@phdthesis{RN333,
   author = {Vestlund, Karin},
   title = {Aspects of automation of selective cleaning},
   university = {Sveriges lantbruksuniversitet},
   abstract = {Cleaning (pre-commercial thinning) is a silvicultural operation, primarily used to improve growing conditions of remaining trees in young stands (ca. 3 - 5 m of height). Cleaning costs are considered high in Sweden and the work is laborious. Selective cleaning with autonomous artificial agents (robots) may rationalise the work, but requires new knowledge. This thesis aims to analyse key issues regarding automation of cleaning; suggesting general solutions and focusing on automatic selection of main-stems. The essential requests put on cleaning robots are to render acceptable results and to be cost competitive. They must be safe and be able to operate independently and unattended for several hours in a dynamic and non-deterministic environment. Machine vision, radar, and laser scanners are promising techniques for obstacle avoidance, tree identification, and tool control. Horizontal laser scannings were made, demonstrating the possibility to find stems and make estimations regarding their height and diameter. Knowledge regarding stem selections was retrieved through qualitative interviews with persons performing cleaning. They consider similar attributes of trees, and these findings and current cleaning manuals were used in combination with a field inventory in the development of a decision support system (DSS). The DSS selects stems by the attributes species, position, diameter, and damage. It was used to run computer-based simulations in a variety of young forests. A general follow-up showed that the DSS produced acceptable results. The DSS was further evaluated by comparing its selections with those made by experienced cleaners, and by a test in which laymen performed cleanings following the system. The DSS seems to be useful and flexible, since it can be adjusted in accordance with the cleaners’ results. The laymen’s results implied that the DSS is robust and that it could be used as a training tool. Using the DSS in automatic, or semi-automatic, cleaning operations should be possible if and when selected attributes can be automatically perceived. A suitable base-machine and thorough research, regarding e.g. safety, obstacle avoidance, and target identification, is needed to develop competitive robots. However, using the DSS as a training-tool for inexperienced cleaners could be an interesting option as of today.},
   keywords = {autonomous off-road vehicle, decision support system, interviews, robot, pre-commercial thinning, simulations, training-tool},
   url = {http://urn.kb.se/resolve?urn=urn:nbn:se:slu:epsilon-697},
   year = {2005},
   type = {Thesis}
}

{"_id":"yhcRdxM3e2cbcep5o","bibbaseid":"vestlund-aspectsofautomationofselectivecleaning-2005","author_short":["Vestlund, K."],"bibdata":{"bibtype":"phdthesis","type":"Thesis","author":[{"propositions":[],"lastnames":["Vestlund"],"firstnames":["Karin"],"suffixes":[]}],"title":"Aspects of automation of selective cleaning","university":"Sveriges lantbruksuniversitet","abstract":"Cleaning (pre-commercial thinning) is a silvicultural operation, primarily used to improve growing conditions of remaining trees in young stands (ca. 3 - 5 m of height). Cleaning costs are considered high in Sweden and the work is laborious. Selective cleaning with autonomous artificial agents (robots) may rationalise the work, but requires new knowledge. This thesis aims to analyse key issues regarding automation of cleaning; suggesting general solutions and focusing on automatic selection of main-stems. The essential requests put on cleaning robots are to render acceptable results and to be cost competitive. They must be safe and be able to operate independently and unattended for several hours in a dynamic and non-deterministic environment. Machine vision, radar, and laser scanners are promising techniques for obstacle avoidance, tree identification, and tool control. Horizontal laser scannings were made, demonstrating the possibility to find stems and make estimations regarding their height and diameter. Knowledge regarding stem selections was retrieved through qualitative interviews with persons performing cleaning. They consider similar attributes of trees, and these findings and current cleaning manuals were used in combination with a field inventory in the development of a decision support system (DSS). The DSS selects stems by the attributes species, position, diameter, and damage. It was used to run computer-based simulations in a variety of young forests. A general follow-up showed that the DSS produced acceptable results. The DSS was further evaluated by comparing its selections with those made by experienced cleaners, and by a test in which laymen performed cleanings following the system. The DSS seems to be useful and flexible, since it can be adjusted in accordance with the cleaners’ results. The laymen’s results implied that the DSS is robust and that it could be used as a training tool. Using the DSS in automatic, or semi-automatic, cleaning operations should be possible if and when selected attributes can be automatically perceived. A suitable base-machine and thorough research, regarding e.g. safety, obstacle avoidance, and target identification, is needed to develop competitive robots. However, using the DSS as a training-tool for inexperienced cleaners could be an interesting option as of today.","keywords":"autonomous off-road vehicle, decision support system, interviews, robot, pre-commercial thinning, simulations, training-tool","url":"http://urn.kb.se/resolve?urn=urn:nbn:se:slu:epsilon-697","year":"2005","bibtex":"@phdthesis{RN333,\r\n author = {Vestlund, Karin},\r\n title = {Aspects of automation of selective cleaning},\r\n university = {Sveriges lantbruksuniversitet},\r\n abstract = {Cleaning (pre-commercial thinning) is a silvicultural operation, primarily used to improve growing conditions of remaining trees in young stands (ca. 3 - 5 m of height). Cleaning costs are considered high in Sweden and the work is laborious. Selective cleaning with autonomous artificial agents (robots) may rationalise the work, but requires new knowledge. This thesis aims to analyse key issues regarding automation of cleaning; suggesting general solutions and focusing on automatic selection of main-stems. The essential requests put on cleaning robots are to render acceptable results and to be cost competitive. They must be safe and be able to operate independently and unattended for several hours in a dynamic and non-deterministic environment. Machine vision, radar, and laser scanners are promising techniques for obstacle avoidance, tree identification, and tool control. Horizontal laser scannings were made, demonstrating the possibility to find stems and make estimations regarding their height and diameter. Knowledge regarding stem selections was retrieved through qualitative interviews with persons performing cleaning. They consider similar attributes of trees, and these findings and current cleaning manuals were used in combination with a field inventory in the development of a decision support system (DSS). The DSS selects stems by the attributes species, position, diameter, and damage. It was used to run computer-based simulations in a variety of young forests. A general follow-up showed that the DSS produced acceptable results. The DSS was further evaluated by comparing its selections with those made by experienced cleaners, and by a test in which laymen performed cleanings following the system. The DSS seems to be useful and flexible, since it can be adjusted in accordance with the cleaners’ results. The laymen’s results implied that the DSS is robust and that it could be used as a training tool. Using the DSS in automatic, or semi-automatic, cleaning operations should be possible if and when selected attributes can be automatically perceived. A suitable base-machine and thorough research, regarding e.g. safety, obstacle avoidance, and target identification, is needed to develop competitive robots. However, using the DSS as a training-tool for inexperienced cleaners could be an interesting option as of today.},\r\n keywords = {autonomous off-road vehicle, decision support system, interviews, robot, pre-commercial thinning, simulations, training-tool},\r\n url = {http://urn.kb.se/resolve?urn=urn:nbn:se:slu:epsilon-697},\r\n year = {2005},\r\n type = {Thesis}\r\n}\r\n\r\n","author_short":["Vestlund, K."],"key":"RN333","id":"RN333","bibbaseid":"vestlund-aspectsofautomationofselectivecleaning-2005","role":"author","urls":{"Paper":"http://urn.kb.se/resolve?urn=urn:nbn:se:slu:epsilon-697"},"keyword":["autonomous off-road vehicle","decision support system","interviews","robot","pre-commercial thinning","simulations","training-tool"],"metadata":{"authorlinks":{}}},"bibtype":"phdthesis","biburl":"https://www.slu.se/globalassets/ew/org/centrb/rt/dokument/publikationslistor/rikskogstaxeringsprojektet_bibtex_ny.txt","dataSources":["Cac5nog9ND5ndLYhY","xTmt4jq9swAwpBHJB","LXbacBrgTRDPkh9C2","dLPsL5XH9N5Pjush7"],"keywords":["autonomous off-road vehicle","decision support system","interviews","robot","pre-commercial thinning","simulations","training-tool"],"search_terms":["aspects","automation","selective","cleaning","vestlund"],"title":"Aspects of automation of selective cleaning","year":2005}