generated by bibbase.org
  2018 (4)
Stability of cellular microstructure in laser powder bed fusion of 316L stainless steel. Bertoli, U. S.; MacDonald, B. E.; and Schoenung, J. M. Materials Science and Engineering: A. October 2018.
Stability of cellular microstructure in laser powder bed fusion of 316L stainless steel [link]Paper   doi   bibtex   abstract  
Anomalous Annealing Response of Directed Energy Deposited Type 304L Austenitic Stainless Steel. Smith, T. R.; Sugar, J. D.; Schoenung, J. M.; and Marchi, C. S. JOM,1–6. January 2018.
Anomalous Annealing Response of Directed Energy Deposited Type 304L Austenitic Stainless Steel [link]Paper   doi   bibtex   abstract  
Reversed compressive yield anisotropy in magnesium with microlaminated structure. Wang, X.; Jiang, L.; Zhang, D.; Beyerlein, I. J.; Mahajan, S.; Rupert, T. J.; Lavernia, E. J.; and Schoenung, J. M. Acta Materialia, 146: 12–24. March 2018.
Reversed compressive yield anisotropy in magnesium with microlaminated structure [link]Paper   doi   bibtex   abstract  
Hazardous Materials Characterization and Assessment. Lam, C. W.; He, H.; and Schoenung, J. M. In Meyers, R. A., editor(s), Encyclopedia of Sustainability Science and Technology, pages 1–21. Springer New York, New York, NY, 2018.
Hazardous Materials Characterization and Assessment [link]Paper   doi   bibtex  
  2017 (12)
Synthesis and Multi Scale Tribological Behavior of WC-Co/Nanodiamond Nanocomposites. Nieto, A.; Jiang, L.; Kim, J.; Kim, D.; and Schoenung, J. M. Scientific Reports, 7(1): 7060. August 2017.
Synthesis and Multi Scale Tribological Behavior of WC-Co/Nanodiamond Nanocomposites [link]Paper   doi   bibtex   abstract  
In-situ characterization of laser-powder interaction and cooling rates through high-speed imaging of powder bed fusion additive manufacturing. Scipioni Bertoli, U.; Guss, G.; Wu, S.; Matthews, M. J.; and Schoenung, J. M. Materials & Design, 135(Supplement C): 385–396. December 2017.
In-situ characterization of laser-powder interaction and cooling rates through high-speed imaging of powder bed fusion additive manufacturing [link]Paper   doi   bibtex   abstract  
Reinforcement size effects on the abrasive wear of boron carbide reinforced aluminum composites. Nieto, A.; Yang, H.; Jiang, L.; and Schoenung, J. M. Wear, 390-391(Supplement C): 228–235. November 2017.
Reinforcement size effects on the abrasive wear of boron carbide reinforced aluminum composites [link]Paper   doi   bibtex   abstract  
Proceedings of the 3rd Pan American Materials Congress. Meyers, M. A.; Benavides, H. A. C.; Brühl, S. P.; Colorado, H. A.; Dalgaard, E.; Elias, C. N.; Figueiredo, R. B.; Garcia-Rincon, O.; Kawasaki, M.; Langdon, T. G.; Mangalaraja, R. V.; Marroquin, M. C. G.; Rocha, A. d. C.; Schoenung, J. M.; Silva, A. C. e; Wells, M.; and Yang, W., editors. Springer, February 2017. doi: 10.1007/978-3-319-52132-9
bibtex   abstract  
Particulate Reinforced Aluminum Alloy Matrix Composites – a Review on the Effect of Microconstituents. Ma, K.; Lavernia, E. J.; and Schoenung, J. M. Reviews on Advanced Materials Science, 48(2): 91–104. April 2017.
bibtex   abstract  
Elevated temperature wear behavior of thermally sprayed WC-Co/nanodiamond composite coatings. Nieto, A.; Kim, J.; Penkov, O. V.; Kim, D.; and Schoenung, J. M. Surface and Coatings Technology, 315(Supplement C): 283–293. April 2017.
Elevated temperature wear behavior of thermally sprayed WC-Co/nanodiamond composite coatings [link]Paper   doi   bibtex   abstract  
Iron in solution with aluminum matrix after non-equilibrium processing: an atom probe tomography study. Saller, B. D.; Sha, G.; Yang, L. M.; Liu, F.; Ringer, S. P.; and Schoenung, J. M. Philosophical Magazine Letters, 97(3): 118–124. March 2017.
Iron in solution with aluminum matrix after non-equilibrium processing: an atom probe tomography study [link]Paper   doi   bibtex   abstract  
Environmental Sustainability of Laser Metal Deposition: The Role of Feedstock Powder and Feedstock Utilization Factor. Ma, K.; Smith, T.; Lavernia, E. J.; and Schoenung, J. M. Procedia Manufacturing, 7(Supplement C): 198–204. January 2017.
Environmental Sustainability of Laser Metal Deposition: The Role of Feedstock Powder and Feedstock Utilization Factor [link]Paper   doi   bibtex   abstract  
On the limitations of Volumetric Energy Density as a design parameter for Selective Laser Melting. Scipioni Bertoli, U.; Wolfer, A. J.; Matthews, M. J.; Delplanque, J. R.; and Schoenung, J. M. Materials & Design, 113(Supplement C): 331–340. January 2017.
On the limitations of Volumetric Energy Density as a design parameter for Selective Laser Melting [link]Paper   doi   bibtex   abstract  
In situ oxide dispersion strengthened tungsten alloys with high compressive strength and high strain-to-failure. Huang, L.; Jiang, L.; Topping, T. D.; Dai, C.; Wang, X.; Carpenter, R.; Haines, C.; and Schoenung, J. M. Acta Materialia, 122(Supplement C): 19–31. January 2017.
In situ oxide dispersion strengthened tungsten alloys with high compressive strength and high strain-to-failure [link]Paper   doi   bibtex   abstract  
Advancing Alternative Analysis: Integration of Decision Science. Malloy, T. F.; Zaunbrecher, V. M.; Batteate, C. M.; Blake, A.; Carroll, W. F.; Corbett, C. J.; Hansen, S. F.; Lempert, R. J.; Linkov, I.; McFadden, R.; Moran, K. D.; Olivetti, E.; Ostrom, N. K.; Romero, M.; Schoenung, J. M.; Seager, T. P.; Sinsheimer, P.; and Thayer, K. A. Environmental Health Perspectives, 125(6). June 2017.
Advancing Alternative Analysis: Integration of Decision Science [link]Paper   doi   bibtex   abstract  
An open framework for automated chemical hazard assessment based on GreenScreen for Safer Chemicals: A proof of concept. Wehage, K.; Chenhansa, P.; and Schoenung, J. M Integrated Environmental Assessment and Management, 13(1): 167–176. January 2017.
An open framework for automated chemical hazard assessment based on GreenScreen for Safer Chemicals: A proof of concept [link]Paper   doi   bibtex   abstract  
  2016 (16)
Influence of particle size and spatial distribution of B4C reinforcement on the microstructure and mechanical behavior of precipitation strengthened Al alloy matrix composites. Wu, C.; Ma, K.; Wu, J.; Fang, P.; Luo, G.; Chen, F.; Shen, Q.; Zhang, L.; Schoenung, J. M.; and Lavernia, E. J. Materials Science and Engineering: A, 675(Supplement C): 421–430. October 2016.
Influence of particle size and spatial distribution of B4C reinforcement on the microstructure and mechanical behavior of precipitation strengthened Al alloy matrix composites [link]Paper   doi   bibtex   abstract  
Deformation Twinning (Update). Zhang, D.; Jiang, L.; Zheng, B.; Schoenung, J. M.; Mahajan, S.; Lavernia, E. J.; and Beyerlein, I. J. In Reference Module in Materials Science and Materials Engineering. Elsevier, 2016.
Deformation Twinning (Update) [link]Paper   doi   bibtex   abstract  
Yield symmetry and reduced strength differential in Mg-2.5Y alloy. Zhang, D.; Wen, H.; Kumar, M. A.; Chen, F.; Zhang, L.; Beyerlein, I. J.; Schoenung, J. M.; Mahajan, S.; and Lavernia, E. J. Acta Materialia, 120(Supplement C): 75–85. November 2016.
Yield symmetry and reduced strength differential in Mg-2.5Y alloy [link]Paper   doi   bibtex   abstract  
Strategies to Approach Stabilized Plasticity in Metals with Diminutive Volume: A Brief Review. Hu, T.; Jiang, L.; Mukherjee, A. K.; Schoenung, J. M.; and Lavernia, E. J. Crystals, 6(8): 92. August 2016.
Strategies to Approach Stabilized Plasticity in Metals with Diminutive Volume: A Brief Review [link]Paper   doi   bibtex   abstract  
Review on laser powder injection additive manufacturing of novel alloys and composites. Zheng, B.; Yang, N.; Yee, J.; Gaiser, K.; Lu, W. Y.; Clemon, L.; Zhou, Y.; Lavernia, E. J.; and Schoenung, J. M. In volume 9738, pages 97380O, April 2016. International Society for Optics and Photonics
Review on laser powder injection additive manufacturing of novel alloys and composites [link]Paper   doi   bibtex   abstract  
Deformation of a ceramic/metal interface at the nanoscale. Jiang, L.; Hu, T.; Yang, H.; Zhang, D.; Topping, T.; J. Lavernia, E.; and M. Schoenung, J. Nanoscale, 8(20): 10541–10547. 2016.
Deformation of a ceramic/metal interface at the nanoscale [link]Paper   doi   bibtex  
Microstructure and mechanical behavior of NS/UFG aluminum prepared by cryomilling and spark plasma sintering. Liu, D.; Xiong, Y.; Li, P.; Lin, Y.; Chen, F.; Zhang, L.; Schoenung, J. M.; and Lavernia, E. J. Journal of Alloys and Compounds, 679(Supplement C): 426–435. September 2016.
Microstructure and mechanical behavior of NS/UFG aluminum prepared by cryomilling and spark plasma sintering [link]Paper   doi   bibtex   abstract  
Mechanistic investigation into the role of aluminum diffusion in the oxidation behavior of cryomilled NiCrAlY bond coat. Ma, K.; Tang, X.; and Schoenung, J. M. Journal of Wuhan University of Technology-Mater. Sci. Ed., 31(1): 35–43. February 2016.
Mechanistic investigation into the role of aluminum diffusion in the oxidation behavior of cryomilled NiCrAlY bond coat [link]Paper   doi   bibtex   abstract  
Microscale tribological behavior and in vitro biocompatibility of graphene nanoplatelet reinforced alumina. Nieto, A.; Zhao, J. M.; Han, Y.; Hwang, K. H.; and Schoenung, J. M. Journal of the Mechanical Behavior of Biomedical Materials, 61(Supplement C): 122–134. August 2016.
Microscale tribological behavior and in vitro biocompatibility of graphene nanoplatelet reinforced alumina [link]Paper   doi   bibtex   abstract  
Synthesis and mechanical behavior of nanostructured Al 5083/n-TiB2 metal matrix composites. Li, M.; Ma, K.; Jiang, L.; Yang, H.; Lavernia, E. J.; Zhang, L.; and Schoenung, J. M. Materials Science and Engineering: A, 656(Supplement C): 241–248. February 2016.
Synthesis and mechanical behavior of nanostructured Al 5083/n-TiB2 metal matrix composites [link]Paper   doi   bibtex   abstract  
3D Microstructure-based finite element modeling of deformation and fracture of SiCp/Al composites. Zhang, J.; Ouyang, Q.; Guo, Q.; Li, Z.; Fan, G.; Su, Y.; Jiang, L.; Lavernia, E. J.; Schoenung, J. M.; and Zhang, D. Composites Science and Technology, 123(Supplement C): 1–9. February 2016.
3D Microstructure-based finite element modeling of deformation and fracture of SiCp/Al composites [link]Paper   doi   bibtex   abstract  
Quasi-static and high-rate mechanical behavior of aluminum-based MMC reinforced with boron carbide of various length scales. Behm, N.; Yang, H.; Shen, J.; Ma, K.; Kecskes, L. J.; Lavernia, E. J.; Schoenung, J. M.; and Wei, Q. Materials Science and Engineering: A, 650(Supplement C): 305–316. January 2016.
Quasi-static and high-rate mechanical behavior of aluminum-based MMC reinforced with boron carbide of various length scales [link]Paper   doi   bibtex   abstract  
Disordered dislocation configuration in submicrometer Al crystal subjected to plane strain bending. Hu, T.; Ma, K.; Topping, T. D.; Jiang, L.; Zhang, D.; Mukherjee, A. K.; Schoenung, J. M.; and Lavernia, E. J. Scripta Materialia, 113(Supplement C): 35–38. March 2016.
Disordered dislocation configuration in submicrometer Al crystal subjected to plane strain bending [link]Paper   doi   bibtex   abstract  
Toughening of aluminum matrix nanocomposites via spatial arrays of boron carbide spherical nanoparticles. Jiang, L.; Yang, H.; Yee, J. K.; Mo, X.; Topping, T.; Lavernia, E. J.; and Schoenung, J. M. Acta Materialia, 103(Supplement C): 128–140. January 2016.
Toughening of aluminum matrix nanocomposites via spatial arrays of boron carbide spherical nanoparticles [link]Paper   doi   bibtex   abstract  
Coupling of dislocations and precipitates: Impact on the mechanical behavior of ultrafine grained Al–Zn–Mg alloys. Ma, K.; Hu, T.; Yang, H.; Topping, T.; Yousefiani, A.; Lavernia, E. J.; and Schoenung, J. M. Acta Materialia, 103(Supplement C): 153–164. January 2016.
Coupling of dislocations and precipitates: Impact on the mechanical behavior of ultrafine grained Al–Zn–Mg alloys [link]Paper   doi   bibtex   abstract  
Graphene Nano-Platelets Reinforced ZrO2 Consolidated by Spark Plasma Sintering. Vu, D.; Han, Y.; Chen, F.; Jin, D.; Schoenung, J. M.; and Lee, D. Science of Advanced Materials, 8(2): 312–317. February 2016.
doi   bibtex   abstract  
  2015 (21)
Metal/ceramic Interface Structures and Segregation Behavior in Aluminum-based Composites. Zhang, X.; Hu, T.; Rufner, J. F.; LaGrange, T.; Campbell, G. H.; Lavernia, E. J.; Schoenung, J. M.; and van Benthem, K. Microscopy and Microanalysis; Cambridge, 21: 1053–1054. August 2015.
Metal/ceramic Interface Structures and Segregation Behavior in Aluminum-based Composites [link]Paper   doi   bibtex  
Determination of Reliable Grain Boundary Orientation using Automated Crystallographic Orientation Mapping in the Transmission Electron Microscope. Zhang, X.; Rufner, J. F.; LaGrange, T.; Castro, R. H. R.; Schoenung, J. M.; Campell, G. H.; and van Benthem, K. Microscopy and Microanalysis; Cambridge, 21: 1663–1664. August 2015. pdf from : https://www.cambridge.org/core/services/aop-cambridge-core/content/view/DF812E62170DE8092C60F8723E8DFFCD/S1431927615009095a.pdf/div-class-title-determination-of-reliable-grain-boundary-orientation-using-automated-crystallographic-orientation-mapping-in-the-transmission-electron-microscope-div.pdf
Determination of Reliable Grain Boundary Orientation using Automated Crystallographic Orientation Mapping in the Transmission Electron Microscope [link]Paper   doi   bibtex  
TEM study on relationship between stacking faults and non-basal dislocations in Mg. Zhang, D.; Jiang, L.; Schoenung, J. M.; Mahajan, S.; and Lavernia, E. J. Philosophical Magazine, 95(34): 3823–3844. December 2015.
TEM study on relationship between stacking faults and non-basal dislocations in Mg [link]Paper   doi   bibtex   abstract  
On the thermal stability of ultrafine-grained Al stabilized by in-situ amorphous Al2O3 network. Balog, M.; Hu, T.; Krizik, P.; Castro Riglos, M. V.; Saller, B. D.; Yang, H.; Schoenung, J. M.; and Lavernia, E. J. Materials Science and Engineering: A, 648(Supplement C): 61–71. November 2015.
On the thermal stability of ultrafine-grained Al stabilized by in-situ amorphous Al2O3 network [link]Paper   doi   bibtex   abstract  
Two-Step SPD Processing of a Trimodal Al-Based Nano-Composite. Zhang, Y.; Sabbaghianrad, S.; Yang, H.; Topping, T. D.; Langdon, T. G.; Lavernia, E. J.; Schoenung, J. M.; and Nutt, S. R. Metallurgical and Materials Transactions A, 46(12): 5877–5886. December 2015.
Two-Step SPD Processing of a Trimodal Al-Based Nano-Composite [link]Paper   doi   bibtex   abstract  
An integrated approach for probing the structure and mechanical properties of diatoms: Toward engineered nanotemplates. Moreno, M. D.; Ma, K.; Schoenung, J.; and Dávila, L. P. Acta Biomaterialia, 25(Supplement C): 313–324. October 2015.
An integrated approach for probing the structure and mechanical properties of diatoms: Toward engineered nanotemplates [link]Paper   doi   bibtex   abstract  
Influence of interfaces on the mechanical behavior of SiC particulate-reinforced Al–Zn–Mg–Cu composites. Song, J.; Guo, Q.; Ouyang, Q.; Su, Y.; Zhang, J.; Lavernia, E. J.; Schoenung, J. M.; and Zhang, D. Materials Science and Engineering: A, 644(Supplement C): 79–84. September 2015.
Influence of interfaces on the mechanical behavior of SiC particulate-reinforced Al–Zn–Mg–Cu composites [link]Paper   doi   bibtex   abstract  
An Efficient and Cost-Effective Method for Preparing Transmission Electron Microscopy Samples from Powders. Wen, H.; Lin, Y.; Seidman, D. N.; Schoenung, J. M.; Rooyen, I. J. v.; and Lavernia, E. J. Microscopy and Microanalysis, 21(5): 1184–1194. October 2015.
An Efficient and Cost-Effective Method for Preparing Transmission Electron Microscopy Samples from Powders [link]Paper   doi   bibtex   abstract  
Metal/ceramic interface structures and segregation behavior in aluminum-based composites. Zhang, X.; Hu, T.; Rufner, J. F.; LaGrange, T. B.; Campbell, G. H.; Lavernia, E. J.; Schoenung, J. M.; and van Benthem, K. Acta Materialia, 95(Supplement C): 254–263. August 2015.
Metal/ceramic interface structures and segregation behavior in aluminum-based composites [link]Paper   doi   bibtex   abstract  
Stabilized plasticity in ultrahigh strength, submicron Al crystals. Hu, T.; Jiang, L.; Yang, H.; Ma, K.; Topping, T. D.; Yee, J.; Li, M.; Mukherjee, A. K.; Schoenung, J. M.; and Lavernia, E. J. Acta Materialia, 94(Supplement C): 46–58. August 2015.
Stabilized plasticity in ultrahigh strength, submicron Al crystals [link]Paper   doi   bibtex   abstract  
A comparative analysis of solubility, segregation, and phase formation in atomized and cryomilled Al–Fe alloy powders. Saller, B. D.; Hu, T.; Ma, K.; Kurmanaeva, L.; Lavernia, E. J.; and Schoenung, J. M. Journal of Materials Science, 50(13): 4683–4697. July 2015.
A comparative analysis of solubility, segregation, and phase formation in atomized and cryomilled Al–Fe alloy powders [link]Paper   doi   bibtex   abstract  
The Influence of Grain Size Determination Method on Grain Growth Kinetics Analysis. Hashemi-Sadraei, L.; Mousavi, S. E.; Lavernia, E. J.; and Schoenung, J. M. Advanced Engineering Materials, 17(11): 1598–1607. November 2015.
The Influence of Grain Size Determination Method on Grain Growth Kinetics Analysis [link]Paper   doi   bibtex   abstract  
Effects of Sb oxidation state on the densification and electrical properties of antimony-doped tin oxide ceramics. Li, M.; Cheng, P.; Luo, G.; Schoenung, J. M.; and Shen, Q. Journal of Materials Science: Materials in Electronics, 26(6): 4015–4020. June 2015.
Effects of Sb oxidation state on the densification and electrical properties of antimony-doped tin oxide ceramics [link]Paper   doi   bibtex   abstract  
Novel fabrication of bulk Al with gradient grain size distributions via powder metallurgy. Yang, H.; Lavernia, E. J.; and Schoenung, J. M. Philosophical Magazine Letters, 95(3): 177–186. March 2015.
Novel fabrication of bulk Al with gradient grain size distributions via powder metallurgy [link]Paper   doi   bibtex   abstract  
Influence of length-scales on spatial distribution and interfacial characteristics of B4C in a nanostructured Al matrix. Jiang, L.; Wen, H.; Yang, H.; Hu, T.; Topping, T.; Zhang, D.; Lavernia, E. J.; and Schoenung, J. M. Acta Materialia, 89(Supplement C): 327–343. May 2015.
Influence of length-scales on spatial distribution and interfacial characteristics of B4C in a nanostructured Al matrix [link]Paper   doi   bibtex   abstract  
Sintering behavior of spark plasma sintered alumina with graphene nanoplatelet reinforcement. Nieto, A.; Huang, L.; Han, Y.; and Schoenung, J. M. Ceramics International, 41(4): 5926–5936. May 2015.
Sintering behavior of spark plasma sintered alumina with graphene nanoplatelet reinforcement [link]Paper   doi   bibtex   abstract  
Strengthening mechanisms and deformation behavior of cryomilled Al–Cu–Mg–Ag alloy. Kurmanaeva, L.; Topping, T. D.; Wen, H.; Sugahara, H.; Yang, H.; Zhang, D.; Schoenung, J. M.; and Lavernia, E. J. Journal of Alloys and Compounds, 632(Supplement C): 591–603. May 2015.
Strengthening mechanisms and deformation behavior of cryomilled Al–Cu–Mg–Ag alloy [link]Paper   doi   bibtex   abstract  
Field assisted sintering of graphene reinforced zirconia ceramics. Chen, F.; Jin, D.; Tyeb, K.; Wang, B.; Han, Y.; Kim, S.; Schoenung, J. M.; Shen, Q.; and Zhang, L. Ceramics International, 41(4): 6113–6116. May 2015.
Field assisted sintering of graphene reinforced zirconia ceramics [link]Paper   doi   bibtex   abstract  
Waste Management of Printed Wiring Boards: A Life Cycle Assessment of the Metals Recycling Chain from Liberation through Refining. Xue, M.; Kendall, A.; Xu, Z.; and Schoenung, J. M. Environmental Science & Technology, 49(2): 940–947. January 2015.
Waste Management of Printed Wiring Boards: A Life Cycle Assessment of the Metals Recycling Chain from Liberation through Refining [link]Paper   doi   bibtex   abstract  
Micro-strain Evolution and Toughening Mechanisms in a Trimodal Al-Based Metal Matrix Composite. Zhang, Y.; Topping, T. D.; Yang, H.; Lavernia, E. J.; Schoenung, J. M.; and Nutt, S. R. Metallurgical and Materials Transactions A, 46(3): 1196–1204. March 2015.
Micro-strain Evolution and Toughening Mechanisms in a Trimodal Al-Based Metal Matrix Composite [link]Paper   doi   bibtex   abstract  
Spark Plasma Sintering and Densification Mechanisms of Conductive Ceramics under Coupled Thermal/Electric Fields. Chen, F.; Yang, S.; Wu, J.; Galaviz Perez, J. A.; Shen, Q.; Schoenung, J. M.; Lavernia, E. J.; and Zhang, L. Journal of the American Ceramic Society, 98(3): 732–740. March 2015.
Spark Plasma Sintering and Densification Mechanisms of Conductive Ceramics under Coupled Thermal/Electric Fields [link]Paper   doi   bibtex   abstract  
  2013 (1)
Potential Environmental Impacts from the Metals in Incandescent, Compact Fluorescent Lamp (CFL), and Light-Emitting Diode (LED) Bulbs. Lim, S.; Kang, D.; Ogunseitan, O. A.; and Schoenung, J. M. Environmental Science & Technology, 47(2): 1040–1047. January 2013.
Potential Environmental Impacts from the Metals in Incandescent, Compact Fluorescent Lamp (CFL), and Light-Emitting Diode (LED) Bulbs [link]Paper   doi   bibtex   abstract  
  2005 (3)
Compressive Behavior of a Novel Aluminum Matrix Composite. Ye, J.; Han, B. Q.; Lee, Z.; Ahn, B.; Nutt, S. R.; and Schoenung, J. M. In Bieler, T. R.; Carsley, J. E.; Fraser, H. L.; Sears, J. W.; and Smugeresky, J. E., editor(s), Materials Processing and Manufacturing Division Sixth Global Innovations Proceedings, Trends in Materials and Manufacuring Technologies for Transportation Industry and Powder Metallurgy Research and Development in the Transportation Industry, pages 383–389, 2005.
bibtex  
Extended Thermal Cycle Lifetime in Thermal Barrier Coatings with Bond Coats made from Cryomilled Powders. Ajdelsztajn, L.; Tang, F.; Kim, G. E.; Provenzano, V.; Dallek, S.; and Schoenung, J. M. In Seal, S.; Dahotre, N. B.; Moore, J.; Agarwal, A.; and Suryanarayana, T., editor(s), Surface Engineering in Materials Science III, pages 229–239. TMS, 2005.
bibtex  
Assessment of Costs and Revenues for an Electronic Waste Materials Recovery Facility. Kang, H.; and Schoenung, J. M. In EPD Congress 2005, pages 837–844, 2005.
bibtex  
  2004 (2)
Green Electronics: A U.S. Perspective on Policy, Risk, and Product Design. Schoenung, J. M.; Ogunseitan, O. A.; Saphores, J. M.; and Shapiro, A. A. In Electronics Goes Green 2004+, pages 83–88, Stuttgart, Germany, 2004.
bibtex   abstract  
Effects of Cryomilling on the Oxidation of Thermally Sprayed MCrAlY. Tang, F.; Ajdelsztajn, L.; and Schoenung, J. M. In Proceedings of the International Thermal Spray Conference, Osaka Japan, May 2004. ASM International
bibtex  
  2003 (6)
Lead Free Electronics: Current and Pending Legislation. Schoenung, J. M. In Environmental Issues and Waste Management Technologies VIII, pages 75–82. American Ceramic Society, 2003.
bibtex  
Low Temperature Synthesis of Boron Carbide Reinforced Nanocrystalline Aluminum Composites. He, J.; Ye, J.; and Schoenung, J. M. In Affordable Metal Matrix Composites. TMS Fall Meeting, Chicago, IL, November 2003.
bibtex  
Microstructure and Recrystallization Behavior of Boron Carbide Reinforced Nanocrystalline Aluminum Composites. He, J.; Ye, J.; Witkin, D.; and Schoenung, J. M. In Affordable Metal Matrix Composites. TMS Fall Meeting, Chicago, IL, November 2003.
bibtex  
Application of a Modified Production Quality Tool for Environmental Impact Assessment of Lead-Free Solder Alternatives. Zhou, X.; and Schoenung, J. M. In Sustainability Metrics. AIChE Fall Meeting, San Francisco, CA, November 2003.
bibtex  
Grain Refinement Mechanism during Cryomilling in the Presence of Hard Particles. Chung, K. H.; Lavernia, E. J.; and Schoenung, J. M. In Proceedings of the 2003 International Conference on Powder Metallurgy and Particulate Materials (PM2), Las Vegas, NV, June 2003.
bibtex  
Nanocrystalline MCrAlY Bond Coat for Thermal Barrier Coating Applications. Ajdelsztajn, L.; He, J.; Kim, G.; Provenzano, V.; Lavernia, E.; and Schoenung, J. M. In Seal, S.; Dahotre, N. B.; Moore, J.; Agarwal, A.; and Suryanarayana, S., editor(s), Surface Engineering in Materials Science II, pages 71–80. TMS Annual Meeting and Exhibition, San Diego, CA, March 2003.
bibtex  
  2002 (1)
Synthesis of Nanocrystalline Ni Coatings Reinforced with Ceramic Nanoparticles. He, J.; and Schoenung, J. M. In Ceramic Nanomaterials and Nanotechnology, volume 137, of Ceramic Transactions, pages 143–159. American Ceramic Society, 2002.
bibtex  
  2001 (1)
Advanced Structural Ceramics: Markets and Production Costs. Schoenung, K. H. J. In Cahn, R. W.; Flemings, M. C.; Ilschner, B.; Kramer, E. J.; and Mahajan, S., editor(s), Encyclopedia of Materials: Science and Technology, volume 10. Pergamon, Oxford, UK, 2001.
bibtex  
  1999 (2)
Advanced Silicon Nitride Components: A Cost Analysis. Schoenung, J. M.; Kraft, E. H.; and Ashkin, D. Ceramic Engineering and Science Proceedings, 20(4): 497–504. 1999.
Advanced Silicon Nitride Components: A Cost Analysis [link]Paper   doi   bibtex   abstract  
Cost Modeling and Analysis for Advanced Structural Silicon Nitride Turbomachinery Ceramics. Schoenung, J. M. Ceramic Engineering and Science Proceedings, 20(3): 209–216. 1999.
bibtex  
  1997 (1)
Economic analysis of alternative fabrication approaches for advanced structural silicon nitride ceramics. Schoenung, J. M.; Tuazon, H.; Santos, M.; Masseth, R.; Draskovich, B.; and Mascarin, A. In Proceedings of the Julian Szekely Memorial Symposium on Materials Processing, pages 631–651, 1997.
bibtex  
  1995 (1)
Process cost modeling - A summary. Schoenung, J. M. In Conference Proceedings, Smart Processing of Materials Symposium, 27th International SAMPE Technical Conference, pages 1–10, Albuquerque, NM, October 1995.
bibtex  
  1991 (3)
The Economics of Silicon Carbide Whisker Fabrication. Schoenung, J. M. Ceramic Engineering and Science Proceedings, 12(9-10): 1943–51. October 1991.
The Economics of Silicon Carbide Whisker Fabrication [link]Paper   bibtex  
Calcium phosphate ceramics as bone substitutes. Laverna, C.; and Schoenung, J. M. American Ceramic Society Bulletin, 70(1): 95–100. 1991.
bibtex  
Analysis of the economics of silicon nitride powder production. Schoenung, J. M. American Ceramic Society Bulletin, 70(1): 112–116. 1991.
bibtex  
  1989 (2)
Markets for Advanced Ceramics in Engines. Schoenung, J. M. Materials and Society, 13(3): 233–246. 1989.
bibtex   abstract  
Economic feasibility of producing metal matrix composites[MMC's] by spray atomization and deposition. Jacob, J. E.; Schoenung, J.; and Lavernia, E. J. In Proceedings of the University-Industry Advanced Materials Conference, pages 154–63, Denver, CO, March 1989.
bibtex  
  1988 (2)
Markets for Advanced Ceramics in Internal Combustion Engines. Schoenung, J. M. In Proceedings of the Third International Symposium on Ceramic Materials and Components for Engines, volume 13:3, Las Vegas, NV, November 1988.
Markets for Advanced Ceramics in Internal Combustion Engines [link]Paper   bibtex  
Silicon nitride powders: investigating the costs of production. Schoenung, J. M. In Proceedings of the International Symposium on the Production and Processing of Fine Particles, Montreal, August 1988.
Silicon nitride powders: investigating the costs of production [link]Paper   doi   bibtex   abstract  
  1987 (2)
Cost Modeling RS Powders Produced by Inert Gas Atomization. Jacob, J. E.; Schoenung, J. M.; Lavernia, E. J.; Clark, J. P.; and Grant, N. J. JOM, 39(10): 19–21. October 1987.
Cost Modeling RS Powders Produced by Inert Gas Atomization [link]Paper   doi   bibtex  
Gallium Demand for Electronic Devices. Schoenung, J. M.; and Clark, J. P. JOM, 39(6): 36–38. June 1987.
Gallium Demand for Electronic Devices [link]Paper   doi   bibtex  
  1986 (1)
Simulations of the Potential Market for Ceramic Engine Components. Schoenung, J.; Rothman, E.; Bowen, H.; and Clark, J. Verlag Deutsche Keramische Gesellschaft,,1091–1098. 1986.
bibtex  
  1985 (2)
Properties, Costs and Applications of Ceramics and Ceramic Matrix Composites. Schoenung, J. M.; Rothman, E. P.; and Clark, J. P. In Washington D.C., December 1985.
bibtex  
Case Study on Utilization of Ceramics in Heat Engines. Schoenung, J. M.; and Moteff, J. In Washington D.C., October 1985.
bibtex