Influence of interfaces on the mechanical behavior of SiC particulate-reinforced Al–Zn–Mg–Cu composites. Song, J., Guo, Q., Ouyang, Q., Su, Y., Zhang, J., Lavernia, E. J., Schoenung, J. M., & Zhang, D. Materials Science and Engineering: A, 644(Supplement C):79–84, September, 2015.
Influence of interfaces on the mechanical behavior of SiC particulate-reinforced Al–Zn–Mg–Cu composites [link]Paper  doi  abstract   bibtex   
In particulate-reinforced metal matrix composites (MMCs), geometrically necessary dislocations (GNDs) form in the vicinity of reinforcement/matrix interfaces. In this study, the hardness distribution across the interface was studied using nanoindentation with high spatial resolution, for composites treated under different aging conditions. The size of the GND punched zone, as determined from the hardness measurement, was found to be in agreement with that estimated by transmission electron microscopy (TEM). Mechanical characterization of bulk composites revealed a reduction in failure strain with decreasing punched zone size, while the strength of the composites was found to depend more on the intrinsic strength of the matrix alloy. These observations were interpreted in terms of the load transfer capacity between the matrix and reinforcement through the interface.
@article{song_influence_2015,
	title = {Influence of interfaces on the mechanical behavior of {SiC} particulate-reinforced {Al}–{Zn}–{Mg}–{Cu} composites},
	volume = {644},
	issn = {0921-5093},
	url = {http://www.sciencedirect.com/science/article/pii/S0921509315302021},
	doi = {10.1016/j.msea.2015.07.050},
	abstract = {In particulate-reinforced metal matrix composites (MMCs), geometrically necessary dislocations (GNDs) form in the vicinity of reinforcement/matrix interfaces. In this study, the hardness distribution across the interface was studied using nanoindentation with high spatial resolution, for composites treated under different aging conditions. The size of the GND punched zone, as determined from the hardness measurement, was found to be in agreement with that estimated by transmission electron microscopy (TEM). Mechanical characterization of bulk composites revealed a reduction in failure strain with decreasing punched zone size, while the strength of the composites was found to depend more on the intrinsic strength of the matrix alloy. These observations were interpreted in terms of the load transfer capacity between the matrix and reinforcement through the interface.},
	number = {Supplement C},
	urldate = {2018-01-08},
	journal = {Materials Science and Engineering: A},
	author = {Song, Jingya and Guo, Qiang and Ouyang, Qiubao and Su, Yishi and Zhang, Jie and Lavernia, Enrique J. and Schoenung, Julie M. and Zhang, Di},
	month = sep,
	year = {2015},
	keywords = {Aging, Dislocation distribution, Interface structure, Metal matrix composites, Nanoindentation, Published, Reviewed},
	pages = {79--84},
}

Downloads: 0