Model Magnet Development of D1 Beam Separation Dipole for the HL-LHC Upgrade. Nakamoto, T., Sugano, M., Xu, Q., Kawamata, H., Enomoto, S., Higashi, N., Idesaki, A., Iio, M., Ikemoto, Y., Iwasaki, R., Kimura, N., Ogitsu, T., Okada, N., Sasaki, K. i., Yoshida, M., & Todesco, E. *IEEE Transactions on Applied Superconductivity*, 25(3):1–5, June, 2015. doi abstract bibtex KEK has been conducting the design study of the beam separation dipole magnet, D1, for the High Luminosity LHC (HL-LHC) upgrade within a framework of the CERN-KEK collaboration. The D1 magnet has a coil aperture of 150 mm using Nb-Ti superconducting cable and the nominal dipole field of 5.6 T can be generated at 12 kA and 1.9 K. A field integral of 35 T·m is required. The development of the 2-m-long model magnet has been started since May 2013. This paper describes the development status of the short model magnet as well as advancement of the fundamental design studies.

@Article{ Nakamoto_2015aa,
abstract = {KEK has been conducting the design study of the beam separation dipole magnet, D1, for the High Luminosity LHC (HL-LHC) upgrade within a framework of the CERN-KEK collaboration. The D1 magnet has a coil aperture of 150 mm using Nb-Ti superconducting cable and the nominal dipole field of 5.6 T can be generated at 12 kA and 1.9 K. A field integral of 35 T·m is required. The development of the 2-m-long model magnet has been started since May 2013. This paper describes the development status of the short model magnet as well as advancement of the fundamental design studies.},
author = {Nakamoto, T. and Sugano, M. and Xu, Q. and Kawamata, H. and Enomoto, S. and Higashi, N. and Idesaki, A. and Iio, M. and Ikemoto, Y. and Iwasaki, R. and Kimura, N. and Ogitsu, T. and Okada, N. and Sasaki, K. i. and Yoshida, M. and Todesco, E.},
doi = {10.1109/TASC.2014.2361404},
file = {Nakamoto_2015aa.pdf},
issn = {1051-8223},
journal = {IEEE Transactions on Applied Superconductivity},
keywords = {superconducting,magnet,cern},
month = jun,
number = {3},
pages = {1--5},
title = {Model Magnet Development of D1 Beam Separation Dipole for the {HL}-{LHC} Upgrade},
volume = {25},
year = {2015},
shortjournal = {IEEE Trans. Appl. Super.}
}

Downloads: 0

{"_id":"2CyBSJrcNwSPWPm9m","bibbaseid":"nakamoto-sugano-xu-kawamata-enomoto-higashi-idesaki-iio-etal-modelmagnetdevelopmentofd1beamseparationdipoleforthehllhcupgrade-2015","authorIDs":[],"author_short":["Nakamoto, T.","Sugano, M.","Xu, Q.","Kawamata, H.","Enomoto, S.","Higashi, N.","Idesaki, A.","Iio, M.","Ikemoto, Y.","Iwasaki, R.","Kimura, N.","Ogitsu, T.","Okada, N.","Sasaki, K. i.","Yoshida, M.","Todesco, E."],"bibdata":{"bibtype":"article","type":"article","abstract":"KEK has been conducting the design study of the beam separation dipole magnet, D1, for the High Luminosity LHC (HL-LHC) upgrade within a framework of the CERN-KEK collaboration. The D1 magnet has a coil aperture of 150 mm using Nb-Ti superconducting cable and the nominal dipole field of 5.6 T can be generated at 12 kA and 1.9 K. A field integral of 35 T·m is required. The development of the 2-m-long model magnet has been started since May 2013. This paper describes the development status of the short model magnet as well as advancement of the fundamental design studies.","author":[{"propositions":[],"lastnames":["Nakamoto"],"firstnames":["T."],"suffixes":[]},{"propositions":[],"lastnames":["Sugano"],"firstnames":["M."],"suffixes":[]},{"propositions":[],"lastnames":["Xu"],"firstnames":["Q."],"suffixes":[]},{"propositions":[],"lastnames":["Kawamata"],"firstnames":["H."],"suffixes":[]},{"propositions":[],"lastnames":["Enomoto"],"firstnames":["S."],"suffixes":[]},{"propositions":[],"lastnames":["Higashi"],"firstnames":["N."],"suffixes":[]},{"propositions":[],"lastnames":["Idesaki"],"firstnames":["A."],"suffixes":[]},{"propositions":[],"lastnames":["Iio"],"firstnames":["M."],"suffixes":[]},{"propositions":[],"lastnames":["Ikemoto"],"firstnames":["Y."],"suffixes":[]},{"propositions":[],"lastnames":["Iwasaki"],"firstnames":["R."],"suffixes":[]},{"propositions":[],"lastnames":["Kimura"],"firstnames":["N."],"suffixes":[]},{"propositions":[],"lastnames":["Ogitsu"],"firstnames":["T."],"suffixes":[]},{"propositions":[],"lastnames":["Okada"],"firstnames":["N."],"suffixes":[]},{"propositions":[],"lastnames":["Sasaki"],"firstnames":["K.","i."],"suffixes":[]},{"propositions":[],"lastnames":["Yoshida"],"firstnames":["M."],"suffixes":[]},{"propositions":[],"lastnames":["Todesco"],"firstnames":["E."],"suffixes":[]}],"doi":"10.1109/TASC.2014.2361404","file":"Nakamoto_2015aa.pdf","issn":"1051-8223","journal":"IEEE Transactions on Applied Superconductivity","keywords":"superconducting,magnet,cern","month":"June","number":"3","pages":"1–5","title":"Model Magnet Development of D1 Beam Separation Dipole for the HL-LHC Upgrade","volume":"25","year":"2015","shortjournal":"IEEE Trans. Appl. Super.","bibtex":"@Article{ Nakamoto_2015aa,\n abstract = {KEK has been conducting the design study of the beam separation dipole magnet, D1, for the High Luminosity LHC (HL-LHC) upgrade within a framework of the CERN-KEK collaboration. The D1 magnet has a coil aperture of 150 mm using Nb-Ti superconducting cable and the nominal dipole field of 5.6 T can be generated at 12 kA and 1.9 K. A field integral of 35 T·m is required. The development of the 2-m-long model magnet has been started since May 2013. This paper describes the development status of the short model magnet as well as advancement of the fundamental design studies.},\n author = {Nakamoto, T. and Sugano, M. and Xu, Q. and Kawamata, H. and Enomoto, S. and Higashi, N. and Idesaki, A. and Iio, M. and Ikemoto, Y. and Iwasaki, R. and Kimura, N. and Ogitsu, T. and Okada, N. and Sasaki, K. i. and Yoshida, M. and Todesco, E.},\n doi = {10.1109/TASC.2014.2361404},\n file = {Nakamoto_2015aa.pdf},\n issn = {1051-8223},\n journal = {IEEE Transactions on Applied Superconductivity},\n keywords = {superconducting,magnet,cern},\n month = jun,\n number = {3},\n pages = {1--5},\n title = {Model Magnet Development of D1 Beam Separation Dipole for the {HL}-{LHC} Upgrade},\n volume = {25},\n year = {2015},\n shortjournal = {IEEE Trans. Appl. Super.}\n}\n\n","author_short":["Nakamoto, T.","Sugano, M.","Xu, Q.","Kawamata, H.","Enomoto, S.","Higashi, N.","Idesaki, A.","Iio, M.","Ikemoto, Y.","Iwasaki, R.","Kimura, N.","Ogitsu, T.","Okada, N.","Sasaki, K. i.","Yoshida, M.","Todesco, E."],"key":"Nakamoto_2015aa","id":"Nakamoto_2015aa","bibbaseid":"nakamoto-sugano-xu-kawamata-enomoto-higashi-idesaki-iio-etal-modelmagnetdevelopmentofd1beamseparationdipoleforthehllhcupgrade-2015","role":"author","urls":{},"keyword":["superconducting","magnet","cern"],"downloads":0,"html":""},"bibtype":"article","biburl":"http://dl.schoeps.org/database.bib","creationDate":"2019-12-26T16:51:17.722Z","downloads":0,"keywords":["superconducting","magnet","cern"],"search_terms":["model","magnet","development","beam","separation","dipole","lhc","upgrade","nakamoto","sugano","xu","kawamata","enomoto","higashi","idesaki","iio","ikemoto","iwasaki","kimura","ogitsu","okada","sasaki","yoshida","todesco"],"title":"Model Magnet Development of D1 Beam Separation Dipole for the HL-LHC Upgrade","year":2015,"dataSources":["P4aBgbzF45TWvxzbZ"]}