufgaluminumpreparedbycryomillingandsparkplasmasintering-2016","role":"author","urls":{"Paper":"http://www.sciencedirect.com/science/article/pii/S0925838816310271"},"keyword":["Chemical analysis","Mechanical property","Nanostructured materials","Published","Reviewed","Spark plasma sintering","Strengthening mechanisms","Ultra-fine grained materials"],"metadata":{"authorlinks":{"schoenung, j":"https://bibbase.org/show?bib=https%3A%2F%2Fapi.zotero.org%2Fusers%2F4671851%2Fcollections%2FXXZ2J5VG%2Fitems%3Fkey%3DL89ZjIJ16okbNdo70PCkz3uG%26format%3Dbibtex%26limit%3D100"}},"downloads":0},"search_terms":["microstructure","mechanical","behavior","ufg","aluminum","prepared","cryomilling","spark","plasma","sintering","liu","xiong","li","lin","chen","zhang","schoenung","lavernia"],"keywords":["chemical analysis","mechanical property","nanostructured materials","published","reviewed","spark plasma sintering","strengthening mechanisms","ultra-fine grained materials"],"authorIDs":["uTxMcEcC4gwQfLeyA"],"dataSources":["fwNzNB5PwpuzC53kN","hiwKfY3EQ6YzYGH2Q","ngWwEutRfY7NatfFX"]}