ARTIFICIAL NEURAL NETWORK BASED FAULT DIAGNOSTICS OF ROLLING ELEMENT BEARINGS USING TIME-DOMAIN FEATURES. Samanta, B. & Al-balushi, K. R. Mechanical Systems and Signal Processing, 17(2):317–328, March, 2003. Paper doi abstract bibtex A procedure is presented for fault diagnosis of rolling element bearings through artificial neural network (ANN). The characteristic features of time-domain vibration signals of the rotating machinery with normal and defective bearings have been used as inputs to the ANN consisting of input, hidden and output layers. The features are obtained from direct processing of the signal segments using very simple preprocessing. The input layer consists of five nodes, one each for root mean square, variance, skewness, kurtosis and normalised sixth central moment of the time-domain vibration signals. The inputs are normalised in the range of 0.0 and 1.0 except for the skewness which is normalised between −1.0 and 1.0. The output layer consists of two binary nodes indicating the status of the machine—normal or defective bearings. Two hidden layers with different number of neurons have been used. The ANN is trained using backpropagation algorithm with a subset of the experimental data for known machine conditions. The ANN is tested using the remaining set of data. The effects of some preprocessing techniques like high-pass, band-pass filtration, envelope detection (demodulation) and wavelet transform of the vibration signals, prior to feature extraction, are also studied. The results show the effectiveness of the ANN in diagnosis of the machine condition. The proposed procedure requires only a few features extracted from the measured vibration data either directly or with simple preprocessing. The reduced number of inputs leads to faster training requiring far less iterations making the procedure suitable for on-line condition monitoring and diagnostics of machines.
@article{samanta_artificial_2003,
title = {{ARTIFICIAL} {NEURAL} {NETWORK} {BASED} {FAULT} {DIAGNOSTICS} {OF} {ROLLING} {ELEMENT} {BEARINGS} {USING} {TIME}-{DOMAIN} {FEATURES}},
volume = {17},
issn = {0888-3270},
url = {https://www.sciencedirect.com/science/article/pii/S0888327001914621},
doi = {10.1006/mssp.2001.1462},
abstract = {A procedure is presented for fault diagnosis of rolling element bearings through artificial neural network (ANN). The characteristic features of time-domain vibration signals of the rotating machinery with normal and defective bearings have been used as inputs to the ANN consisting of input, hidden and output layers. The features are obtained from direct processing of the signal segments using very simple preprocessing. The input layer consists of five nodes, one each for root mean square, variance, skewness, kurtosis and normalised sixth central moment of the time-domain vibration signals. The inputs are normalised in the range of 0.0 and 1.0 except for the skewness which is normalised between −1.0 and 1.0. The output layer consists of two binary nodes indicating the status of the machine—normal or defective bearings. Two hidden layers with different number of neurons have been used. The ANN is trained using backpropagation algorithm with a subset of the experimental data for known machine conditions. The ANN is tested using the remaining set of data. The effects of some preprocessing techniques like high-pass, band-pass filtration, envelope detection (demodulation) and wavelet transform of the vibration signals, prior to feature extraction, are also studied. The results show the effectiveness of the ANN in diagnosis of the machine condition. The proposed procedure requires only a few features extracted from the measured vibration data either directly or with simple preprocessing. The reduced number of inputs leads to faster training requiring far less iterations making the procedure suitable for on-line condition monitoring and diagnostics of machines.},
language = {en},
number = {2},
urldate = {2021-09-30},
journal = {Mechanical Systems and Signal Processing},
author = {Samanta, B. and Al-balushi, K. R.},
month = mar,
year = {2003},
pages = {317--328},
}
Downloads: 0
{"_id":"eW4LRHSjR7PkvRX9g","bibbaseid":"samanta-albalushi-artificialneuralnetworkbasedfaultdiagnosticsofrollingelementbearingsusingtimedomainfeatures-2003","author_short":["Samanta, B.","Al-balushi, K. R."],"bibdata":{"bibtype":"article","type":"article","title":"ARTIFICIAL NEURAL NETWORK BASED FAULT DIAGNOSTICS OF ROLLING ELEMENT BEARINGS USING TIME-DOMAIN FEATURES","volume":"17","issn":"0888-3270","url":"https://www.sciencedirect.com/science/article/pii/S0888327001914621","doi":"10.1006/mssp.2001.1462","abstract":"A procedure is presented for fault diagnosis of rolling element bearings through artificial neural network (ANN). The characteristic features of time-domain vibration signals of the rotating machinery with normal and defective bearings have been used as inputs to the ANN consisting of input, hidden and output layers. The features are obtained from direct processing of the signal segments using very simple preprocessing. The input layer consists of five nodes, one each for root mean square, variance, skewness, kurtosis and normalised sixth central moment of the time-domain vibration signals. The inputs are normalised in the range of 0.0 and 1.0 except for the skewness which is normalised between −1.0 and 1.0. The output layer consists of two binary nodes indicating the status of the machine—normal or defective bearings. Two hidden layers with different number of neurons have been used. The ANN is trained using backpropagation algorithm with a subset of the experimental data for known machine conditions. The ANN is tested using the remaining set of data. The effects of some preprocessing techniques like high-pass, band-pass filtration, envelope detection (demodulation) and wavelet transform of the vibration signals, prior to feature extraction, are also studied. The results show the effectiveness of the ANN in diagnosis of the machine condition. The proposed procedure requires only a few features extracted from the measured vibration data either directly or with simple preprocessing. The reduced number of inputs leads to faster training requiring far less iterations making the procedure suitable for on-line condition monitoring and diagnostics of machines.","language":"en","number":"2","urldate":"2021-09-30","journal":"Mechanical Systems and Signal Processing","author":[{"propositions":[],"lastnames":["Samanta"],"firstnames":["B."],"suffixes":[]},{"propositions":[],"lastnames":["Al-balushi"],"firstnames":["K.","R."],"suffixes":[]}],"month":"March","year":"2003","pages":"317–328","bibtex":"@article{samanta_artificial_2003,\n\ttitle = {{ARTIFICIAL} {NEURAL} {NETWORK} {BASED} {FAULT} {DIAGNOSTICS} {OF} {ROLLING} {ELEMENT} {BEARINGS} {USING} {TIME}-{DOMAIN} {FEATURES}},\n\tvolume = {17},\n\tissn = {0888-3270},\n\turl = {https://www.sciencedirect.com/science/article/pii/S0888327001914621},\n\tdoi = {10.1006/mssp.2001.1462},\n\tabstract = {A procedure is presented for fault diagnosis of rolling element bearings through artificial neural network (ANN). The characteristic features of time-domain vibration signals of the rotating machinery with normal and defective bearings have been used as inputs to the ANN consisting of input, hidden and output layers. The features are obtained from direct processing of the signal segments using very simple preprocessing. The input layer consists of five nodes, one each for root mean square, variance, skewness, kurtosis and normalised sixth central moment of the time-domain vibration signals. The inputs are normalised in the range of 0.0 and 1.0 except for the skewness which is normalised between −1.0 and 1.0. The output layer consists of two binary nodes indicating the status of the machine—normal or defective bearings. Two hidden layers with different number of neurons have been used. The ANN is trained using backpropagation algorithm with a subset of the experimental data for known machine conditions. The ANN is tested using the remaining set of data. The effects of some preprocessing techniques like high-pass, band-pass filtration, envelope detection (demodulation) and wavelet transform of the vibration signals, prior to feature extraction, are also studied. The results show the effectiveness of the ANN in diagnosis of the machine condition. The proposed procedure requires only a few features extracted from the measured vibration data either directly or with simple preprocessing. The reduced number of inputs leads to faster training requiring far less iterations making the procedure suitable for on-line condition monitoring and diagnostics of machines.},\n\tlanguage = {en},\n\tnumber = {2},\n\turldate = {2021-09-30},\n\tjournal = {Mechanical Systems and Signal Processing},\n\tauthor = {Samanta, B. and Al-balushi, K. R.},\n\tmonth = mar,\n\tyear = {2003},\n\tpages = {317--328},\n}\n\n\n\n","author_short":["Samanta, B.","Al-balushi, K. R."],"key":"samanta_artificial_2003","id":"samanta_artificial_2003","bibbaseid":"samanta-albalushi-artificialneuralnetworkbasedfaultdiagnosticsofrollingelementbearingsusingtimedomainfeatures-2003","role":"author","urls":{"Paper":"https://www.sciencedirect.com/science/article/pii/S0888327001914621"},"metadata":{"authorlinks":{}},"html":""},"bibtype":"article","biburl":"https://bibbase.org/zotero/mh_lenguyen","dataSources":["iwKepCrWBps7ojhDx"],"keywords":[],"search_terms":["artificial","neural","network","based","fault","diagnostics","rolling","element","bearings","using","time","domain","features","samanta","al-balushi"],"title":"ARTIFICIAL NEURAL NETWORK BASED FAULT DIAGNOSTICS OF ROLLING ELEMENT BEARINGS USING TIME-DOMAIN FEATURES","year":2003}