3D Microstructure-based finite element modeling of deformation and fracture of SiCp/Al composites. Zhang, J., Ouyang, Q., Guo, Q., Li, Z., Fan, G., Su, Y., Jiang, L., Lavernia, E. J., Schoenung, J. M., & Zhang, D. Composites Science and Technology, 123(Supplement C):1–9, February, 2016. ![3D Microstructure-based finite element modeling of deformation and fracture of SiCp/Al composites [link]](https://bibbase.org/img/filetypes/link.svg "link")
Paper doi abstract bibtex The mechanical behavior, with particular emphasis on the damage mechanisms, of SiCp/Al composites was studied by both experiments and finite element analysis in this paper. A 3D microstructure-based finite element model was developed to predict the elasto-plastic response and fracture behavior of a 7vol.% SiCp/Al composite. The 3D microstructure of SiCp/Al composite was reconstructed by implementing a Camisizer XT particle size analysis device and a random sequential adsorption algorithm. The constitutive behavior of the elastoplastic-damage in the metal matrix, the elastic-brittle failure for the particle reinforcement, and the traction-separation for interfaces, were independently simulated in this model. The validity of the modeling results were validated by the agreement of the experimental stress-strain curve and the morphology of fracture section with those predicted by the simulation. The visual elasto-plastic deformation process, along with crack generation and propagation was well simulated in this model. The numerical results were used to provide insight into the damage mechanisms of SiCp/Al composites, and the effects of interfacial strength and particle strength on material properties were also discussed in detail.
@article{zhang_3d_2016,
title = {{3D} {Microstructure}-based finite element modeling of deformation and fracture of {SiCp}/{Al} composites},
volume = {123},
issn = {0266-3538},
url = {http://www.sciencedirect.com/science/article/pii/S0266353815301342},
doi = {10.1016/j.compscitech.2015.11.014},
abstract = {The mechanical behavior, with particular emphasis on the damage mechanisms, of SiCp/Al composites was studied by both experiments and finite element analysis in this paper. A 3D microstructure-based finite element model was developed to predict the elasto-plastic response and fracture behavior of a 7vol.\% SiCp/Al composite. The 3D microstructure of SiCp/Al composite was reconstructed by implementing a Camisizer XT particle size analysis device and a random sequential adsorption algorithm. The constitutive behavior of the elastoplastic-damage in the metal matrix, the elastic-brittle failure for the particle reinforcement, and the traction-separation for interfaces, were independently simulated in this model. The validity of the modeling results were validated by the agreement of the experimental stress-strain curve and the morphology of fracture section with those predicted by the simulation. The visual elasto-plastic deformation process, along with crack generation and propagation was well simulated in this model. The numerical results were used to provide insight into the damage mechanisms of SiCp/Al composites, and the effects of interfacial strength and particle strength on material properties were also discussed in detail.},
number = {Supplement C},
urldate = {2018-01-08},
journal = {Composites Science and Technology},
author = {Zhang, Jie and Ouyang, Qiubao and Guo, Qiang and Li, Zhiqiang and Fan, Genlian and Su, Yishi and Jiang, Lin and Lavernia, Enrique J. and Schoenung, Julie M. and Zhang, Di},
month = feb,
year = {2016},
keywords = {Damage mechanics, Finite element analysis (FEA), Interfacial strength, Metal-matrix composites (MMCs), Published, Reviewed},
pages = {1--9},
}
Downloads: 0
{"_id":"9BG4JdEtNpsiqGau6","bibbaseid":"zhang-ouyang-guo-li-fan-su-jiang-lavernia-etal-3dmicrostructurebasedfiniteelementmodelingofdeformationandfractureofsicpalcomposites-2016","downloads":0,"creationDate":"2018-01-30T21:09:09.984Z","title":"3D Microstructure-based finite element modeling of deformation and fracture of SiCp/Al composites","author_short":["Zhang, J.","Ouyang, Q.","Guo, Q.","Li, Z.","Fan, G.","Su, Y.","Jiang, L.","Lavernia, E. J.","Schoenung, J. M.","Zhang, D."],"year":2016,"bibtype":"article","biburl":"https://api.zotero.org/users/4671851/collections/XXZ2J5VG/items?key=vvOULaCMZpmPfaYPyYLTHkeL&format=bibtex&limit=100","bibdata":{"bibtype":"article","type":"article","title":"3D Microstructure-based finite element modeling of deformation and fracture of SiCp/Al composites","volume":"123","issn":"0266-3538","url":"http://www.sciencedirect.com/science/article/pii/S0266353815301342","doi":"10.1016/j.compscitech.2015.11.014","abstract":"The mechanical behavior, with particular emphasis on the damage mechanisms, of SiCp/Al composites was studied by both experiments and finite element analysis in this paper. A 3D microstructure-based finite element model was developed to predict the elasto-plastic response and fracture behavior of a 7vol.% SiCp/Al composite. The 3D microstructure of SiCp/Al composite was reconstructed by implementing a Camisizer XT particle size analysis device and a random sequential adsorption algorithm. The constitutive behavior of the elastoplastic-damage in the metal matrix, the elastic-brittle failure for the particle reinforcement, and the traction-separation for interfaces, were independently simulated in this model. The validity of the modeling results were validated by the agreement of the experimental stress-strain curve and the morphology of fracture section with those predicted by the simulation. The visual elasto-plastic deformation process, along with crack generation and propagation was well simulated in this model. The numerical results were used to provide insight into the damage mechanisms of SiCp/Al composites, and the effects of interfacial strength and particle strength on material properties were also discussed in detail.","number":"Supplement C","urldate":"2018-01-08","journal":"Composites Science and Technology","author":[{"propositions":[],"lastnames":["Zhang"],"firstnames":["Jie"],"suffixes":[]},{"propositions":[],"lastnames":["Ouyang"],"firstnames":["Qiubao"],"suffixes":[]},{"propositions":[],"lastnames":["Guo"],"firstnames":["Qiang"],"suffixes":[]},{"propositions":[],"lastnames":["Li"],"firstnames":["Zhiqiang"],"suffixes":[]},{"propositions":[],"lastnames":["Fan"],"firstnames":["Genlian"],"suffixes":[]},{"propositions":[],"lastnames":["Su"],"firstnames":["Yishi"],"suffixes":[]},{"propositions":[],"lastnames":["Jiang"],"firstnames":["Lin"],"suffixes":[]},{"propositions":[],"lastnames":["Lavernia"],"firstnames":["Enrique","J."],"suffixes":[]},{"propositions":[],"lastnames":["Schoenung"],"firstnames":["Julie","M."],"suffixes":[]},{"propositions":[],"lastnames":["Zhang"],"firstnames":["Di"],"suffixes":[]}],"month":"February","year":"2016","keywords":"Damage mechanics, Finite element analysis (FEA), Interfacial strength, Metal-matrix composites (MMCs), Published, Reviewed","pages":"1–9","bibtex":"@article{zhang_3d_2016,\n\ttitle = {{3D} {Microstructure}-based finite element modeling of deformation and fracture of {SiCp}/{Al} composites},\n\tvolume = {123},\n\tissn = {0266-3538},\n\turl = {http://www.sciencedirect.com/science/article/pii/S0266353815301342},\n\tdoi = {10.1016/j.compscitech.2015.11.014},\n\tabstract = {The mechanical behavior, with particular emphasis on the damage mechanisms, of SiCp/Al composites was studied by both experiments and finite element analysis in this paper. A 3D microstructure-based finite element model was developed to predict the elasto-plastic response and fracture behavior of a 7vol.\\% SiCp/Al composite. The 3D microstructure of SiCp/Al composite was reconstructed by implementing a Camisizer XT particle size analysis device and a random sequential adsorption algorithm. The constitutive behavior of the elastoplastic-damage in the metal matrix, the elastic-brittle failure for the particle reinforcement, and the traction-separation for interfaces, were independently simulated in this model. The validity of the modeling results were validated by the agreement of the experimental stress-strain curve and the morphology of fracture section with those predicted by the simulation. The visual elasto-plastic deformation process, along with crack generation and propagation was well simulated in this model. The numerical results were used to provide insight into the damage mechanisms of SiCp/Al composites, and the effects of interfacial strength and particle strength on material properties were also discussed in detail.},\n\tnumber = {Supplement C},\n\turldate = {2018-01-08},\n\tjournal = {Composites Science and Technology},\n\tauthor = {Zhang, Jie and Ouyang, Qiubao and Guo, Qiang and Li, Zhiqiang and Fan, Genlian and Su, Yishi and Jiang, Lin and Lavernia, Enrique J. and Schoenung, Julie M. and Zhang, Di},\n\tmonth = feb,\n\tyear = {2016},\n\tkeywords = {Damage mechanics, Finite element analysis (FEA), Interfacial strength, Metal-matrix composites (MMCs), Published, Reviewed},\n\tpages = {1--9},\n}\n\n","author_short":["Zhang, J.","Ouyang, Q.","Guo, Q.","Li, Z.","Fan, G.","Su, Y.","Jiang, L.","Lavernia, E. J.","Schoenung, J. M.","Zhang, D."],"key":"zhang_3d_2016","id":"zhang_3d_2016","bibbaseid":"zhang-ouyang-guo-li-fan-su-jiang-lavernia-etal-3dmicrostructurebasedfiniteelementmodelingofdeformationandfractureofsicpalcomposites-2016","role":"author","urls":{"Paper":"http://www.sciencedirect.com/science/article/pii/S0266353815301342"},"keyword":["Damage mechanics","Finite element analysis (FEA)","Interfacial strength","Metal-matrix composites (MMCs)","Published","Reviewed"],"metadata":{"authorlinks":{"schoenung, j":"https://bibbase.org/show?bib=https%3A%2F%2Fapi.zotero.org%2Fusers%2F4671851%2Fcollections%2FXXZ2J5VG%2Fitems%3Fkey%3DL89ZjIJ16okbNdo70PCkz3uG%26format%3Dbibtex%26limit%3D100"}},"downloads":0},"search_terms":["microstructure","based","finite","element","modeling","deformation","fracture","sicp","composites","zhang","ouyang","guo","li","fan","su","jiang","lavernia","schoenung","zhang"],"keywords":["damage mechanics","finite element analysis (fea)","interfacial strength","metal-matrix composites (mmcs)","published","reviewed"],"authorIDs":["uTxMcEcC4gwQfLeyA"],"dataSources":["fwNzNB5PwpuzC53kN","hiwKfY3EQ6YzYGH2Q","ngWwEutRfY7NatfFX"]}