Nanoscale Temperature Distributions Measured by Scanning Joule Expansion Microscopy

Nanoscale Temperature Distributions Measured by Scanning Joule Expansion Microscopy. Majumdar, A. & Varesi, J. Journal of Heat Transfer, 120:297-305, May 1, 1998, 1998.

Paper abstract bibtex

This paper introduces scanning Joule expansion microscopy (SJEM), which is a new thermal imaging technique with lateral resolution in the range of 10–50 nm. Based on the atomic force microscope (AFM), SJEM measures the thermal expansion of Joule-heated elements with a vertical resolution of 1 pm, and provides an expansion map of the scanned sample. Sunmicron metal interconnect lines as well as 50-nm-sized single grains of an indium tin oxide resistor were images using SJEM. Since the local expansion signal is a convolution of local material properties, sample height, and as temperature rise, extraction of the thermal image requires deconvolution. This was experimentally achieved by coating the sample with a uniformly thick polymer film, resulting in direct measurement of the sample temperature distribution. A detailed thermal analysis of the metal wire and the substrate showed that the predicted temperature distribution was in good agreement with the measurements of the polymer-coated sample. However, the frequency response of the expansion signal agreed with theoretical predictions only below 30 KHZ, suggesting that contilever dynamics may play a significant role at higher frequencies. The major advantage of SJEM over previously developed submicron thermal imaging techniques is that it eliminates the need to nanofabricate specialized probes and requires only a standard AFM and simple electronics.

@article {827,
	title = {Nanoscale Temperature Distributions Measured by Scanning Joule Expansion Microscopy},
	journal = {Journal of Heat Transfer},
	volume = {120},
	year = {1998},
	month = {May 1, 1998},
	pages = {297-305},
	abstract = {This paper introduces scanning Joule expansion microscopy (SJEM), which is a new thermal imaging technique with lateral resolution in the range of 10{\textendash}50 nm. Based on the atomic force microscope (AFM), SJEM measures the thermal expansion of Joule-heated elements with a vertical resolution of 1 pm, and provides an expansion map of the scanned sample. Sunmicron metal interconnect lines as well as 50-nm-sized single grains of an indium tin oxide resistor were images using SJEM. Since the local expansion signal is a convolution of local material properties, sample height, and as temperature rise, extraction of the thermal image requires deconvolution. This was experimentally achieved by coating the sample with a uniformly thick polymer film, resulting in direct measurement of the sample temperature distribution. A detailed thermal analysis of the metal wire and the substrate showed that the predicted temperature distribution was in good agreement with the measurements of the polymer-coated sample. However, the frequency response of the expansion signal agreed with theoretical predictions only below 30 KHZ, suggesting that contilever dynamics may play a significant role at higher frequencies. The major advantage of SJEM over previously developed submicron thermal imaging techniques is that it eliminates the need to nanofabricate specialized probes and requires only a standard AFM and simple electronics.},
	isbn = {0022-1481},
	url = {http://dx.doi.org/10.1115/1.2824245},
	author = {Majumdar, A. and Varesi, J.}
}

Downloads: 0