Thermal three-dimensional lithography in thermoset resins using CO2 laser. Scarparo, M., A., F., Barros, M., L., Kiel, A., E., & Gerck, E. In volume 2125, pages 355-362, 1994.
Thermal three-dimensional lithography in thermoset resins using CO2 laser [link]Website  abstract   bibtex   
This work presents a new method to produce 3D structures, using a CO2 laser and thermosensitive resins. This method is called thermal stereolithography and is based on the spatially selective thermal curing of a resin, a filling material and a catalyst. The results obtained with a physical model for the resin system indicates that filling material must be added to control a pressure wave that is thermally induced. A resolution of 0.1 mm was achieved for epoxy and polyester resins. The successive layering of a laser scanned spot can produce 3D solid structures out of a high viscosity liquid.
@inProceedings{
 title = {Thermal three-dimensional lithography in thermoset resins using CO2 laser},
 type = {inProceedings},
 year = {1994},
 pages = {355-362},
 volume = {2125},
 websites = {http://dx.doi.org/10.1117/12.180832},
 id = {b5f1e7e6-df50-3974-bd97-5de210143dd5},
 created = {2016-06-24T20:49:20.000Z},
 file_attached = {false},
 profile_id = {954a987f-819f-3985-95a4-2991e0cf0552},
 group_id = {8440dcff-74cc-3783-aef7-fe2749cfc7ef},
 last_modified = {2016-06-24T20:49:20.000Z},
 read = {false},
 starred = {false},
 authored = {false},
 confirmed = {true},
 hidden = {false},
 citation_key = {Scarparo1994},
 source_type = {CONF},
 abstract = {This work presents a new method to produce 3D structures, using a CO2 laser and thermosensitive resins. This method is called thermal stereolithography and is based on the spatially selective thermal curing of a resin, a filling material and a catalyst. The results obtained with a physical model for the resin system indicates that filling material must be added to control a pressure wave that is thermally induced. A resolution of 0.1 mm was achieved for epoxy and polyester resins. The successive layering of a laser scanned spot can produce 3D solid structures out of a high viscosity liquid.},
 bibtype = {inProceedings},
 author = {Scarparo, Marco A F and Barros, Mucio L and Kiel, Alvin E and Gerck, Edgardo}
}

Downloads: 0